lkml.org 
[lkml]   [2022]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.17 196/225] ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines
Date
From: Eugen Hristev <eugen.hristev@microchip.com>

commit 3f7ce6d7091765ed6c67c5d78aa364b9d17e3aab upstream.

Flexcom3 is used as board console serial. There are no pull-ups on these
lines on the board. This means that if a cable is not connected (that has
pull-ups included), stray characters could appear on the console as the
floating pins voltage levels are interpreted as incoming characters.
To avoid this problem, enable the internal pull-ups on these lines.

Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220307113827.2419331-1-eugen.hristev@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/at91-sama7g5ek.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -465,7 +465,7 @@
pinctrl_flx3_default: flx3_default {
pinmux = <PIN_PD16__FLEXCOM3_IO0>,
<PIN_PD17__FLEXCOM3_IO1>;
- bias-disable;
+ bias-pull-up;
};

pinctrl_flx4_default: flx4_default {

\
 
 \ /
  Last update: 2022-05-04 19:50    [W:0.679 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site