lkml.org 
[lkml]   [2022]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dmaengine: pl330: Set DMA_INTERRUPT capability and add related callback
Date
With the verification for DMA_INTERRUPT capability added to the dmatest
module, the dmatest fails to start for various channels of pl330 dma
controller. So, set the DMA_INTERRUPT capability and add the required
callback method to set the transaction descriptor flags.

Signed-off-by: Vivek Gautam <vivek.gautam@arm.com>
---
drivers/dma/pl330.c | 24 ++++++++++++++++++++
1 file changed, 24 insertions(+)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 858400e42ec0..b80e48f0970b 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2757,6 +2757,28 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
return &desc->txd;
}

+static struct dma_async_tx_descriptor *
+pl330_dma_prep_interrupt(struct dma_chan *chan, unsigned long flags)
+{
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ struct dma_pl330_desc *desc;
+
+ if (unlikely(!pch))
+ return NULL;
+
+ desc = pl330_get_desc(pch);
+ if (!desc) {
+ dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
+ __func__, __LINE__);
+ return NULL;
+ }
+
+ /* Set the flags that are passed downstream */
+ desc->txd.flags = flags;
+
+ return &desc->txd;
+}
+
static struct dma_async_tx_descriptor *
pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
dma_addr_t src, size_t len, unsigned long flags)
@@ -3111,6 +3133,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
}

dma_cap_set(DMA_MEMCPY, pd->cap_mask);
+ dma_cap_set(DMA_INTERRUPT, pd->cap_mask);
if (pcfg->num_peri) {
dma_cap_set(DMA_SLAVE, pd->cap_mask);
dma_cap_set(DMA_CYCLIC, pd->cap_mask);
@@ -3121,6 +3144,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
pd->device_free_chan_resources = pl330_free_chan_resources;
pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
+ pd->device_prep_dma_interrupt = pl330_dma_prep_interrupt;
pd->device_tx_status = pl330_tx_status;
pd->device_prep_slave_sg = pl330_prep_slave_sg;
pd->device_config = pl330_config;
--
2.17.1
\
 
 \ /
  Last update: 2022-06-29 11:32    [W:2.082 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site