lkml.org 
[lkml]   [2022]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [RFC PATCH] ubd: add io_uring based userspace block driver
Date
Ming Lei <ming.lei@redhat.com> writes:

> This is the driver part of userspace block driver(ubd driver), the other
> part is userspace daemon part(ubdsrv)[1].
>
> The two parts communicate by io_uring's IORING_OP_URING_CMD with one
> shared cmd buffer for storing io command, and the buffer is read only for
> ubdsrv, each io command is indexed by io request tag directly, and
> is written by ubd driver.
>
> For example, when one READ io request is submitted to ubd block driver, ubd
> driver stores the io command into cmd buffer first, then completes one
> IORING_OP_URING_CMD for notifying ubdsrv, and the URING_CMD is issued to
> ubd driver beforehand by ubdsrv for getting notification of any new io request,
> and each URING_CMD is associated with one io request by tag.
>
> After ubdsrv gets the io command, it translates and handles the ubd io
> request, such as, for the ubd-loop target, ubdsrv translates the request
> into same request on another file or disk, like the kernel loop block
> driver. In ubdsrv's implementation, the io is still handled by io_uring,
> and share same ring with IORING_OP_URING_CMD command. When the target io
> request is done, the same IORING_OP_URING_CMD is issued to ubd driver for
> both committing io request result and getting future notification of new
> io request.
>
> Another thing done by ubd driver is to copy data between kernel io
> request and ubdsrv's io buffer:
>
> 1) before ubsrv handles WRITE request, copy the request's data into
> ubdsrv's userspace io buffer, so that ubdsrv can handle the write
> request
>
> 2) after ubsrv handles READ request, copy ubdsrv's userspace io buffer
> into this READ request, then ubd driver can complete the READ request
>
> Zero copy may be switched if mm is ready to support it.
>
> ubd driver doesn't handle any logic of the specific user space driver,
> so it should be small/simple enough.
>
> [1] ubdsrv
> https://github.com/ming1/ubdsrv/commits/devel
>
> Signed-off-by: Ming Lei <ming.lei@redhat.com>
> ---
> drivers/block/Kconfig | 7 +
> drivers/block/Makefile | 2 +
> drivers/block/ubd_drv.c | 1193 ++++++++++++++++++++++++++++++++++
> include/uapi/linux/ubd_cmd.h | 167 +++++
> 4 files changed, 1369 insertions(+)
> create mode 100644 drivers/block/ubd_drv.c
> create mode 100644 include/uapi/linux/ubd_cmd.h
>
> diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
> index fdb81f2794cd..3893ccd82e8a 100644
> --- a/drivers/block/Kconfig
> +++ b/drivers/block/Kconfig
> @@ -408,6 +408,13 @@ config BLK_DEV_RBD
>
> If unsure, say N.
>
> +config BLK_DEV_USER_BLK_DRV
> + bool "Userspace block driver"
> + select IO_URING
> + default y
> + help
> + io uring based userspace block driver.
> +
> source "drivers/block/rnbd/Kconfig"
>
> endif # BLK_DEV
> diff --git a/drivers/block/Makefile b/drivers/block/Makefile
> index 934a9c7c3a7c..effff34babd9 100644
> --- a/drivers/block/Makefile
> +++ b/drivers/block/Makefile
> @@ -39,4 +39,6 @@ obj-$(CONFIG_BLK_DEV_RNBD) += rnbd/
>
> obj-$(CONFIG_BLK_DEV_NULL_BLK) += null_blk/
>
> +obj-$(CONFIG_BLK_DEV_USER_BLK_DRV) += ubd_drv.o
> +
> swim_mod-y := swim.o swim_asm.o
> diff --git a/drivers/block/ubd_drv.c b/drivers/block/ubd_drv.c
> new file mode 100644
> index 000000000000..9eba7ee17aff
> --- /dev/null
> +++ b/drivers/block/ubd_drv.c

Hi Ming,

Thank you very much for sending it.

Given the interest in working on it from a bunch of people, I'd
appreciate if we consider putting the code into drivers/staging as soon
as possible, and let us work on the same code base to consolidate the
protocol there, instead of taking too long to push to drivers/block.

One initial concern is that UBD is already the name for storage device
exposed by User Mode Linux. A rename would avoid future confusion.

> @@ -0,0 +1,1193 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Userspace block device - block device which IO is handled from userspace
> + *
> + * Take full use of io_uring passthrough command for communicating with
> + * ubd userspace daemon(ubdsrvd) for handling basic IO request.
> + *
> + * Copyright 2022 Ming Lei <ming.lei@redhat.com>
> + *
> + * (part of code stolen from loop.c)
> + */
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/sched.h>
> +#include <linux/fs.h>
> +#include <linux/pagemap.h>
> +#include <linux/file.h>
> +#include <linux/stat.h>
> +#include <linux/errno.h>
> +#include <linux/major.h>
> +#include <linux/wait.h>
> +#include <linux/blkdev.h>
> +#include <linux/init.h>
> +#include <linux/swap.h>
> +#include <linux/slab.h>
> +#include <linux/compat.h>
> +#include <linux/mutex.h>
> +#include <linux/writeback.h>
> +#include <linux/completion.h>
> +#include <linux/highmem.h>
> +#include <linux/sysfs.h>
> +#include <linux/miscdevice.h>
> +#include <linux/falloc.h>
> +#include <linux/uio.h>
> +#include <linux/ioprio.h>
> +#include <linux/sched/mm.h>
> +#include <linux/uaccess.h>
> +#include <linux/cdev.h>
> +#include <linux/io_uring.h>
> +#include <linux/blk-mq.h>
> +#include <linux/delay.h>
> +#include <linux/mm.h>
> +#include <asm/page.h>
> +#include <linux/task_work.h>
> +#include <uapi/linux/ubd_cmd.h>
> +
> +#define UBD_MINORS (1U << MINORBITS)
> +
> +struct ubd_abort_work {
> + struct ubd_device *ub;
> + unsigned int q_id;
> + struct work_struct work;
> +};
> +
> +struct ubd_rq_data {
> + struct callback_head work;
> +};
> +
> +/* io cmd is active: sqe cmd is received, and its cqe isn't done */
> +#define UBD_IO_FLAG_ACTIVE 0x01
> +
> +/*
> + * FETCH io cmd is completed via cqe, and the io cmd is being handled by
> + * ubdsrv, and not committed yet
> + */
> +#define UBD_IO_FLAG_OWNED_BY_SRV 0x02
> +
> +struct ubd_io {
> + /* userspace buffer address from io cmd */
> + __u64 addr;
> + unsigned int flags;
> + unsigned int res;
> +
> + struct io_uring_cmd *cmd;
> +};
> +
> +struct ubd_queue {
> + int q_id;
> + int q_depth;
> +
> + struct task_struct *ubq_daemon;
> + char *io_cmd_buf;
> +
> + unsigned long io_addr; /* mapped vm address */
> + unsigned int max_io_sz;
> + bool aborted;
> + struct ubd_io ios[0];
> +};
> +
> +struct ubd_device {
> + struct gendisk *ub_disk;
> + struct request_queue *ub_queue;
> +
> + char *__queues;
> +
> + unsigned short queue_size;
> + unsigned short bs_shift;
> + unsigned int nr_aborted_queues;
> + struct ubdsrv_ctrl_dev_info dev_info;
> +
> + struct blk_mq_tag_set tag_set;
> +
> + struct cdev cdev;
> + struct device cdev_dev;
> +
> + atomic_t ch_open_cnt;
> + int ub_number;
> +
> + struct mutex mutex;
> +};
> +
> +static dev_t ubd_chr_devt;
> +static struct class *ubd_chr_class;
> +
> +static DEFINE_IDR(ubd_index_idr);
> +static DEFINE_MUTEX(ubd_ctl_mutex);
> +
> +static struct miscdevice ubd_misc;
> +
> +static inline struct ubd_queue *ubd_get_queue(struct ubd_device *dev, int qid)
> +{
> + return (struct ubd_queue *)&(dev->__queues[qid * dev->queue_size]);
> +}
> +
> +static inline bool ubd_rq_need_copy(struct request *rq)
> +{
> + return rq->bio && bio_has_data(rq->bio);
> +}
> +
> +static inline struct ubdsrv_io_desc *ubd_get_iod(struct ubd_queue *ubq, int tag)
> +{
> + return (struct ubdsrv_io_desc *)
> + &(ubq->io_cmd_buf[tag * sizeof(struct ubdsrv_io_desc)]);
> +}
> +
> +static inline char *ubd_queue_cmd_buf(struct ubd_device *ub, int q_id)
> +{
> + return ubd_get_queue(ub, q_id)->io_cmd_buf;
> +}
> +
> +static inline int ubd_queue_cmd_buf_size(struct ubd_device *ub, int q_id)
> +{
> + struct ubd_queue *ubq = ubd_get_queue(ub, q_id);
> +
> + return round_up(ubq->q_depth * sizeof(struct ubdsrv_io_desc), PAGE_SIZE);
> +}
> +
> +static int ubd_open(struct block_device *bdev, fmode_t mode)
> +{
> + return 0;
> +}
> +
> +static void ubd_release(struct gendisk *disk, fmode_t mode)
> +{
> +}
> +
> +static const struct block_device_operations ub_fops = {
> + .owner = THIS_MODULE,
> + .open = ubd_open,
> + .release = ubd_release,
> +};
> +
> +#define UBD_MAX_PIN_PAGES 32
> +
> +static void ubd_release_pages(struct ubd_device *ub, struct page **pages,
> + int nr_pages)
> +{
> + int i;
> +
> + for (i = 0; i < nr_pages; i++)
> + put_page(pages[i]);
> +}
> +
> +static int ubd_pin_user_pages(struct ubd_device *ub, u64 start_vm,
> + struct page **pages, unsigned int nr_pages, bool to_rq)
> +{
> + unsigned int gup_flags = to_rq ? 0 : FOLL_WRITE;
> +
> + return get_user_pages_fast(start_vm, nr_pages, gup_flags, pages);
> +}
> +
> +static inline unsigned ubd_copy_bv(struct bio_vec *bv, void **bv_addr,
> + void *pg_addr, unsigned int *pg_off,
> + unsigned int *pg_len, bool to_bv)
> +{
> + unsigned len = min_t(unsigned, bv->bv_len, *pg_len);
> +
> + if (*bv_addr == NULL)
> + *bv_addr = kmap_local_page(bv->bv_page);
> +
> + if (to_bv)
> + memcpy(*bv_addr + bv->bv_offset, pg_addr + *pg_off, len);
> + else
> + memcpy(pg_addr + *pg_off, *bv_addr + bv->bv_offset, len);
> +
> + bv->bv_offset += len;
> + bv->bv_len -= len;
> + *pg_off += len;
> + *pg_len -= len;
> +
> + if (!bv->bv_len) {
> + kunmap_local(*bv_addr);
> + *bv_addr = NULL;
> + }
> +
> + return len;
> +}
> +
> +/* copy rq pages to ubdsrv vm address pointed by io->addr */
> +static int ubd_copy_pages(struct ubd_device *ub, struct request *rq)
> +{
> + struct ubd_queue *ubq = rq->mq_hctx->driver_data;
> + struct ubd_io *io = &ubq->ios[rq->tag];
> + struct page *pgs[UBD_MAX_PIN_PAGES];
> + const bool to_rq = !op_is_write(rq->cmd_flags);
> + struct req_iterator req_iter;
> + struct bio_vec bv;
> + unsigned long start = io->addr, left = rq->__data_len;
> + unsigned int idx = 0, pg_len = 0, pg_off = 0;
> + int nr_pin = 0;
> + void *pg_addr = NULL;
> + struct page *curr = NULL;
> +
> + rq_for_each_segment(bv, rq, req_iter) {
> + unsigned len, bv_off = bv.bv_offset, bv_len = bv.bv_len;
> + void *bv_addr = NULL;
> +
> +refill:
> + if (pg_len == 0) {
> + unsigned int off = 0;
> +
> + if (pg_addr) {
> + kunmap_local(pg_addr);
> + if (!to_rq)
> + set_page_dirty_lock(curr);
> + pg_addr = NULL;
> + }
> +
> + /* refill pages */
> + if (idx >= nr_pin) {
> + unsigned int max_pages;
> +
> + ubd_release_pages(ub, pgs, nr_pin);
> +
> + off = start & (PAGE_SIZE - 1);
> + max_pages = round_up(off + left, PAGE_SIZE);
> + nr_pin = min_t(unsigned, UBD_MAX_PIN_PAGES, max_pages);
> + nr_pin = ubd_pin_user_pages(ub, start, pgs,
> + nr_pin, to_rq);
> + if (nr_pin <= 0)
> + return -EINVAL;
> + idx = 0;
> + }
> + pg_off = off;
> + pg_len = min(PAGE_SIZE - off, left);
> + off = 0;
> + curr = pgs[idx++];
> + pg_addr = kmap_local_page(curr);
> + }
> +
> + len = ubd_copy_bv(&bv, &bv_addr, pg_addr, &pg_off, &pg_len,
> + to_rq);
> + /* either one of the two has been consumed */
> + WARN_ON_ONCE(bv.bv_len && pg_len);
> + start += len;
> + left -= len;
> +
> + /* overflow */
> + WARN_ON_ONCE(left > rq->__data_len);
> + WARN_ON_ONCE(bv.bv_len > bv_len);
> + if (bv.bv_len)
> + goto refill;
> +
> + bv.bv_len = bv_len;
> + bv.bv_offset = bv_off;
> + }
> + if (pg_addr) {
> + kunmap_local(pg_addr);
> + if (!to_rq)
> + set_page_dirty_lock(curr);
> + }
> + ubd_release_pages(ub, pgs, nr_pin);
> +
> + WARN_ON_ONCE(left != 0);
> +
> + return 0;
> +}
> +
> +#define UBD_REMAP_BATCH 32
> +
> +static int ubd_map_io(struct ubd_device *ub, struct request *req)
> +{
> + /*
> + * no zero copy, we delay copy WRITE request data into ubdsrv
> + * context via task_work_add and the big benefit is that pinning
> + * pages in current context is pretty fast, see ubd_pin_user_pages
> + */
> + if (!op_is_write(req->cmd_flags) || !ubd_rq_need_copy(req))
> + return 0;
> +
> + /* convert to data copy in current context */
> + return ubd_copy_pages(ub, req);
> +}
> +
> +static int ubd_unmap_io(struct request *req)
> +{
> + struct ubd_device *ub = req->q->queuedata;
> +
> + if (!op_is_write(req->cmd_flags) && ubd_rq_need_copy(req))
> + return ubd_copy_pages(ub, req);
> + return 0;
> +}
> +
> +static inline unsigned int ubd_req_build_flags(struct request *req)
> +{
> + unsigned flags = 0;
> +
> + if (req->cmd_flags & REQ_FAILFAST_DEV)
> + flags |= UBD_IO_F_FAILFAST_DEV;
> +
> + if (req->cmd_flags & REQ_FAILFAST_TRANSPORT)
> + flags |= UBD_IO_F_FAILFAST_TRANSPORT;
> +
> + if (req->cmd_flags & REQ_FAILFAST_DRIVER)
> + flags |= UBD_IO_F_FAILFAST_DRIVER;
> +
> + if (req->cmd_flags & REQ_META)
> + flags |= UBD_IO_F_META;
> +
> + if (req->cmd_flags & REQ_INTEGRITY)
> + flags |= UBD_IO_F_INTEGRITY;
> +
> + if (req->cmd_flags & REQ_FUA)
> + flags |= UBD_IO_F_FUA;
> +
> + if (req->cmd_flags & REQ_PREFLUSH)
> + flags |= UBD_IO_F_PREFLUSH;
> +
> + if (req->cmd_flags & REQ_NOUNMAP)
> + flags |= UBD_IO_F_NOUNMAP;
> +
> + if (req->cmd_flags & REQ_SWAP)
> + flags |= UBD_IO_F_SWAP;
> +
> + return flags;
> +}
> +
> +static int ubd_setup_iod(struct ubd_queue *ubq, struct request *req)
> +{
> + struct ubdsrv_io_desc *iod = ubd_get_iod(ubq, req->tag);
> + struct ubd_io *io = &ubq->ios[req->tag];
> + u32 ubd_op;
> +
> + switch (req_op(req)) {
> + case REQ_OP_READ:
> + ubd_op = UBD_IO_OP_READ;
> + break;
> + case REQ_OP_WRITE:
> + ubd_op = UBD_IO_OP_WRITE;
> + break;
> + case REQ_OP_FLUSH:
> + ubd_op = UBD_IO_OP_FLUSH;
> + break;
> + case REQ_OP_DISCARD:
> + ubd_op = UBD_IO_OP_DISCARD;
> + break;
> + case REQ_OP_WRITE_ZEROES:
> + ubd_op = UBD_IO_OP_WRITE_ZEROES;
> + break;
> + default:
> + return BLK_STS_IOERR;
> + }
> +
> + /* need to translate since kernel may change */
> + iod->op_flags = ubd_op | ubd_req_build_flags(req);
> + iod->tag_blocks = req->tag | (blk_rq_sectors(req) << 12);
> + iod->start_block = blk_rq_pos(req);
> + iod->addr = io->addr;
> +
> + return BLK_STS_OK;
> +}
> +
> +static blk_status_t ubd_queue_rq(struct blk_mq_hw_ctx *hctx,
> + const struct blk_mq_queue_data *bd)
> +{
> + struct ubd_queue *ubq = hctx->driver_data;
> + struct request *rq = bd->rq;
> + struct ubd_io *io = &ubq->ios[rq->tag];
> + struct ubd_rq_data *data = blk_mq_rq_to_pdu(rq);
> + blk_status_t res;
> +
> + if (ubq->aborted)
> + return BLK_STS_IOERR;
> +
> + /* this io cmd slot isn't active, so have to fail this io */
> + if (WARN_ON_ONCE(!(io->flags & UBD_IO_FLAG_ACTIVE)))
> + return BLK_STS_IOERR;
> +
> + /* fill iod to slot in io cmd buffer */
> + res = ubd_setup_iod(ubq, rq);
> + if (res != BLK_STS_OK)
> + return BLK_STS_IOERR;
> +
> + blk_mq_start_request(bd->rq);
> +
> + /* mark this cmd owned by ubdsrv */
> + io->flags |= UBD_IO_FLAG_OWNED_BY_SRV;
> +
> + /*
> + * clear ACTIVE since we are done with this sqe/cmd slot
> + *
> + * We can only accept io cmd in case of being not active.
> + */
> + io->flags &= ~UBD_IO_FLAG_ACTIVE;
> +
> + /*
> + * run data copy in task work context for WRITE, and complete io_uring
> + * cmd there too.
> + *
> + * This way should improve batching, meantime pinning pages in current
> + * context is pretty fast.
> + */
> + task_work_add(ubq->ubq_daemon, &data->work, TWA_SIGNAL);
> +
> + return BLK_STS_OK;
> +}
> +
> +static void ubd_complete_rq(struct request *req)
> +{
> + struct ubd_queue *ubq = req->mq_hctx->driver_data;
> + struct ubd_io *io = &ubq->ios[req->tag];
> +
> + /* for READ request, writing data in iod->addr to rq buffers */
> + ubd_unmap_io(req);
> +
> + blk_mq_end_request(req, io->res);
> +}
> +
> +static void ubd_rq_task_work_fn(struct callback_head *work)
> +{
> + struct ubd_rq_data *data = container_of(work,
> + struct ubd_rq_data, work);
> + struct request *req = blk_mq_rq_from_pdu(data);
> + struct ubd_queue *ubq = req->mq_hctx->driver_data;
> + struct ubd_io *io = &ubq->ios[req->tag];
> + struct ubd_device *ub = req->q->queuedata;
> + int ret = UBD_IO_RES_OK;
> +
> + if (ubd_map_io(ub, req))
> + ret = UBD_IO_RES_DATA_BAD;
> +
> + pr_devel("%s: complete: cmd op %d, tag %d ret %x io_flags %x, addr %llx\n",
> + __func__, io->cmd->cmd_op, req->tag, ret, io->flags,
> + ubd_get_iod(ubq, req->tag)->addr);
> + /* tell ubdsrv one io request is coming */
> + io_uring_cmd_done(io->cmd, ret, 0);
> +}
> +
> +static int ubd_init_hctx(struct blk_mq_hw_ctx *hctx, void *driver_data,
> + unsigned int hctx_idx)
> +{
> + struct ubd_device *ub = hctx->queue->queuedata;
> + struct ubd_queue *ubq = ubd_get_queue(ub, hctx->queue_num);
> +
> + hctx->driver_data = ubq;
> + return 0;
> +}
> +
> +static int ubd_init_rq(struct blk_mq_tag_set *set, struct request *req,
> + unsigned int hctx_idx, unsigned int numa_node)
> +{
> + struct ubd_rq_data *data = blk_mq_rq_to_pdu(req);
> +
> + init_task_work(&data->work, ubd_rq_task_work_fn);
> +
> + return 0;
> +}
> +
> +static const struct blk_mq_ops ubd_mq_ops = {
> + .queue_rq = ubd_queue_rq,
> + .init_hctx = ubd_init_hctx,
> + .init_request = ubd_init_rq,
> +};
> +
> +static int ubd_ch_open(struct inode *inode, struct file *filp)
> +{
> + struct ubd_device *ub = container_of(inode->i_cdev,
> + struct ubd_device, cdev);
> +
> + if (atomic_cmpxchg(&ub->ch_open_cnt, 0, 1) == 0) {
> + filp->private_data = ub;
> + return 0;
> + }
> + return -EBUSY;
> +}
> +
> +static int ubd_ch_release(struct inode *inode, struct file *filp)
> +{
> + struct ubd_device *ub = filp->private_data;
> +
> + while (atomic_cmpxchg(&ub->ch_open_cnt, 1, 0) != 1)
> + cpu_relax();
> +
> + filp->private_data = NULL;
> + return 0;
> +}
> +
> +/* map pre-allocated per-queue cmd buffer to ubdsrv daemon */
> +static int ubd_ch_mmap(struct file *filp, struct vm_area_struct *vma)
> +{
> + struct ubd_device *ub = filp->private_data;
> + size_t sz = vma->vm_end - vma->vm_start;
> + unsigned max_sz = UBD_MAX_QUEUE_DEPTH * sizeof(struct ubdsrv_io_desc);
> + unsigned long pfn, end;
> + int q_id;
> +
> + end = UBDSRV_CMD_BUF_OFFSET + ub->dev_info.nr_hw_queues * max_sz;
> + if (vma->vm_pgoff < UBDSRV_CMD_BUF_OFFSET || vma->vm_pgoff >= end)
> + return -EINVAL;
> +
> + q_id = (vma->vm_pgoff - UBDSRV_CMD_BUF_OFFSET) / max_sz;
> +
> + if (sz != ubd_queue_cmd_buf_size(ub, q_id))
> + return -EINVAL;
> +
> + pfn = virt_to_phys(ubd_queue_cmd_buf(ub, q_id)) >> PAGE_SHIFT;
> + return remap_pfn_range(vma, vma->vm_start, pfn, sz, vma->vm_page_prot);
> +}
> +
> +static void ubd_commit_completion(struct ubd_device *ub,
> + struct ubdsrv_io_cmd *ub_cmd)
> +{
> + u32 qid = ub_cmd->q_id, tag = ub_cmd->tag;
> + struct ubd_queue *ubq = ubd_get_queue(ub, qid);
> + struct ubd_io *io = &ubq->ios[tag];
> + struct request *req;
> +
> + /* now this cmd slot is owned by nbd driver */
> + io->flags &= ~UBD_IO_FLAG_OWNED_BY_SRV;
> + io->res = ub_cmd->result;
> +
> + /* find the io request and complete */
> + req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], ub_cmd->tag);
> +
> + if (req && likely(!blk_should_fake_timeout(req->q)))
> + ubd_complete_rq(req);
> +}
> +
> +/* has to be called disk is dead or frozen */
> +static int ubd_abort_queue(struct ubd_device *ub, int qid)
> +{
> + int ret = UBD_IO_RES_ABORT;
> + struct ubd_queue *q = ubd_get_queue(ub, qid);
> + int i;
> +
> + for (i = 0; i < q->q_depth; i++) {
> + struct ubd_io *io = &q->ios[i];
> +
> + if (io->flags & UBD_IO_FLAG_ACTIVE) {
> + io->flags &= ~UBD_IO_FLAG_ACTIVE;
> + io_uring_cmd_done(io->cmd, ret, 0);
> + }
> + }
> + q->ubq_daemon = NULL;
> + return 0;
> +}
> +
> +static void ubd_abort_work_fn(struct work_struct *work)
> +{
> + struct ubd_abort_work *abort_work =
> + container_of(work, struct ubd_abort_work, work);
> + struct ubd_device *ub = abort_work->ub;
> + struct ubd_queue *ubq = ubd_get_queue(ub, abort_work->q_id);
> +
> + blk_mq_freeze_queue(ub->ub_queue);
> + mutex_lock(&ub->mutex);
> + if (!ubq->aborted) {
> + ubq->aborted = true;
> + ubd_abort_queue(ub, abort_work->q_id);
> + ub->nr_aborted_queues++;
> + }
> + mutex_unlock(&ub->mutex);
> + blk_mq_unfreeze_queue(ub->ub_queue);
> +
> + mutex_lock(&ub->mutex);
> + if (ub->nr_aborted_queues == ub->dev_info.nr_hw_queues) {
> + if (disk_live(ub->ub_disk))
> + del_gendisk(ub->ub_disk);
> + }
> + mutex_unlock(&ub->mutex);
> +
> + kfree(abort_work);
> +}
> +
> +static int ubd_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
> +{
> + struct ubdsrv_io_cmd *ub_cmd = (struct ubdsrv_io_cmd *)cmd->cmd;
> + struct ubd_device *ub = cmd->file->private_data;
> + struct ubd_queue *ubq;
> + struct ubd_io *io;
> + u32 cmd_op = cmd->cmd_op;
> + unsigned tag = ub_cmd->tag;
> + int ret = UBD_IO_RES_INVALID_SQE;
> +
> + pr_devel("%s: receieved: cmd op %d, tag %d, queue %d\n",
> + __func__, cmd->cmd_op, tag, ub_cmd->q_id);
> +
> + if (!(issue_flags & IO_URING_F_SQE128))
> + goto out;
> +
> + if (cmd_op == UBD_IO_ABORT_QUEUE) {
> + struct ubd_abort_work *work = kzalloc(sizeof(*work),
> + GFP_KERNEL);
> + if (!work)
> + goto out;
> +
> + INIT_WORK(&work->work, ubd_abort_work_fn);
> + work->ub = ub;
> + work->q_id = ub_cmd->q_id;
> +
> + schedule_work(&work->work);
> + ret = UBD_IO_RES_OK;
> + goto out_done;
> + }
> +
> + ubq = ubd_get_queue(ub, ub_cmd->q_id);
> + if (WARN_ON_ONCE(tag >= ubq->q_depth))
> + goto out;
> +
> + io = &ubq->ios[tag];
> +
> + /* there is pending io cmd, something must be wrong */
> + if (io->flags & UBD_IO_FLAG_ACTIVE) {
> + ret = UBD_IO_RES_BUSY;
> + goto out;
> + }
> +
> + switch (cmd_op) {
> + case UBD_IO_FETCH_REQ:
> + /* FETCH_REQ is only issued when starting device */
> + mutex_lock(&ub->mutex);
> + if (!ubq->ubq_daemon)
> + ubq->ubq_daemon = current;

I find it slightly weird to set ubq_daemon per-request. It would cause
weird corruptions if a buggy thread sends a FETCH_REQ to the wrong q_id
after another request in-flight has already set ubq_daemon. I was also
working on MQ and I was thinking of dropping the q_id field from the
io_uring command, implying it from the fd that was opened. Then, I let
each thread reopen the char device to configure a new queue:

fd = open("/dev/ubdc0", O_RDWR); // Connects to a new queue

fd is closed with fork/exec.

> +static int ubd_ctrl_start_dev(struct ubd_device *ub, struct io_uring_cmd *cmd)
> +{
> + struct ubdsrv_ctrl_dev_info *info = (struct ubdsrv_ctrl_dev_info *)cmd->cmd;
> + int ret = -EINVAL;
> + unsigned long end = jiffies + 3 * HZ;
> +
> + if (info->ubdsrv_pid <= 0)
> + return -1;
> +
> + mutex_lock(&ub->mutex);
> +
> + ub->dev_info.ubdsrv_pid = info->ubdsrv_pid;
> + if (disk_live(ub->ub_disk))
> + goto unlock;
> + while (time_before(jiffies, end)) {
> + if (ubd_io_ready(ub)) {
> + ret = 0;
> + break;
> + }
> + msleep(100);
> + }

This timer is quite weird, in my opinion. Shouldn't we fail start_dev
and let userspace retry the command at a later time?

> + unlock:
> + mutex_unlock(&ub->mutex);
> + pr_devel("%s: device io ready %d\n", __func__, !ret);
> +
> + if (ret == 0)
> + ret = add_disk(ub->ub_disk);
> +
> + return ret;
> +}
> +
> +static inline void ubd_dump(struct io_uring_cmd *cmd)
> +{
> +#ifdef DEBUG
> + struct ubdsrv_ctrl_dev_info *info =
> + (struct ubdsrv_ctrl_dev_info *)cmd->cmd;
> +
> + printk("%s: cmd_op %x, dev id %d flags %llx\n", __func__,
> + cmd->cmd_op, info->dev_id, info->flags);
> +
> + printk("\t nr_hw_queues %d queue_depth %d block size %d dev_capacity %lld\n",
> + info->nr_hw_queues, info->queue_depth,
> + info->block_size, info->dev_blocks);
> +#endif
> +}

Maybe pr_debug or tracepoint?

> +MODULE_AUTHOR("Ming Lei <ming.lei@redhat.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/include/uapi/linux/ubd_cmd.h b/include/uapi/linux/ubd_cmd.h
> new file mode 100644
> index 000000000000..8ecea6aa9cfe
> --- /dev/null
> +++ b/include/uapi/linux/ubd_cmd.h
> @@ -0,0 +1,167 @@
> +#ifndef USER_BLK_DRV_CMD_INC_H
> +#define USER_BLK_DRV_CMD_INC_H
> +
> +/* ubd server command definition */
> +
> +/* CMD result code */
> +#define UBD_CTRL_CMD_RES_OK 0
> +#define UBD_CTRL_CMD_RES_FAILED -1
> +
> +/*
> + * Admin commands, issued by ubd server, and handled by ubd driver.
> + */
> +#define UBD_CMD_SET_DEV_INFO 0x01
> +#define UBD_CMD_GET_DEV_INFO 0x02
> +#define UBD_CMD_ADD_DEV 0x04
> +#define UBD_CMD_DEL_DEV 0x05
> +#define UBD_CMD_START_DEV 0x06
> +#define UBD_CMD_STOP_DEV 0x07
> +
> +/*
> + * IO commands, issued by ubd server, and handled by ubd driver.
> + *
> + * FETCH_REQ: issued via sqe(URING_CMD) beforehand for fetching IO request
> + * from ubd driver, should be issued only when starting device. After
> + * the associated cqe is returned, request's tag can be retrieved via
> + * cqe->userdata.
> + *
> + * COMMIT_AND_FETCH_REQ: issued via sqe(URING_CMD) after ubdserver handled
> + * this IO request, request's handling result is committed to ubd
> + * driver, meantime FETCH_REQ is piggyback, and FETCH_REQ has to be
> + * handled before completing io request.
> + *
> + * COMMIT_REQ: issued via sqe(URING_CMD) after ubdserver handled this IO
> + * request, request's handling result is committed to ubd driver.
> + *
> + * ABORT_QUEUE: issued via sqe(URING_CMD) and abort all active commands,
> + * meantime ubdserver can't issue any FETCH_REQ commands
> + */
> +#define UBD_IO_FETCH_REQ 0x20
> +#define UBD_IO_COMMIT_AND_FETCH_REQ 0x21
> +#define UBD_IO_COMMIT_REQ 0x22
> +#define UBD_IO_ABORT_QUEUE 0x23
> +
> +#define UBD_IO_RES_OK 0x01
> +#define UBD_IO_RES_INVALID_SQE 0x5f
> +#define UBD_IO_RES_INVALID_TAG 0x5e
> +#define UBD_IO_RES_INVALID_QUEUE 0x5d
> +#define UBD_IO_RES_BUSY 0x5c
> +#define UBD_IO_RES_DUP_FETCH 0x5b
> +#define UBD_IO_RES_UNEXPECTED_CMD 0x5a
> +#define UBD_IO_RES_DATA_BAD 0x59
> +
> +/* only ABORT means that no re-fetch */
> +#define UBD_IO_RES_ABORT 0x59
> +
> +#define UBDSRV_CMD_BUF_OFFSET 0
> +#define UBDSRV_IO_BUF_OFFSET 0x80000000
> +
> +/* tag bit is 12bit, so at most 4096 IOs for each queue */
> +#define UBD_MAX_QUEUE_DEPTH 4096
> +
> +/*
> + * zero copy requires 4k block size, and can remap ubd driver's io
> + * request into ubdsrv's vm space
> + */
> +#define UBD_F_SUPPORT_ZERO_COPY 0
> +
> +struct ubdsrv_ctrl_dev_info {
> + __u16 nr_hw_queues;
> + __u16 queue_depth;
> + __u16 block_size;
> + __u16 state;
> +
> + __u32 rq_max_blocks;
> + __u32 dev_id;
> +
> + __u64 dev_blocks;
> + __u64 flags;
> +
> + /*
> + * Only valid for READ kind of ctrl command, and driver can
> + * get the userspace buffer address here, then write data
> + * into this buffer.
> + *
> + * And the buffer has to be inside one single page.
> + */
> + __u64 addr;
> + __u32 len;
> + __s32 ubdsrv_pid;
> + __u64 reserved0[2];
> +};
I was about to send you a patch to simplify the interface for
different commands. My plan was to avoid passing parts of the structure for
commands that don't use it, considering the limit of io_uring cmd length.
struct ubdsrv_ctrl_dev_info {
__u32 dev_id;
union {
char raw[28]; /* Maximum size for iouring_command */
struct {
__u32 rq_max_blocks;
__s32 ubdsrv_pid;
__u16 nr_hw_queues;
__u16 queue_depth;
__u16 block_size;
__u16 state;

__u64 dev_blocks;
__u64 flags;
}, /* UBD_CMD_ADD_DEV */
struct {
__u64 addr;
__u32 len;
} /* CMD_GET_DEV_INFO */
}
};
What do you think?

in addition, I think UBD_CMD_ADD_DEV should embed an extra protocol
version field, for future extension.

--
Gabriel Krisman Bertazi

\
 
 \ /
  Last update: 2022-05-09 17:12    [W:0.176 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site