lkml.org 
[lkml]   [2022]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/3] usb: dwc3: Refactor PHY logic to support Multiport Controller
From

On 5/31/2022 5:56 PM, Pavan Kondeti wrote:
> Hi Harsh,
>
> On Tue, May 31, 2022 at 01:50:17PM +0530, Harsh Agarwal wrote:
>> Currently the DWC3 driver supports only single port controller
>> which requires at most 2 PHYs ie HS and SS PHYs.
>>
>> But some SOCs have a "multiport" USB DWC3 controller where a
>> single controller supports multiple ports and each port have
>> their own PHYs. Refactor PHY logic to support the same.
>>
>> Signed-off-by: Harsh Agarwal <quic_harshq@quicinc.com>
>> ---
>> drivers/usb/dwc3/core.c | 400 +++++++++++++++++++++++++++++++++-------------
>> drivers/usb/dwc3/core.h | 12 +-
>> drivers/usb/dwc3/drd.c | 16 +-
>> drivers/usb/dwc3/gadget.c | 4 +-
>> 4 files changed, 305 insertions(+), 127 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 5734219..5cc799e 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -120,7 +120,7 @@ static void __dwc3_set_mode(struct work_struct *work)
>> {
>> struct dwc3 *dwc = work_to_dwc(work);
>> unsigned long flags;
>> - int ret;
>> + int i, ret;
>> u32 reg;
>>
> <snip>
>
>> -static int dwc3_core_get_phy(struct dwc3 *dwc)
>> +static struct usb_phy *dwc3_core_get_phy_by_handle_with_node(struct device *dev,
>> + const char *phandle, u8 index, struct device_node *lookup_node)
>> +{
>> + struct device_node *node;
>> + struct usb_phy *phy;
>> +
>> + node = of_parse_phandle(lookup_node, phandle, index);
>> + if (!node) {
>> + dev_err(dev, "failed to get %s phandle in %pOF node\n", phandle,
>> + dev->of_node);
>> + return ERR_PTR(-ENODEV);
>> + }
>> + phy = devm_usb_get_phy_by_node(dev, node, NULL);
>> + of_node_put(node);
>> + return phy;
>> +}
> Remove this function definition, since we moved this to PHY library.
Got it removed in the latest PS v2
>
>> +
>> +static int dwc3_count_phys(struct dwc3 *dwc, struct device_node *lookup_node)
>> +{
>> + int count;
>> +
>> + count = of_count_phandle_with_args(lookup_node, "phys", NULL);
>> +
>> + if (count == -ENOENT)
>> + count = of_count_phandle_with_args(lookup_node, "usb-phy", NULL);
>> +
>> + if (count == 1) {
>> + dwc->num_usb2_phy++;
>> + } else if (count == 2) {
>> + dwc->num_usb2_phy++;
>> + dwc->num_usb3_phy++;
>> + } else {
>> + return count;
>> + }
>> + return 0;
>> +}
>> +
>> +static int dwc3_extract_num_phys(struct dwc3 *dwc)
>> +{
>> + struct device_node *ports, *port;
>> + int ret;
>> +
>> + /* Find if any "multiport" child is present inside DWC3*/
>> + for_each_available_child_of_node(dwc->dev->of_node, ports) {
>> + if (!strcmp(ports->name, "multiport"))
>> + break;
>> + }
>> + if (!ports) {
>> + dwc->num_usb2_phy = 1;
>> + dwc->num_usb3_phy = 1;
>> + } else {
>> + for_each_available_child_of_node(ports, port) {
>> + ret = dwc3_count_phys(dwc, port);
>> + if (ret)
>> + return ret;
> If you break the loop, you have to call of_node_put() explicitly.
Done. P;ease check v2
>
>> + }
>> + }
>> + dev_info(dwc->dev, "Num of HS and SS PHY are %u %u\n", dwc->num_usb2_phy,
>> + dwc->num_usb3_phy);
> If I declare the multiport node don't specify any phys for any of the ports,
> we end up coming here with dwc->num_usb2_phy = dwc->num_usb3_phy = 0. That is
> a problem since we access dwc->usb2_phy[0] directly. Can we bail out in that
> case?
We have mandated to use either usb-phy or Generic phy inside the child nodes
of multiport.
>
>> +
>> + dwc->usb2_phy = devm_kzalloc(dwc->dev,
>> + sizeof(*dwc->usb2_phy) * dwc->num_usb2_phy, GFP_KERNEL);
>> + if (!dwc->usb2_phy)
>> + return -ENOMEM;
>> +
>> + dwc->usb3_phy = devm_kzalloc(dwc->dev,
>> + sizeof(*dwc->usb3_phy) * dwc->num_usb3_phy, GFP_KERNEL);
>> + if (!dwc->usb3_phy)
>> + return -ENOMEM;
>> +
>> + dwc->usb2_generic_phy = devm_kzalloc(dwc->dev,
>> + sizeof(*dwc->usb2_generic_phy) * dwc->num_usb2_phy, GFP_KERNEL);
>> + if (!dwc->usb2_generic_phy)
>> + return -ENOMEM;
>> +
>> + dwc->usb3_generic_phy = devm_kzalloc(dwc->dev,
>> + sizeof(*dwc->usb3_generic_phy) * dwc->num_usb3_phy, GFP_KERNEL);
>> + if (!dwc->usb3_generic_phy)
>> + return -ENOMEM;
>> +
>> + return 0;
>> +}
>> +
>> +static int dwc3_core_get_phy_by_node(struct dwc3 *dwc,
>> + struct device_node *lookup_node, int i)
>> {
>> struct device *dev = dwc->dev;
>> - struct device_node *node = dev->of_node;
>> - int ret;
>> + int ret;
>>
>> - if (node) {
>> - dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
>> - dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
>> + if (lookup_node) {
>> + dwc->usb2_phy[i] = devm_of_usb_get_phy_by_phandle(dev,
>> + "usb-phy", 0, lookup_node);
>> + dwc->usb3_phy[i] = devm_of_usb_get_phy_by_phandle(dev,
>> + "usb-phy", 1, lookup_node);
>> } else {
>> - dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
>> - dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
>> + dwc->usb2_phy[i] = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
>> + dwc->usb3_phy[i] = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
>> }
>>
>> - if (IS_ERR(dwc->usb2_phy)) {
>> - ret = PTR_ERR(dwc->usb2_phy);
>> + if (IS_ERR(dwc->usb2_phy[i])) {
>> + ret = PTR_ERR(dwc->usb2_phy[i]);
>> if (ret == -ENXIO || ret == -ENODEV)
>> - dwc->usb2_phy = NULL;
>> + dwc->usb2_phy[i] = NULL;
>> else
>> return dev_err_probe(dev, ret, "no usb2 phy configured\n");
>> }
>>
>> - if (IS_ERR(dwc->usb3_phy)) {
>> - ret = PTR_ERR(dwc->usb3_phy);
>> + if (IS_ERR(dwc->usb3_phy[i])) {
>> + ret = PTR_ERR(dwc->usb3_phy[i]);
>> if (ret == -ENXIO || ret == -ENODEV)
>> - dwc->usb3_phy = NULL;
>> + dwc->usb3_phy[i] = NULL;
>> else
>> return dev_err_probe(dev, ret, "no usb3 phy configured\n");
>> }
>>
>> - dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
>> - if (IS_ERR(dwc->usb2_generic_phy)) {
>> - ret = PTR_ERR(dwc->usb2_generic_phy);
>> - if (ret == -ENOSYS || ret == -ENODEV)
>> - dwc->usb2_generic_phy = NULL;
>> + dwc->usb2_generic_phy[i] = devm_of_phy_get(dev, lookup_node, "usb2-phy");
>> + if (IS_ERR(dwc->usb2_generic_phy[i])) {
>> + ret = PTR_ERR(dwc->usb2_generic_phy[i]);
>> + if (ret == -ENODEV)
>> + dwc->usb2_generic_phy[i] = NULL;
>> else
>> return dev_err_probe(dev, ret, "no usb2 phy configured\n");
>> }
>>
>> - dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
>> - if (IS_ERR(dwc->usb3_generic_phy)) {
>> - ret = PTR_ERR(dwc->usb3_generic_phy);
>> - if (ret == -ENOSYS || ret == -ENODEV)
>> - dwc->usb3_generic_phy = NULL;
>> + dwc->usb3_generic_phy[i] = devm_of_phy_get(dev, lookup_node, "usb3-phy");
>> + if (IS_ERR(dwc->usb3_generic_phy[i])) {
>> + ret = PTR_ERR(dwc->usb3_generic_phy[i]);
>> + if (ret == -ENODEV)
>> + dwc->usb3_generic_phy[i] = NULL;
>> else
>> return dev_err_probe(dev, ret, "no usb3 phy configured\n");
>> }
>> + return 0;
>> +}
>> +
>> +static int dwc3_core_get_phy(struct dwc3 *dwc)
>> +{
>> + struct device *dev = dwc->dev;
>> + struct device_node *node = dev->of_node;
>> + struct device_node *ports, *port;
>> + int ret, i = 0;
>> +
>> + ret = dwc3_extract_num_phys(dwc);
>> + if (ret) {
>> + dev_err(dwc->dev, "Unable to extract number of PHYs\n");
>> + return ret;
>> + }
>> +
>> + /* Find if any "multiport" child is present inside DWC3*/
>> + for_each_available_child_of_node(node, ports) {
>> + if (!strcmp(ports->name, "multiport"))
>> + break;
>> + }
>> +
>> + if (!ports) {
>> + ret = dwc3_core_get_phy_by_node(dwc, node, 0);
>> + if (ret)
>> + return ret;
>> + } else {
>> + for_each_available_child_of_node(ports, port) {
>> + ret = dwc3_core_get_phy_by_node(dwc, port, i);
>> + if (ret)
>> + return ret;
>> + i++;
>> + }
>> + }
>>
> How does this work actually for a case where I have 4 ports with hs_phy=4 and
> ss_phy=2. Here we end up calling i = {0, 1, 2, 3} and accessing un-allocated
> ss phy instances in dwc3_core_get_phy_by_node(). you should also handle the
> case where first two ports are HS only and last two ports are both HS and SS.
Thanks for this endcase. Got it rectified in the new PS v2.
Yes lets suppose a Quadport controller having the first two
ports as HS only and last two ports as SS+HS capable.
Then proper indexing for SS PHY should also be taken care of.
Even though SS phy belongs to 3rd port, it's index will start with 0.
This is because for each SS PHY we have to properly map to
USBPIPECTL, PORTSC registers.
>
> Thanks,
> Pavan

\
 
 \ /
  Last update: 2022-06-05 20:30    [W:0.095 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site