[lkml]   [2022]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH net-next v2 0/3] dt-bindings: dp83867: add binding for io_impedance_ctrl nvmem cell

This series was applied to netdev/net-next.git (master)
by Jakub Kicinski <>:

On Tue, 14 Jun 2022 10:46:09 +0200 you wrote:
> We have a board where measurements indicate that the current three
> options - leaving IO_IMPEDANCE_CTRL at the reset value (which is
> factory calibrated to a value corresponding to approximately 50 ohms)
> or using one of the two boolean properties to set it to the min/max
> value - are too coarse.
> This series adds a device tree binding for an nvmem cell which can be
> populated during production with a suitable value calibrated for each
> board, and corresponding support in the driver. The second patch adds
> a trivial phy wrapper for dev_err_probe(), used in the third.
> [...]

Here is the summary with links:
- [net-next,v2,1/3] dt-bindings: dp83867: add binding for io_impedance_ctrl nvmem cell
- [net-next,v2,2/3] linux/phy.h: add phydev_err_probe() wrapper for dev_err_probe()
- [net-next,v2,3/3] net: phy: dp83867: implement support for io_impedance_ctrl nvmem cell

You are awesome, thank you!
Deet-doot-dot, I am a bot.

 \ /
  Last update: 2022-06-17 05:51    [W:0.336 / U:6.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site