Messages in this thread Patch in this message | | | From | Andy Shevchenko <> | Subject | [PATCH v1 1/1] phy: ti: tusb1210: Don't check for write errors when powering on | Date | Mon, 13 Jun 2022 19:08:48 +0300 |
| |
On some platforms, like Intel Merrifield, the writing values during power on may timeout:
tusb1210 dwc3.0.auto.ulpi: error -110 writing val 0x41 to reg 0x80 phy phy-dwc3.0.auto.ulpi.0: phy poweron failed --> -110 dwc3 dwc3.0.auto: error -ETIMEDOUT: failed to initialize core dwc3: probe of dwc3.0.auto failed with error -110
which effectively fails the probe of the USB controller. Drop the check as it was before the culprit commit (see Fixes tag).
Fixes: 09a3512681b3 ("phy: ti: tusb1210: Improve ulpi_read()/_write() error checking") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/phy/ti/phy-tusb1210.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/ti/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c index c3ab4b69ea68..669c13d6e402 100644 --- a/drivers/phy/ti/phy-tusb1210.c +++ b/drivers/phy/ti/phy-tusb1210.c @@ -105,8 +105,9 @@ static int tusb1210_power_on(struct phy *phy) msleep(TUSB1210_RESET_TIME_MS); /* Restore the optional eye diagram optimization value */ - return tusb1210_ulpi_write(tusb, TUSB1210_VENDOR_SPECIFIC2, - tusb->vendor_specific2); + tusb1210_ulpi_write(tusb, TUSB1210_VENDOR_SPECIFIC2, tusb->vendor_specific2); + + return 0; } static int tusb1210_power_off(struct phy *phy) -- 2.35.1
| |