lkml.org 
[lkml]   [2022]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] i2c: imx: add irqf_no_suspend
Date
Hi All,

> Hi everyone,

> > > The i2c irq is masked when pcie starts a i2c transfer process
> > > during noirq suspend stage. As a result, i2c transfer fails.
> > > To solve the problem, IRQF_NO_SUSPEND is added to i2c bus.
> > >
> > > Signed-off-by: Gao Pan <b54642@freescale.com>
> > > Signed-off-by: Fugang Duan <B38611@freescale.com>
> > > Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>

> The SoB from Alifer Moraes is missing, too.

> > > goto rpm_disable;
> > >
> > >      /* Request IRQ */
> > > -   ret = request_threaded_irq(irq, i2c_imx_isr, NULL, IRQF_SHARED,
> > > +   ret = request_threaded_irq(irq, i2c_imx_isr, NULL,
> > > +                              IRQF_SHARED | IRQF_NO_SUSPEND,
> > >                                 pdev->name, i2c_imx);
> > >      if (ret) {
> > >              dev_err(&pdev->dev, "can't claim irq %d\n", irq);
> >
> >
> > I stumbled across Documentation/power/suspend-and-interrupts.rst which states:
> > > For this reason, using IRQF_NO_SUSPEND and IRQF_SHARED at the
> > > same time should be avoided.
> > Given this IMHO at least a comment should be inserted why this is fine. I dont
> > have a full picture about the situation, but to me it seems there is a
> > reference missing, or why/how does some PCIe start some I2C transfer when the
> > controller is suspended already? Do I miss something?

This patch has been introduced to fix the following behavior.
HW conditions
- Variscite DART-MX8M on DT8MCustomBoard v2.x or higher.
- The PCIe connector uses a reset pin coming from a GPIO expander connected to the I2C bus.
SW behavior
- Upon wake-up, the PCIe try toggling the reset pins, but the GPIO expander / I2C bus are still suspended, leading to a PCIe wake-up failure.
From our investigation, we can't identify a way to postpone PCIe wake-up after I2C wake-up.
This patch is still present in latest NXP kernel 5.15, but please let me know if you think this should be approached / fixed in a different way.

Thanks
Regards
Pier


> Thank you for this comment, Alexander. I second you, this needs
> explanation.

> Happy hacking,
> Wolfram

\
 
 \ /
  Last update: 2022-06-20 16:17    [W:2.155 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site