lkml.org 
[lkml]   [2022]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] arm64: dts: qcom: sdm630: order regs according to bindings
Date
The CAMSS DTSI device node, which came after the bindings were merged,
got the regs ordered differently then specified in the bindings:

sdm636-sony-xperia-ganges-mermaid.dtb: camss@ca00000: reg-names:0: 'csi_clk_mux' was expected

Reordering them to match bindings should not cause ABI issues, because
the driver relies on names, not ordering.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm630.dtsi | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 8f623238c238..594a802e9429 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1842,32 +1842,32 @@ pil-reloc@94c {

camss: camss@ca00000 {
compatible = "qcom,sdm660-camss";
- reg = <0x0c824000 0x1000>,
+ reg = <0x0ca00020 0x10>,
+ <0x0ca30000 0x100>,
+ <0x0ca30400 0x100>,
+ <0x0ca30800 0x100>,
+ <0x0ca30c00 0x100>,
+ <0x0c824000 0x1000>,
<0x0ca00120 0x4>,
<0x0c825000 0x1000>,
<0x0ca00124 0x4>,
<0x0c826000 0x1000>,
<0x0ca00128 0x4>,
- <0x0ca30000 0x100>,
- <0x0ca30400 0x100>,
- <0x0ca30800 0x100>,
- <0x0ca30c00 0x100>,
<0x0ca31000 0x500>,
- <0x0ca00020 0x10>,
<0x0ca10000 0x1000>,
<0x0ca14000 0x1000>;
- reg-names = "csiphy0",
+ reg-names = "csi_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "csiphy0",
"csiphy0_clk_mux",
"csiphy1",
"csiphy1_clk_mux",
"csiphy2",
"csiphy2_clk_mux",
- "csid0",
- "csid1",
- "csid2",
- "csid3",
"ispif",
- "csi_clk_mux",
"vfe0",
"vfe1";
interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
--
2.32.0
\
 
 \ /
  Last update: 2022-05-09 16:49    [W:0.170 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site