lkml.org 
[lkml]   [2022]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 09/26] ALSA: hda: cs35l41: Add Amp Name based on channel and index
Date
From: Stefan Binding <sbinding@opensource.cirrus.com>

This will be used to identify ALSA controls and firmware.
The Amp Name will be a channel identifier (L or R), and an
index, which identifies which amp for that channel.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
---
sound/pci/hda/cs35l41_hda.c | 17 +++++++++++++++++
sound/pci/hda/cs35l41_hda.h | 2 ++
2 files changed, 19 insertions(+)

diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index 2608bf4a6851..cce27a86267f 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -88,6 +88,17 @@ static int cs35l41_hda_channel_map(struct device *dev, unsigned int tx_num, unsi
unsigned int rx_num, unsigned int *rx_slot)
{
struct cs35l41_hda *cs35l41 = dev_get_drvdata(dev);
+ static const char * const channel_name[] = { "L", "R" };
+
+ if (!cs35l41->amp_name) {
+ if (*rx_slot >= ARRAY_SIZE(channel_name))
+ return -EINVAL;
+
+ cs35l41->amp_name = devm_kasprintf(cs35l41->dev, GFP_KERNEL, "%s%d",
+ channel_name[*rx_slot], cs35l41->channel_index);
+ if (!cs35l41->amp_name)
+ return -ENOMEM;
+ }

return cs35l41_set_channels(cs35l41->dev, cs35l41->regmap, tx_num, tx_slot, rx_num,
rx_slot);
@@ -345,6 +356,11 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
goto err;
hw_cfg->spk_pos = values[cs35l41->index];

+ cs35l41->channel_index = 0;
+ for (i = 0; i < cs35l41->index; i++)
+ if (values[i] == hw_cfg->spk_pos)
+ cs35l41->channel_index++;
+
property = "cirrus,gpio1-func";
ret = device_property_read_u32_array(physdev, property, values, nval);
if (ret)
@@ -410,6 +426,7 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
/* check I2C address to assign the index */
cs35l41->index = id == 0x40 ? 0 : 1;
cs35l41->hw_cfg.spk_pos = cs35l41->index;
+ cs35l41->channel_index = 0;
cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0, GPIOD_OUT_HIGH);
cs35l41->hw_cfg.bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH;
hw_cfg->gpio2.func = CS35L41_GPIO2_INT_OPEN_DRAIN;
diff --git a/sound/pci/hda/cs35l41_hda.h b/sound/pci/hda/cs35l41_hda.h
index c486e4a5bb24..a52ffd1f7999 100644
--- a/sound/pci/hda/cs35l41_hda.h
+++ b/sound/pci/hda/cs35l41_hda.h
@@ -35,7 +35,9 @@ struct cs35l41_hda {

int irq;
int index;
+ int channel_index;
unsigned volatile long irq_errors;
+ const char *amp_name;
struct regmap_irq_chip_data *irq_data;
};

--
2.34.1
\
 
 \ /
  Last update: 2022-05-09 23:50    [W:0.120 / U:1.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site