lkml.org 
[lkml]   [2022]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 22/26] ALSA: hda: cs35l41: Read Speaker Calibration data from UEFI variables
On Mon, 09 May 2022 23:46:59 +0200,
Vitaly Rodionov wrote:
>
> From: Stefan Binding <sbinding@opensource.cirrus.com>
>
> Speaker Calibration data, specific to an individual speaker is
> stored inside UEFI variables during calibration, and can be
> used by the DSP.

Does this build without CONFIG_EFI?


thanks,

Takashi

> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
> Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
> ---
> sound/pci/hda/cs35l41_hda.c | 57 +++++++++++++++++++++++++++++++++++++
> sound/pci/hda/cs35l41_hda.h | 15 ++++++++++
> 2 files changed, 72 insertions(+)
>
> diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
> index 9c622104bf01..7e87b355b369 100644
> --- a/sound/pci/hda/cs35l41_hda.c
> +++ b/sound/pci/hda/cs35l41_hda.c
> @@ -22,10 +22,18 @@
> #define CS35L41_FIRMWARE_ROOT "cirrus/"
> #define CS35L41_PART "cs35l41"
> #define FW_NAME "CSPL"
> +#define CIRRUS_EFI_GUID \
> + EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3)
>
> #define HALO_STATE_DSP_CTL_NAME "HALO_STATE"
> #define HALO_STATE_DSP_CTL_TYPE 5
> #define HALO_STATE_DSP_CTL_ALG 262308
> +#define CAL_R_DSP_CTL_NAME "CAL_R"
> +#define CAL_R_DSP_CTL_TYPE 5
> +#define CAL_R_DSP_CTL_ALG 205
> +
> +static efi_char16_t efi_name[] = L"CirrusSmartAmpCalibrationData";
> +static efi_guid_t efi_guid = CIRRUS_EFI_GUID;
>
> static const struct reg_sequence cs35l41_hda_config[] = {
> { CS35L41_PLL_CLK_CTRL, 0x00000430 }, // 3072000Hz, BCLK Input, PLL_REFCLK_EN = 1
> @@ -282,6 +290,50 @@ static int cs35l41_request_firmware_files(struct cs35l41_hda *cs35l41,
> return ret;
> }
>
> +static int cs35l41_apply_calibration(struct cs35l41_hda *cs35l41)
> +{
> + const struct cs35l41_amp_efi_data *efi_data;
> + const struct cs35l41_amp_cal_data *cl;
> + unsigned long data_size = 0;
> + efi_status_t status;
> + int ret = 0;
> + u8 *data = NULL;
> + u32 attr;
> + u32 r0;
> +
> + /* Get real size of UEFI variable */
> + status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
> + if (status == EFI_BUFFER_TOO_SMALL) {
> + ret = -ENODEV;
> + /* Allocate data buffer of data_size bytes */
> + data = vmalloc(data_size);
> + if (!data)
> + return -ENOMEM;
> + /* Get variable contents into buffer */
> + status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
> + if (status == EFI_SUCCESS) {
> + efi_data = (struct cs35l41_amp_efi_data *)data;
> + dev_dbg(cs35l41->dev, "Calibration: Size=%d, Amp Count=%d\n",
> + efi_data->size, efi_data->count);
> + if (efi_data->count > cs35l41->index) {
> + cl = &efi_data->data[cs35l41->index];
> + dev_dbg(cs35l41->dev,
> + "Calibration: Ambient=%02x, Status=%02x, R0=%d\n",
> + cl->calAmbient, cl->calStatus, cl->calR);
> + r0 = cpu_to_be32(cl->calR);
> + ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_R_DSP_CTL_NAME,
> + CAL_R_DSP_CTL_TYPE, CAL_R_DSP_CTL_ALG,
> + &r0, 4);
> + if (ret)
> + dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n",
> + CAL_R_DSP_CTL_NAME, ret);
> + }
> + }
> + vfree(data);
> + }
> + return ret;
> +}
> +
> static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
> {
> const struct firmware *coeff_firmware = NULL;
> @@ -314,7 +366,12 @@ static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
>
> ret = cs_dsp_power_up(dsp, wmfw_firmware, wmfw_filename, coeff_firmware, coeff_filename,
> FW_NAME);
> + if (ret)
> + goto err_release;
> +
> + ret = cs35l41_apply_calibration(cs35l41);
>
> +err_release:
> if (wmfw_firmware)
> release_firmware(wmfw_firmware);
> if (coeff_firmware)
> diff --git a/sound/pci/hda/cs35l41_hda.h b/sound/pci/hda/cs35l41_hda.h
> index 54521a013e78..3cf9871fbed2 100644
> --- a/sound/pci/hda/cs35l41_hda.h
> +++ b/sound/pci/hda/cs35l41_hda.h
> @@ -10,6 +10,7 @@
> #ifndef __CS35L41_HDA_H__
> #define __CS35L41_HDA_H__
>
> +#include <linux/efi.h>
> #include <linux/regulator/consumer.h>
> #include <linux/gpio/consumer.h>
> #include <linux/device.h>
> @@ -18,6 +19,20 @@
> #include <linux/firmware/cirrus/cs_dsp.h>
> #include <linux/firmware/cirrus/wmfw.h>
>
> +struct cs35l41_amp_cal_data {
> + u32 calTarget[2];
> + u32 calTime[2];
> + s8 calAmbient;
> + u8 calStatus;
> + u16 calR;
> +} __packed;
> +
> +struct cs35l41_amp_efi_data {
> + u32 size;
> + u32 count;
> + struct cs35l41_amp_cal_data data[];
> +} __packed;
> +
> enum cs35l41_hda_spk_pos {
> CS35l41_LEFT,
> CS35l41_RIGHT,
> --
> 2.34.1
>

\
 
 \ /
  Last update: 2022-05-11 15:58    [W:0.287 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site