lkml.org 
[lkml]   [2022]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] ubd: add io_uring based userspace block driver
On Mon, May 09, 2022 at 11:10:03AM -0400, Gabriel Krisman Bertazi wrote:
> Ming Lei <ming.lei@redhat.com> writes:
>
> > This is the driver part of userspace block driver(ubd driver), the other
> > part is userspace daemon part(ubdsrv)[1].
> >
> > The two parts communicate by io_uring's IORING_OP_URING_CMD with one
> > shared cmd buffer for storing io command, and the buffer is read only for
> > ubdsrv, each io command is indexed by io request tag directly, and
> > is written by ubd driver.
> >
> > For example, when one READ io request is submitted to ubd block driver, ubd
> > driver stores the io command into cmd buffer first, then completes one
> > IORING_OP_URING_CMD for notifying ubdsrv, and the URING_CMD is issued to
> > ubd driver beforehand by ubdsrv for getting notification of any new io request,
> > and each URING_CMD is associated with one io request by tag.
> >
> > After ubdsrv gets the io command, it translates and handles the ubd io
> > request, such as, for the ubd-loop target, ubdsrv translates the request
> > into same request on another file or disk, like the kernel loop block
> > driver. In ubdsrv's implementation, the io is still handled by io_uring,
> > and share same ring with IORING_OP_URING_CMD command. When the target io
> > request is done, the same IORING_OP_URING_CMD is issued to ubd driver for
> > both committing io request result and getting future notification of new
> > io request.
> >
> > Another thing done by ubd driver is to copy data between kernel io
> > request and ubdsrv's io buffer:
> >
> > 1) before ubsrv handles WRITE request, copy the request's data into
> > ubdsrv's userspace io buffer, so that ubdsrv can handle the write
> > request
> >
> > 2) after ubsrv handles READ request, copy ubdsrv's userspace io buffer
> > into this READ request, then ubd driver can complete the READ request
> >
> > Zero copy may be switched if mm is ready to support it.
> >
> > ubd driver doesn't handle any logic of the specific user space driver,
> > so it should be small/simple enough.
> >
> > [1] ubdsrv
> > https://github.com/ming1/ubdsrv/commits/devel
> >
> > Signed-off-by: Ming Lei <ming.lei@redhat.com>
> > ---
> > drivers/block/Kconfig | 7 +
> > drivers/block/Makefile | 2 +
> > drivers/block/ubd_drv.c | 1193 ++++++++++++++++++++++++++++++++++
> > include/uapi/linux/ubd_cmd.h | 167 +++++
> > 4 files changed, 1369 insertions(+)
> > create mode 100644 drivers/block/ubd_drv.c
> > create mode 100644 include/uapi/linux/ubd_cmd.h
> >
> > diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
> > index fdb81f2794cd..3893ccd82e8a 100644
> > --- a/drivers/block/Kconfig
> > +++ b/drivers/block/Kconfig
> > @@ -408,6 +408,13 @@ config BLK_DEV_RBD
> >
> > If unsure, say N.
> >
> > +config BLK_DEV_USER_BLK_DRV
> > + bool "Userspace block driver"
> > + select IO_URING
> > + default y
> > + help
> > + io uring based userspace block driver.
> > +
> > source "drivers/block/rnbd/Kconfig"
> >
> > endif # BLK_DEV
> > diff --git a/drivers/block/Makefile b/drivers/block/Makefile
> > index 934a9c7c3a7c..effff34babd9 100644
> > --- a/drivers/block/Makefile
> > +++ b/drivers/block/Makefile
> > @@ -39,4 +39,6 @@ obj-$(CONFIG_BLK_DEV_RNBD) += rnbd/
> >
> > obj-$(CONFIG_BLK_DEV_NULL_BLK) += null_blk/
> >
> > +obj-$(CONFIG_BLK_DEV_USER_BLK_DRV) += ubd_drv.o
> > +
> > swim_mod-y := swim.o swim_asm.o
> > diff --git a/drivers/block/ubd_drv.c b/drivers/block/ubd_drv.c
> > new file mode 100644
> > index 000000000000..9eba7ee17aff
> > --- /dev/null
> > +++ b/drivers/block/ubd_drv.c
>
> Hi Ming,
>
> Thank you very much for sending it.
>
> Given the interest in working on it from a bunch of people, I'd
> appreciate if we consider putting the code into drivers/staging as soon
> as possible, and let us work on the same code base to consolidate the
> protocol there, instead of taking too long to push to drivers/block.
>
> One initial concern is that UBD is already the name for storage device
> exposed by User Mode Linux. A rename would avoid future confusion.

I saw that, do you have any suggested name?

Also, another 'UBD' driver(arch/um/drivers/ubd_kern.c) is only for UML
arch, so the two should be in two worlds except ubd server/driver is
used on UML arch, :-) So looks not one big issue.

>
> > @@ -0,0 +1,1193 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * Userspace block device - block device which IO is handled from userspace
> > + *
> > + * Take full use of io_uring passthrough command for communicating with
> > + * ubd userspace daemon(ubdsrvd) for handling basic IO request.
> > + *
> > + * Copyright 2022 Ming Lei <ming.lei@redhat.com>
> > + *
> > + * (part of code stolen from loop.c)
> > + */
> > +#include <linux/module.h>
> > +#include <linux/moduleparam.h>
> > +#include <linux/sched.h>
> > +#include <linux/fs.h>
> > +#include <linux/pagemap.h>
> > +#include <linux/file.h>
> > +#include <linux/stat.h>
> > +#include <linux/errno.h>
> > +#include <linux/major.h>
> > +#include <linux/wait.h>
> > +#include <linux/blkdev.h>
> > +#include <linux/init.h>
> > +#include <linux/swap.h>
> > +#include <linux/slab.h>
> > +#include <linux/compat.h>
> > +#include <linux/mutex.h>
> > +#include <linux/writeback.h>
> > +#include <linux/completion.h>
> > +#include <linux/highmem.h>
> > +#include <linux/sysfs.h>
> > +#include <linux/miscdevice.h>
> > +#include <linux/falloc.h>
> > +#include <linux/uio.h>
> > +#include <linux/ioprio.h>
> > +#include <linux/sched/mm.h>
> > +#include <linux/uaccess.h>
> > +#include <linux/cdev.h>
> > +#include <linux/io_uring.h>
> > +#include <linux/blk-mq.h>
> > +#include <linux/delay.h>
> > +#include <linux/mm.h>
> > +#include <asm/page.h>
> > +#include <linux/task_work.h>
> > +#include <uapi/linux/ubd_cmd.h>
> > +
> > +#define UBD_MINORS (1U << MINORBITS)
> > +
> > +struct ubd_abort_work {
> > + struct ubd_device *ub;
> > + unsigned int q_id;
> > + struct work_struct work;
> > +};
> > +
> > +struct ubd_rq_data {
> > + struct callback_head work;
> > +};
> > +
> > +/* io cmd is active: sqe cmd is received, and its cqe isn't done */
> > +#define UBD_IO_FLAG_ACTIVE 0x01
> > +
> > +/*
> > + * FETCH io cmd is completed via cqe, and the io cmd is being handled by
> > + * ubdsrv, and not committed yet
> > + */
> > +#define UBD_IO_FLAG_OWNED_BY_SRV 0x02
> > +
> > +struct ubd_io {
> > + /* userspace buffer address from io cmd */
> > + __u64 addr;
> > + unsigned int flags;
> > + unsigned int res;
> > +
> > + struct io_uring_cmd *cmd;
> > +};
> > +
> > +struct ubd_queue {
> > + int q_id;
> > + int q_depth;
> > +
> > + struct task_struct *ubq_daemon;
> > + char *io_cmd_buf;
> > +
> > + unsigned long io_addr; /* mapped vm address */
> > + unsigned int max_io_sz;
> > + bool aborted;
> > + struct ubd_io ios[0];
> > +};
> > +
> > +struct ubd_device {
> > + struct gendisk *ub_disk;
> > + struct request_queue *ub_queue;
> > +
> > + char *__queues;
> > +
> > + unsigned short queue_size;
> > + unsigned short bs_shift;
> > + unsigned int nr_aborted_queues;
> > + struct ubdsrv_ctrl_dev_info dev_info;
> > +
> > + struct blk_mq_tag_set tag_set;
> > +
> > + struct cdev cdev;
> > + struct device cdev_dev;
> > +
> > + atomic_t ch_open_cnt;
> > + int ub_number;
> > +
> > + struct mutex mutex;
> > +};
> > +
> > +static dev_t ubd_chr_devt;
> > +static struct class *ubd_chr_class;
> > +
> > +static DEFINE_IDR(ubd_index_idr);
> > +static DEFINE_MUTEX(ubd_ctl_mutex);
> > +
> > +static struct miscdevice ubd_misc;
> > +
> > +static inline struct ubd_queue *ubd_get_queue(struct ubd_device *dev, int qid)
> > +{
> > + return (struct ubd_queue *)&(dev->__queues[qid * dev->queue_size]);
> > +}
> > +
> > +static inline bool ubd_rq_need_copy(struct request *rq)
> > +{
> > + return rq->bio && bio_has_data(rq->bio);
> > +}
> > +
> > +static inline struct ubdsrv_io_desc *ubd_get_iod(struct ubd_queue *ubq, int tag)
> > +{
> > + return (struct ubdsrv_io_desc *)
> > + &(ubq->io_cmd_buf[tag * sizeof(struct ubdsrv_io_desc)]);
> > +}
> > +
> > +static inline char *ubd_queue_cmd_buf(struct ubd_device *ub, int q_id)
> > +{
> > + return ubd_get_queue(ub, q_id)->io_cmd_buf;
> > +}
> > +
> > +static inline int ubd_queue_cmd_buf_size(struct ubd_device *ub, int q_id)
> > +{
> > + struct ubd_queue *ubq = ubd_get_queue(ub, q_id);
> > +
> > + return round_up(ubq->q_depth * sizeof(struct ubdsrv_io_desc), PAGE_SIZE);
> > +}
> > +
> > +static int ubd_open(struct block_device *bdev, fmode_t mode)
> > +{
> > + return 0;
> > +}
> > +
> > +static void ubd_release(struct gendisk *disk, fmode_t mode)
> > +{
> > +}
> > +
> > +static const struct block_device_operations ub_fops = {
> > + .owner = THIS_MODULE,
> > + .open = ubd_open,
> > + .release = ubd_release,
> > +};
> > +
> > +#define UBD_MAX_PIN_PAGES 32
> > +
> > +static void ubd_release_pages(struct ubd_device *ub, struct page **pages,
> > + int nr_pages)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < nr_pages; i++)
> > + put_page(pages[i]);
> > +}
> > +
> > +static int ubd_pin_user_pages(struct ubd_device *ub, u64 start_vm,
> > + struct page **pages, unsigned int nr_pages, bool to_rq)
> > +{
> > + unsigned int gup_flags = to_rq ? 0 : FOLL_WRITE;
> > +
> > + return get_user_pages_fast(start_vm, nr_pages, gup_flags, pages);
> > +}
> > +
> > +static inline unsigned ubd_copy_bv(struct bio_vec *bv, void **bv_addr,
> > + void *pg_addr, unsigned int *pg_off,
> > + unsigned int *pg_len, bool to_bv)
> > +{
> > + unsigned len = min_t(unsigned, bv->bv_len, *pg_len);
> > +
> > + if (*bv_addr == NULL)
> > + *bv_addr = kmap_local_page(bv->bv_page);
> > +
> > + if (to_bv)
> > + memcpy(*bv_addr + bv->bv_offset, pg_addr + *pg_off, len);
> > + else
> > + memcpy(pg_addr + *pg_off, *bv_addr + bv->bv_offset, len);
> > +
> > + bv->bv_offset += len;
> > + bv->bv_len -= len;
> > + *pg_off += len;
> > + *pg_len -= len;
> > +
> > + if (!bv->bv_len) {
> > + kunmap_local(*bv_addr);
> > + *bv_addr = NULL;
> > + }
> > +
> > + return len;
> > +}
> > +
> > +/* copy rq pages to ubdsrv vm address pointed by io->addr */
> > +static int ubd_copy_pages(struct ubd_device *ub, struct request *rq)
> > +{
> > + struct ubd_queue *ubq = rq->mq_hctx->driver_data;
> > + struct ubd_io *io = &ubq->ios[rq->tag];
> > + struct page *pgs[UBD_MAX_PIN_PAGES];
> > + const bool to_rq = !op_is_write(rq->cmd_flags);
> > + struct req_iterator req_iter;
> > + struct bio_vec bv;
> > + unsigned long start = io->addr, left = rq->__data_len;
> > + unsigned int idx = 0, pg_len = 0, pg_off = 0;
> > + int nr_pin = 0;
> > + void *pg_addr = NULL;
> > + struct page *curr = NULL;
> > +
> > + rq_for_each_segment(bv, rq, req_iter) {
> > + unsigned len, bv_off = bv.bv_offset, bv_len = bv.bv_len;
> > + void *bv_addr = NULL;
> > +
> > +refill:
> > + if (pg_len == 0) {
> > + unsigned int off = 0;
> > +
> > + if (pg_addr) {
> > + kunmap_local(pg_addr);
> > + if (!to_rq)
> > + set_page_dirty_lock(curr);
> > + pg_addr = NULL;
> > + }
> > +
> > + /* refill pages */
> > + if (idx >= nr_pin) {
> > + unsigned int max_pages;
> > +
> > + ubd_release_pages(ub, pgs, nr_pin);
> > +
> > + off = start & (PAGE_SIZE - 1);
> > + max_pages = round_up(off + left, PAGE_SIZE);
> > + nr_pin = min_t(unsigned, UBD_MAX_PIN_PAGES, max_pages);
> > + nr_pin = ubd_pin_user_pages(ub, start, pgs,
> > + nr_pin, to_rq);
> > + if (nr_pin <= 0)
> > + return -EINVAL;
> > + idx = 0;
> > + }
> > + pg_off = off;
> > + pg_len = min(PAGE_SIZE - off, left);
> > + off = 0;
> > + curr = pgs[idx++];
> > + pg_addr = kmap_local_page(curr);
> > + }
> > +
> > + len = ubd_copy_bv(&bv, &bv_addr, pg_addr, &pg_off, &pg_len,
> > + to_rq);
> > + /* either one of the two has been consumed */
> > + WARN_ON_ONCE(bv.bv_len && pg_len);
> > + start += len;
> > + left -= len;
> > +
> > + /* overflow */
> > + WARN_ON_ONCE(left > rq->__data_len);
> > + WARN_ON_ONCE(bv.bv_len > bv_len);
> > + if (bv.bv_len)
> > + goto refill;
> > +
> > + bv.bv_len = bv_len;
> > + bv.bv_offset = bv_off;
> > + }
> > + if (pg_addr) {
> > + kunmap_local(pg_addr);
> > + if (!to_rq)
> > + set_page_dirty_lock(curr);
> > + }
> > + ubd_release_pages(ub, pgs, nr_pin);
> > +
> > + WARN_ON_ONCE(left != 0);
> > +
> > + return 0;
> > +}
> > +
> > +#define UBD_REMAP_BATCH 32
> > +
> > +static int ubd_map_io(struct ubd_device *ub, struct request *req)
> > +{
> > + /*
> > + * no zero copy, we delay copy WRITE request data into ubdsrv
> > + * context via task_work_add and the big benefit is that pinning
> > + * pages in current context is pretty fast, see ubd_pin_user_pages
> > + */
> > + if (!op_is_write(req->cmd_flags) || !ubd_rq_need_copy(req))
> > + return 0;
> > +
> > + /* convert to data copy in current context */
> > + return ubd_copy_pages(ub, req);
> > +}
> > +
> > +static int ubd_unmap_io(struct request *req)
> > +{
> > + struct ubd_device *ub = req->q->queuedata;
> > +
> > + if (!op_is_write(req->cmd_flags) && ubd_rq_need_copy(req))
> > + return ubd_copy_pages(ub, req);
> > + return 0;
> > +}
> > +
> > +static inline unsigned int ubd_req_build_flags(struct request *req)
> > +{
> > + unsigned flags = 0;
> > +
> > + if (req->cmd_flags & REQ_FAILFAST_DEV)
> > + flags |= UBD_IO_F_FAILFAST_DEV;
> > +
> > + if (req->cmd_flags & REQ_FAILFAST_TRANSPORT)
> > + flags |= UBD_IO_F_FAILFAST_TRANSPORT;
> > +
> > + if (req->cmd_flags & REQ_FAILFAST_DRIVER)
> > + flags |= UBD_IO_F_FAILFAST_DRIVER;
> > +
> > + if (req->cmd_flags & REQ_META)
> > + flags |= UBD_IO_F_META;
> > +
> > + if (req->cmd_flags & REQ_INTEGRITY)
> > + flags |= UBD_IO_F_INTEGRITY;
> > +
> > + if (req->cmd_flags & REQ_FUA)
> > + flags |= UBD_IO_F_FUA;
> > +
> > + if (req->cmd_flags & REQ_PREFLUSH)
> > + flags |= UBD_IO_F_PREFLUSH;
> > +
> > + if (req->cmd_flags & REQ_NOUNMAP)
> > + flags |= UBD_IO_F_NOUNMAP;
> > +
> > + if (req->cmd_flags & REQ_SWAP)
> > + flags |= UBD_IO_F_SWAP;
> > +
> > + return flags;
> > +}
> > +
> > +static int ubd_setup_iod(struct ubd_queue *ubq, struct request *req)
> > +{
> > + struct ubdsrv_io_desc *iod = ubd_get_iod(ubq, req->tag);
> > + struct ubd_io *io = &ubq->ios[req->tag];
> > + u32 ubd_op;
> > +
> > + switch (req_op(req)) {
> > + case REQ_OP_READ:
> > + ubd_op = UBD_IO_OP_READ;
> > + break;
> > + case REQ_OP_WRITE:
> > + ubd_op = UBD_IO_OP_WRITE;
> > + break;
> > + case REQ_OP_FLUSH:
> > + ubd_op = UBD_IO_OP_FLUSH;
> > + break;
> > + case REQ_OP_DISCARD:
> > + ubd_op = UBD_IO_OP_DISCARD;
> > + break;
> > + case REQ_OP_WRITE_ZEROES:
> > + ubd_op = UBD_IO_OP_WRITE_ZEROES;
> > + break;
> > + default:
> > + return BLK_STS_IOERR;
> > + }
> > +
> > + /* need to translate since kernel may change */
> > + iod->op_flags = ubd_op | ubd_req_build_flags(req);
> > + iod->tag_blocks = req->tag | (blk_rq_sectors(req) << 12);
> > + iod->start_block = blk_rq_pos(req);
> > + iod->addr = io->addr;
> > +
> > + return BLK_STS_OK;
> > +}
> > +
> > +static blk_status_t ubd_queue_rq(struct blk_mq_hw_ctx *hctx,
> > + const struct blk_mq_queue_data *bd)
> > +{
> > + struct ubd_queue *ubq = hctx->driver_data;
> > + struct request *rq = bd->rq;
> > + struct ubd_io *io = &ubq->ios[rq->tag];
> > + struct ubd_rq_data *data = blk_mq_rq_to_pdu(rq);
> > + blk_status_t res;
> > +
> > + if (ubq->aborted)
> > + return BLK_STS_IOERR;
> > +
> > + /* this io cmd slot isn't active, so have to fail this io */
> > + if (WARN_ON_ONCE(!(io->flags & UBD_IO_FLAG_ACTIVE)))
> > + return BLK_STS_IOERR;
> > +
> > + /* fill iod to slot in io cmd buffer */
> > + res = ubd_setup_iod(ubq, rq);
> > + if (res != BLK_STS_OK)
> > + return BLK_STS_IOERR;
> > +
> > + blk_mq_start_request(bd->rq);
> > +
> > + /* mark this cmd owned by ubdsrv */
> > + io->flags |= UBD_IO_FLAG_OWNED_BY_SRV;
> > +
> > + /*
> > + * clear ACTIVE since we are done with this sqe/cmd slot
> > + *
> > + * We can only accept io cmd in case of being not active.
> > + */
> > + io->flags &= ~UBD_IO_FLAG_ACTIVE;
> > +
> > + /*
> > + * run data copy in task work context for WRITE, and complete io_uring
> > + * cmd there too.
> > + *
> > + * This way should improve batching, meantime pinning pages in current
> > + * context is pretty fast.
> > + */
> > + task_work_add(ubq->ubq_daemon, &data->work, TWA_SIGNAL);
> > +
> > + return BLK_STS_OK;
> > +}
> > +
> > +static void ubd_complete_rq(struct request *req)
> > +{
> > + struct ubd_queue *ubq = req->mq_hctx->driver_data;
> > + struct ubd_io *io = &ubq->ios[req->tag];
> > +
> > + /* for READ request, writing data in iod->addr to rq buffers */
> > + ubd_unmap_io(req);
> > +
> > + blk_mq_end_request(req, io->res);
> > +}
> > +
> > +static void ubd_rq_task_work_fn(struct callback_head *work)
> > +{
> > + struct ubd_rq_data *data = container_of(work,
> > + struct ubd_rq_data, work);
> > + struct request *req = blk_mq_rq_from_pdu(data);
> > + struct ubd_queue *ubq = req->mq_hctx->driver_data;
> > + struct ubd_io *io = &ubq->ios[req->tag];
> > + struct ubd_device *ub = req->q->queuedata;
> > + int ret = UBD_IO_RES_OK;
> > +
> > + if (ubd_map_io(ub, req))
> > + ret = UBD_IO_RES_DATA_BAD;
> > +
> > + pr_devel("%s: complete: cmd op %d, tag %d ret %x io_flags %x, addr %llx\n",
> > + __func__, io->cmd->cmd_op, req->tag, ret, io->flags,
> > + ubd_get_iod(ubq, req->tag)->addr);
> > + /* tell ubdsrv one io request is coming */
> > + io_uring_cmd_done(io->cmd, ret, 0);
> > +}
> > +
> > +static int ubd_init_hctx(struct blk_mq_hw_ctx *hctx, void *driver_data,
> > + unsigned int hctx_idx)
> > +{
> > + struct ubd_device *ub = hctx->queue->queuedata;
> > + struct ubd_queue *ubq = ubd_get_queue(ub, hctx->queue_num);
> > +
> > + hctx->driver_data = ubq;
> > + return 0;
> > +}
> > +
> > +static int ubd_init_rq(struct blk_mq_tag_set *set, struct request *req,
> > + unsigned int hctx_idx, unsigned int numa_node)
> > +{
> > + struct ubd_rq_data *data = blk_mq_rq_to_pdu(req);
> > +
> > + init_task_work(&data->work, ubd_rq_task_work_fn);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct blk_mq_ops ubd_mq_ops = {
> > + .queue_rq = ubd_queue_rq,
> > + .init_hctx = ubd_init_hctx,
> > + .init_request = ubd_init_rq,
> > +};
> > +
> > +static int ubd_ch_open(struct inode *inode, struct file *filp)
> > +{
> > + struct ubd_device *ub = container_of(inode->i_cdev,
> > + struct ubd_device, cdev);
> > +
> > + if (atomic_cmpxchg(&ub->ch_open_cnt, 0, 1) == 0) {
> > + filp->private_data = ub;
> > + return 0;
> > + }
> > + return -EBUSY;
> > +}
> > +
> > +static int ubd_ch_release(struct inode *inode, struct file *filp)
> > +{
> > + struct ubd_device *ub = filp->private_data;
> > +
> > + while (atomic_cmpxchg(&ub->ch_open_cnt, 1, 0) != 1)
> > + cpu_relax();
> > +
> > + filp->private_data = NULL;
> > + return 0;
> > +}
> > +
> > +/* map pre-allocated per-queue cmd buffer to ubdsrv daemon */
> > +static int ubd_ch_mmap(struct file *filp, struct vm_area_struct *vma)
> > +{
> > + struct ubd_device *ub = filp->private_data;
> > + size_t sz = vma->vm_end - vma->vm_start;
> > + unsigned max_sz = UBD_MAX_QUEUE_DEPTH * sizeof(struct ubdsrv_io_desc);
> > + unsigned long pfn, end;
> > + int q_id;
> > +
> > + end = UBDSRV_CMD_BUF_OFFSET + ub->dev_info.nr_hw_queues * max_sz;
> > + if (vma->vm_pgoff < UBDSRV_CMD_BUF_OFFSET || vma->vm_pgoff >= end)
> > + return -EINVAL;
> > +
> > + q_id = (vma->vm_pgoff - UBDSRV_CMD_BUF_OFFSET) / max_sz;
> > +
> > + if (sz != ubd_queue_cmd_buf_size(ub, q_id))
> > + return -EINVAL;
> > +
> > + pfn = virt_to_phys(ubd_queue_cmd_buf(ub, q_id)) >> PAGE_SHIFT;
> > + return remap_pfn_range(vma, vma->vm_start, pfn, sz, vma->vm_page_prot);
> > +}
> > +
> > +static void ubd_commit_completion(struct ubd_device *ub,
> > + struct ubdsrv_io_cmd *ub_cmd)
> > +{
> > + u32 qid = ub_cmd->q_id, tag = ub_cmd->tag;
> > + struct ubd_queue *ubq = ubd_get_queue(ub, qid);
> > + struct ubd_io *io = &ubq->ios[tag];
> > + struct request *req;
> > +
> > + /* now this cmd slot is owned by nbd driver */
> > + io->flags &= ~UBD_IO_FLAG_OWNED_BY_SRV;
> > + io->res = ub_cmd->result;
> > +
> > + /* find the io request and complete */
> > + req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], ub_cmd->tag);
> > +
> > + if (req && likely(!blk_should_fake_timeout(req->q)))
> > + ubd_complete_rq(req);
> > +}
> > +
> > +/* has to be called disk is dead or frozen */
> > +static int ubd_abort_queue(struct ubd_device *ub, int qid)
> > +{
> > + int ret = UBD_IO_RES_ABORT;
> > + struct ubd_queue *q = ubd_get_queue(ub, qid);
> > + int i;
> > +
> > + for (i = 0; i < q->q_depth; i++) {
> > + struct ubd_io *io = &q->ios[i];
> > +
> > + if (io->flags & UBD_IO_FLAG_ACTIVE) {
> > + io->flags &= ~UBD_IO_FLAG_ACTIVE;
> > + io_uring_cmd_done(io->cmd, ret, 0);
> > + }
> > + }
> > + q->ubq_daemon = NULL;
> > + return 0;
> > +}
> > +
> > +static void ubd_abort_work_fn(struct work_struct *work)
> > +{
> > + struct ubd_abort_work *abort_work =
> > + container_of(work, struct ubd_abort_work, work);
> > + struct ubd_device *ub = abort_work->ub;
> > + struct ubd_queue *ubq = ubd_get_queue(ub, abort_work->q_id);
> > +
> > + blk_mq_freeze_queue(ub->ub_queue);
> > + mutex_lock(&ub->mutex);
> > + if (!ubq->aborted) {
> > + ubq->aborted = true;
> > + ubd_abort_queue(ub, abort_work->q_id);
> > + ub->nr_aborted_queues++;
> > + }
> > + mutex_unlock(&ub->mutex);
> > + blk_mq_unfreeze_queue(ub->ub_queue);
> > +
> > + mutex_lock(&ub->mutex);
> > + if (ub->nr_aborted_queues == ub->dev_info.nr_hw_queues) {
> > + if (disk_live(ub->ub_disk))
> > + del_gendisk(ub->ub_disk);
> > + }
> > + mutex_unlock(&ub->mutex);
> > +
> > + kfree(abort_work);
> > +}
> > +
> > +static int ubd_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
> > +{
> > + struct ubdsrv_io_cmd *ub_cmd = (struct ubdsrv_io_cmd *)cmd->cmd;
> > + struct ubd_device *ub = cmd->file->private_data;
> > + struct ubd_queue *ubq;
> > + struct ubd_io *io;
> > + u32 cmd_op = cmd->cmd_op;
> > + unsigned tag = ub_cmd->tag;
> > + int ret = UBD_IO_RES_INVALID_SQE;
> > +
> > + pr_devel("%s: receieved: cmd op %d, tag %d, queue %d\n",
> > + __func__, cmd->cmd_op, tag, ub_cmd->q_id);
> > +
> > + if (!(issue_flags & IO_URING_F_SQE128))
> > + goto out;
> > +
> > + if (cmd_op == UBD_IO_ABORT_QUEUE) {
> > + struct ubd_abort_work *work = kzalloc(sizeof(*work),
> > + GFP_KERNEL);
> > + if (!work)
> > + goto out;
> > +
> > + INIT_WORK(&work->work, ubd_abort_work_fn);
> > + work->ub = ub;
> > + work->q_id = ub_cmd->q_id;
> > +
> > + schedule_work(&work->work);
> > + ret = UBD_IO_RES_OK;
> > + goto out_done;
> > + }
> > +
> > + ubq = ubd_get_queue(ub, ub_cmd->q_id);
> > + if (WARN_ON_ONCE(tag >= ubq->q_depth))
> > + goto out;
> > +
> > + io = &ubq->ios[tag];
> > +
> > + /* there is pending io cmd, something must be wrong */
> > + if (io->flags & UBD_IO_FLAG_ACTIVE) {
> > + ret = UBD_IO_RES_BUSY;
> > + goto out;
> > + }
> > +
> > + switch (cmd_op) {
> > + case UBD_IO_FETCH_REQ:
> > + /* FETCH_REQ is only issued when starting device */
> > + mutex_lock(&ub->mutex);
> > + if (!ubq->ubq_daemon)
> > + ubq->ubq_daemon = current;
>
> I find it slightly weird to set ubq_daemon per-request. It would cause

It is per-queue, so each ubd_daemon can handle any IO from this blk-mq of ubd driver
with same qid, and each ubd_daemon has its own io_uring for handling io command or
even IO request.

> weird corruptions if a buggy thread sends a FETCH_REQ to the wrong q_id

If one buggy thread sends wrong command, we should fail the io_uring command,
will fix the issue.

> after another request in-flight has already set ubq_daemon. I was also
> working on MQ and I was thinking of dropping the q_id field from the
> io_uring command, implying it from the fd that was opened. Then, I let

With q_id field, we can validate if it is one expected command on this
queue.

> each thread reopen the char device to configure a new queue:
>
> fd = open("/dev/ubdc0", O_RDWR); // Connects to a new queue
>
> fd is closed with fork/exec.

Not sure it can be done in this way, /dev/ubdc0 is device wide
controller, and one device/disk has multiple queue.

Also MQ has been ready for use, please test the ubdsrv pointed by link
in the comment log, and see if it works for you.

>
> > +static int ubd_ctrl_start_dev(struct ubd_device *ub, struct io_uring_cmd *cmd)
> > +{
> > + struct ubdsrv_ctrl_dev_info *info = (struct ubdsrv_ctrl_dev_info *)cmd->cmd;
> > + int ret = -EINVAL;
> > + unsigned long end = jiffies + 3 * HZ;
> > +
> > + if (info->ubdsrv_pid <= 0)
> > + return -1;
> > +
> > + mutex_lock(&ub->mutex);
> > +
> > + ub->dev_info.ubdsrv_pid = info->ubdsrv_pid;
> > + if (disk_live(ub->ub_disk))
> > + goto unlock;
> > + while (time_before(jiffies, end)) {
> > + if (ubd_io_ready(ub)) {
> > + ret = 0;
> > + break;
> > + }
> > + msleep(100);
> > + }
>
> This timer is quite weird, in my opinion. Shouldn't we fail start_dev
> and let userspace retry the command at a later time?

Yeah, we can start dev in retry style, but ubdsrv part will become
a bit complicated. Since it is a one-shot admin command, it is fine
to wait in this way IMO.

Or per-queue completion can be used here, then we can replace the random
wait with wait_for_completion_killable() on each queue here, are you
fine with this way?

>
> > + unlock:
> > + mutex_unlock(&ub->mutex);
> > + pr_devel("%s: device io ready %d\n", __func__, !ret);
> > +
> > + if (ret == 0)
> > + ret = add_disk(ub->ub_disk);
> > +
> > + return ret;
> > +}
> > +
> > +static inline void ubd_dump(struct io_uring_cmd *cmd)
> > +{
> > +#ifdef DEBUG
> > + struct ubdsrv_ctrl_dev_info *info =
> > + (struct ubdsrv_ctrl_dev_info *)cmd->cmd;
> > +
> > + printk("%s: cmd_op %x, dev id %d flags %llx\n", __func__,
> > + cmd->cmd_op, info->dev_id, info->flags);
> > +
> > + printk("\t nr_hw_queues %d queue_depth %d block size %d dev_capacity %lld\n",
> > + info->nr_hw_queues, info->queue_depth,
> > + info->block_size, info->dev_blocks);
> > +#endif
> > +}
>
> Maybe pr_debug or tracepoint?

OK, will switch to pr_debug.

tracepoint usually has to be stable, and I'd suggest to not add it
until ubd driver is merged.

>
> > +MODULE_AUTHOR("Ming Lei <ming.lei@redhat.com>");
> > +MODULE_LICENSE("GPL");
> > diff --git a/include/uapi/linux/ubd_cmd.h b/include/uapi/linux/ubd_cmd.h
> > new file mode 100644
> > index 000000000000..8ecea6aa9cfe
> > --- /dev/null
> > +++ b/include/uapi/linux/ubd_cmd.h
> > @@ -0,0 +1,167 @@
> > +#ifndef USER_BLK_DRV_CMD_INC_H
> > +#define USER_BLK_DRV_CMD_INC_H
> > +
> > +/* ubd server command definition */
> > +
> > +/* CMD result code */
> > +#define UBD_CTRL_CMD_RES_OK 0
> > +#define UBD_CTRL_CMD_RES_FAILED -1
> > +
> > +/*
> > + * Admin commands, issued by ubd server, and handled by ubd driver.
> > + */
> > +#define UBD_CMD_SET_DEV_INFO 0x01
> > +#define UBD_CMD_GET_DEV_INFO 0x02
> > +#define UBD_CMD_ADD_DEV 0x04
> > +#define UBD_CMD_DEL_DEV 0x05
> > +#define UBD_CMD_START_DEV 0x06
> > +#define UBD_CMD_STOP_DEV 0x07
> > +
> > +/*
> > + * IO commands, issued by ubd server, and handled by ubd driver.
> > + *
> > + * FETCH_REQ: issued via sqe(URING_CMD) beforehand for fetching IO request
> > + * from ubd driver, should be issued only when starting device. After
> > + * the associated cqe is returned, request's tag can be retrieved via
> > + * cqe->userdata.
> > + *
> > + * COMMIT_AND_FETCH_REQ: issued via sqe(URING_CMD) after ubdserver handled
> > + * this IO request, request's handling result is committed to ubd
> > + * driver, meantime FETCH_REQ is piggyback, and FETCH_REQ has to be
> > + * handled before completing io request.
> > + *
> > + * COMMIT_REQ: issued via sqe(URING_CMD) after ubdserver handled this IO
> > + * request, request's handling result is committed to ubd driver.
> > + *
> > + * ABORT_QUEUE: issued via sqe(URING_CMD) and abort all active commands,
> > + * meantime ubdserver can't issue any FETCH_REQ commands
> > + */
> > +#define UBD_IO_FETCH_REQ 0x20
> > +#define UBD_IO_COMMIT_AND_FETCH_REQ 0x21
> > +#define UBD_IO_COMMIT_REQ 0x22
> > +#define UBD_IO_ABORT_QUEUE 0x23
> > +
> > +#define UBD_IO_RES_OK 0x01
> > +#define UBD_IO_RES_INVALID_SQE 0x5f
> > +#define UBD_IO_RES_INVALID_TAG 0x5e
> > +#define UBD_IO_RES_INVALID_QUEUE 0x5d
> > +#define UBD_IO_RES_BUSY 0x5c
> > +#define UBD_IO_RES_DUP_FETCH 0x5b
> > +#define UBD_IO_RES_UNEXPECTED_CMD 0x5a
> > +#define UBD_IO_RES_DATA_BAD 0x59
> > +
> > +/* only ABORT means that no re-fetch */
> > +#define UBD_IO_RES_ABORT 0x59
> > +
> > +#define UBDSRV_CMD_BUF_OFFSET 0
> > +#define UBDSRV_IO_BUF_OFFSET 0x80000000
> > +
> > +/* tag bit is 12bit, so at most 4096 IOs for each queue */
> > +#define UBD_MAX_QUEUE_DEPTH 4096
> > +
> > +/*
> > + * zero copy requires 4k block size, and can remap ubd driver's io
> > + * request into ubdsrv's vm space
> > + */
> > +#define UBD_F_SUPPORT_ZERO_COPY 0
> > +
> > +struct ubdsrv_ctrl_dev_info {
> > + __u16 nr_hw_queues;
> > + __u16 queue_depth;
> > + __u16 block_size;
> > + __u16 state;
> > +
> > + __u32 rq_max_blocks;
> > + __u32 dev_id;
> > +
> > + __u64 dev_blocks;
> > + __u64 flags;
> > +
> > + /*
> > + * Only valid for READ kind of ctrl command, and driver can
> > + * get the userspace buffer address here, then write data
> > + * into this buffer.
> > + *
> > + * And the buffer has to be inside one single page.
> > + */
> > + __u64 addr;
> > + __u32 len;
> > + __s32 ubdsrv_pid;
> > + __u64 reserved0[2];
> > +};
>
> I was about to send you a patch to simplify the interface for
> different commands. My plan was to avoid passing parts of the structure for
> commands that don't use it, considering the limit of io_uring cmd length.
>
> struct ubdsrv_ctrl_dev_info {
> __u32 dev_id;
> union {
>
> char raw[28]; /* Maximum size for iouring_command */
>
> struct {
> __u32 rq_max_blocks;
> __s32 ubdsrv_pid;
>
> __u16 nr_hw_queues;
> __u16 queue_depth;
> __u16 block_size;
> __u16 state;
>
> __u64 dev_blocks;
> __u64 flags;
> }, /* UBD_CMD_ADD_DEV */
>
> struct {
> __u64 addr;
> __u32 len;
> } /* CMD_GET_DEV_INFO */
> }
> };
>
> What do you think?

'ubd add' command needs output buffer too:

1) if -1 dev_id is passed in, one valid device id need to be passed back
via the buffer

2) ubdsrv has to update some parameters and pass them back, such as too
big nr_hw_queues, or unaligned rq_max_blocks,...

If you worry that dev_info may be run out of SQE128 in future, one ideal
way is to always pass dev_info in/out as one userspace buffer. Meantime we
extend it to 128byte, so far it is defined as 64bytes. Now only
UBD_CMD_STOP_DEV needn't the dev_info buffer.

Also we need to add comment on ubdsrv_ctrl_dev_info wrt. which fields
are IN or OUT or both.

>
> in addition, I think UBD_CMD_ADD_DEV should embed an extra protocol
> version field, for future extension.

Yeah, that was in my mind too, just not getting exact way for how to
use the version number. Also one 64 bit flags have been there for
extending in future, seems not see need on version number.

UBD_CMD_ADD_DEV can be thought as one negotiation procedure, after
it is returned, ubd drv will update flags to reflect features the
driver supports, most or all should be new commands or new fields
in ubdsrv_ctrl_dev_info.

Also the principle is to let ubd driver focus on io command communication
and data copy, and let userspace part handle all logics, so in future
there shouldn't too much extension on interface between userspace and ubd
kernel driver.


Thanks,
Ming

\
 
 \ /
  Last update: 2022-05-10 03:58    [W:0.243 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site