lkml.org 
[lkml]   [2022]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] i2c: aspeed: do not mask SLAVE_MATCH
Date
From: Klaus Jensen <k.jensen@samsung.com>

When commit f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed
I2C driver") added slave mode support, the SLAVE_MATCH interrupt bit
(bit 7) was not added to INTR_ALL and so will never be set by the Aspeed
I2C controller.

Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
---
I am working on slave mode in QEMU and noticed that the device would not
generate the SLAVE_ADDR_RX_MATCH interrupt. This patch fixes it, but I
do not have a spec sheet on the Aspeed, so I am not sure if this is the
intended behavior?

drivers/i2c/busses/i2c-aspeed.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 771e53d3d197..7f432babcd72 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -86,6 +86,7 @@
#define ASPEED_I2CD_INTR_ALL \
(ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \
ASPEED_I2CD_INTR_BUS_RECOVER_DONE | \
+ ASPEED_I2CD_INTR_SLAVE_MATCH | \
ASPEED_I2CD_INTR_SCL_TIMEOUT | \
ASPEED_I2CD_INTR_ABNORMAL | \
ASPEED_I2CD_INTR_NORMAL_STOP | \
--
2.36.1
\
 
 \ /
  Last update: 2022-06-02 07:49    [W:0.843 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site