lkml.org 
[lkml]   [2022]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 00/15] Canaan devicetree fixes
Date
On Wed, Jun 29, 2022 at 07:43:29PM +0100, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
>
> Hey all,
> This series should rid us of dtbs_check errors for the RISC-V Canaan k210
> based boards. To make keeping it that way a little easier, I changed the
> Canaan devicetree Makefile so that it would build all of the devicetrees
> in the directory if SOC_CANAAN.
>
> I *DO NOT* have any Canaan hardware so I have not tested any of this in
> action. Since I sent v1, I tried to buy some since it's cheap - but could
> out of the limited stockists none seemed to want to deliver to Ireland :(
> I based the series on next-20220617.
>

I first tried to apply your series on top of next-20220630,
but was greeted by a bunch of different warnings on boot,
including endless RCU stall warnings.
However, even when booting next-20220630 without your patches,
I got the same warnings and RCU stall.

So I tested your series on top of v5.19-rc4 +
commit 0397d50f4cad ("spi: dt-bindings: Move 'rx-sample-delay-ns' to
spi-peripheral-props.yaml") cherry-picked,
(in order to avoid conflicts when applying your series,)
and the board was working as intended, no warnings or RCU stalls.

I tried both booting both via u-boot (with u-boots DTB)
and booting the kernel (with an initrd) directly.
I could successfully read data from the MMC in both cases.

Therefore:
Tested-by: Niklas Cassel <niklas.cassel@wdc.com>
\
 
 \ /
  Last update: 2022-06-30 18:31    [W:0.156 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site