lkml.org 
[lkml]   [2022]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 1/2] dt-bindings: arm: mediatek: Add new bindings of MediaTek frequency hopping
Date
This patch adds the new binding documentation for frequency hopping
and spread spectrum clocking control on MT8186.

Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.com>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
---
.../bindings/arm/mediatek/mediatek,fhctl.yaml | 149 ++++++++++++++++++
1 file changed, 149 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,fhctl.yaml

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,fhctl.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,fhctl.yaml
new file mode 100644
index 000000000000..9cb04bed9e86
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,fhctl.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,fhctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek frequency hopping and spread spectrum clocking control
+
+maintainers:
+ - Edward-JW Yang <edward-jw.yang@mediatek.com>
+
+description: |
+ Frequency hopping control (FHCTL) is a piece of hardware that control
+ some PLLs to adopt "hopping" mechanism to adjust their frequency.
+ Spread spectrum clocking (SSC) is another function provided by this hardware.
+
+properties:
+ compatible:
+ const: mediatek,mt8186-fhctl
+
+ reg:
+ maxItems: 2
+
+patternProperties:
+ "^map[0-9]$":
+ type: object
+ description:
+ Represents a group of PLLs controlled by the same domain and method.
+
+ properties:
+ domain:
+ description: The position of this hardware block in the chip.
+ $ref: /schemas/types.yaml#/definitions/string-array
+
+ method:
+ description: Determine which method to control this FHCTL hardware.
+ $ref: /schemas/types.yaml#/definitions/string-array
+
+ patternProperties:
+ "^armpll_(ll|bl)|(cci|main|mm|tvd|m|adsp|mfg|nna|nna2|msdc)pll$":
+ type: object
+ description:
+ A subnode represents one PLL clock. The properties it contains are
+ used to determine whether this PLL enable frequency hopping mechanism and spread spectrum clocking (SSC) control.
+
+ properties:
+ fh-id:
+ description: The index of the PLL clocks.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ perms:
+ description:
+ This is a bit field used to manage the permission of frequency
+ hopping function and spread spectrum clocking control.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ ssc-rate:
+ description: The percentage of the spectrum spreading.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 8
+
+ required:
+ - fh-id
+ - perms
+
+ required:
+ - domain
+ - method
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8186-clk.h>
+ fhctl: fhctl@1000ce00 {
+ compatible = "mediatek,mt8186-fhctl";
+ reg = <0x1000ce00 0x200>,
+ <0x1000c000 0xe00>;
+ map0 {
+ domain = "top";
+ method = "fhctl-ap";
+
+ armpll_ll {
+ fh-id = <0>;
+ perms = <0x10>;
+ };
+
+ armpll_bl {
+ fh-id = <1>;
+ perms = <0x10>;
+ };
+
+ ccipll {
+ fh-id = <2>;
+ perms = <0x10>;
+ };
+
+ mainpll {
+ fh-id = <3>;
+ perms = <0x1c>;
+ };
+
+ mmpll {
+ fh-id = <4>;
+ perms = <0x1c>;
+ };
+
+ tvdpll {
+ fh-id = <5>;
+ perms = <0x1c>;
+ };
+
+ mpll {
+ fh-id = <6>;
+ perms = <0x10>;
+ };
+
+ adsppll {
+ fh-id = <7>;
+ perms = <0x1c>;
+ };
+
+ mfgpll {
+ fh-id = <8>;
+ perms = <0x1c>;
+ };
+
+ nnapll {
+ fh-id = <9>;
+ perms = <0x1c>;
+ };
+
+ nna2pll {
+ fh-id = <10>;
+ perms = <0x1c>;
+ };
+
+ msdcpll {
+ fh-id = <11>;
+ perms = <0x1c>;
+ ssc-rate = <3>;
+ };
+ };
+ };
--
2.18.0
\
 
 \ /
  Last update: 2022-06-12 15:55    [W:1.976 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site