lkml.org 
[lkml]   [2022]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/9] power: reset: at91-reset: add support for sama7g5
Date
Hi,

The series adds reset controller support for SAMA7G5 SoCs. Compared with
previous version the reset controller embedded on SAMA7G5 is able to
reset individual on SoC devices (e.g. USB PHY controllers).

Among with this I took the change and converted reset controller
bindings to YAML (patch 2/9) and adapt reset controller nodes in
device tree files to comply with DT specifications (patch 1/9).

Thank you,
Claudiu Beznea

Changes in v5:
- in patch 6/9 added device_reset_min_id, device_reset_max_id to
struct at91_reset_data; these will be used in at91_reset_of_xlate()
(patch 7/9) allowing expansion of device reset code for future
devices; with this member of type const struct at91_reset_data *
has been added to struct at91_reset and at91_rcdev_init() gets
now only 2 arguments.
- in patch 8/9 use filled .device_reset_min_id, .device_reset_max_id
- in patch 6/9 use device_get_match_data()
- collected tags

Changes in v4:
- removed patch 10/10 from v3 as it has been taken though at91 tree

Changes in v3:
- use spin_lock_irqsave()/spin_unlock_irqrestore() and lock only
on update path
- collected tags

Changes in v2:
- added patches 5/10 and 10/10
- in patch 2/10 use my microchip email address
- in patch 4/10 added "SAMA7G5_" in front of macros to cope with file
naming and used (GPL-2.0-only OR BSD-2-Clause)
- in patch 6/10 documented the structure's members
- in patch 7/10:
- protect access to reset->dev_base with spin lock
- check for valid values of reset_spec->args[0] in
at91_reset_of_xlate()
- s/if (IS_ERR(reset->rstc_base))/if (IS_ERR(reset->dev_base))
- include dt-bindings/reset/sama7g5-reset.h
- document new added structure's members
- collected tags

Claudiu Beznea (9):
ARM: dts: at91: use generic name for reset controller
dt-bindings: reset: convert Atmel/Microchip reset controller to YAML
dt-bindings: reset: atmel,at91sam9260-reset: add sama7g5 bindings
dt-bindings: reset: add sama7g5 definitions
power: reset: at91-reset: document structures and enums
power: reset: at91-reset: add at91_reset_data
power: reset: at91-reset: add reset_controller_dev support
power: reset: at91-reset: add support for SAMA7G5
ARM: dts: at91: sama7g5: add reset-controller node

.../devicetree/bindings/arm/atmel-sysregs.txt | 15 --
.../reset/atmel,at91sam9260-reset.yaml | 68 +++++++
arch/arm/boot/dts/at91sam9260.dtsi | 2 +-
arch/arm/boot/dts/at91sam9261.dtsi | 2 +-
arch/arm/boot/dts/at91sam9263.dtsi | 2 +-
arch/arm/boot/dts/at91sam9g45.dtsi | 2 +-
arch/arm/boot/dts/at91sam9n12.dtsi | 2 +-
arch/arm/boot/dts/at91sam9rl.dtsi | 2 +-
arch/arm/boot/dts/at91sam9x5.dtsi | 2 +-
arch/arm/boot/dts/sam9x60.dtsi | 2 +-
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
arch/arm/boot/dts/sama5d3.dtsi | 2 +-
arch/arm/boot/dts/sama5d4.dtsi | 2 +-
arch/arm/boot/dts/sama7g5.dtsi | 7 +
drivers/power/reset/at91-reset.c | 184 ++++++++++++++++--
include/dt-bindings/reset/sama7g5-reset.h | 10 +
16 files changed, 265 insertions(+), 41 deletions(-)
create mode 100644 Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml
create mode 100644 include/dt-bindings/reset/sama7g5-reset.h

--
2.34.1

\
 
 \ /
  Last update: 2022-06-10 11:26    [W:0.126 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site