lkml.org 
[lkml]   [2022]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] can: Break loopback loop on loopback documentation
Date
There are two sections called "Local Loopback of Sent Frames".
One was meant to link to the other, but pointed at itself instead.

Signed-off-by: Max Staudt <max@enpas.org>
---
Documentation/networking/can.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/networking/can.rst b/Documentation/networking/can.rst
index f34cb0e4460e..ebc822e605f5 100644
--- a/Documentation/networking/can.rst
+++ b/Documentation/networking/can.rst
@@ -168,7 +168,7 @@ reflect the correct [#f1]_ traffic on the node the loopback of the sent
data has to be performed right after a successful transmission. If
the CAN network interface is not capable of performing the loopback for
some reason the SocketCAN core can do this task as a fallback solution.
-See :ref:`socketcan-local-loopback1` for details (recommended).
+See :ref:`socketcan-local-loopback2` for details (recommended).

The loopback functionality is enabled by default to reflect standard
networking behaviour for CAN applications. Due to some requests from
--
2.30.2
\
 
 \ /
  Last update: 2022-06-11 19:12    [W:0.042 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site