lkml.org 
[lkml]   [2022]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v20 2/5] usb: dwc3: core: Host wake up support from system suspend
On Mon, Jun 06, 2022 at 01:45:51PM -0700, Matthias Kaehlcke wrote:
> On Thu, Jun 02, 2022 at 12:35:42PM -0700, Matthias Kaehlcke wrote:
> > Hi Krishna,
> >
> > with this version I see xHCI errors on my SC7180 based system, like
> > these:
> >
> > [ 65.352605] xhci-hcd xhci-hcd.13.auto: xHC error in resume, USBSTS 0x401, Reinit
> >
> > [ 101.307155] xhci-hcd xhci-hcd.13.auto: WARN: xHC CMD_RUN timeout
> >
> > After resume a downstream hub isn't enumerated again.
> >
> > So far I didn't see those with v13, but I aso saw the first error with
> > v16.
>
> It also happens with v13, but only when a wakeup capable vUSB <= 2
> device is plugged in. Initially I used a wakeup capable USB3 to
> Ethernet adapter to trigger the wakeup case, however older versions
> of this series that use usb_wakeup_enabled_descendants() to check
> for wakeup capable devices didn't actually check for vUSB > 2
> devices.
>
> So the case were the controller/PHYs is powered down works, but
> the controller is unhappy when the runtime PM path is used during
> system suspend.

The issue isn't seen on all systems using dwc3-qcom and the problem starts
during probe(). The expected probe sequence is something like this:

dwc3_qcom_probe
dwc3_qcom_of_register_core
dwc3_probe

if (device_can_wakeup(&qcom->dwc3->dev))
...

The important part is that device_can_wakeup() is called after dwc3_probe()
has completed. That's what I see on a QC SC7280 system, where wakeup is
generally working with these patches.

However on a QC SC7180 system dwc3_probe() is deferred and only executed after
dwc3_qcom_probe(). As a result the device_can_wakeup() call returns false.
With that the controller/driver ends up in an unhappy state after system
suspend.

Probing is deferred on SC7180 because device_links_check_suppliers() finds
that '88e3000.phy' isn't ready yet.

\
 
 \ /
  Last update: 2022-06-13 21:42    [W:0.128 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site