lkml.org 
[lkml]   [2022]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.17 197/225] ARM: dts: imx8mm-venice-gw{71xx,72xx,73xx}: fix OTG controller OC mode
Date
From: Tim Harvey <tharvey@gateworks.com>

commit 4c79865f3e8a2db93ec1e844509edfebe5a6ae56 upstream.

The GW71xx, GW72xx and GW73xx boards have USB1 routed to a USB OTG
connectors and USB2 routed to a USB hub.

The OTG connector has a over-currently protection with an active-low
pin and the USB1 to HUB connection has no over-current protection (as
the HUB itself implements this for its downstream ports).

Add proper dt nodes to specify the over-current pin polarity for USB1
and disable over-current protection for USB2.

Fixes: 6f30b27c5ef5 ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits")
Cc: stable@vger.kernel.org
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi | 2 ++
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi | 2 ++
arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 2 ++
3 files changed, 6 insertions(+)

--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -103,12 +103,14 @@

&usbotg1 {
dr_mode = "otg";
+ over-current-active-low;
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};

&usbotg2 {
dr_mode = "host";
+ disable-over-current;
status = "okay";
};

--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -139,12 +139,14 @@

&usbotg1 {
dr_mode = "otg";
+ over-current-active-low;
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};

&usbotg2 {
dr_mode = "host";
+ disable-over-current;
vbus-supply = <&reg_usb_otg2_vbus>;
status = "okay";
};
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -166,12 +166,14 @@

&usbotg1 {
dr_mode = "otg";
+ over-current-active-low;
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};

&usbotg2 {
dr_mode = "host";
+ disable-over-current;
vbus-supply = <&reg_usb_otg2_vbus>;
status = "okay";
};

\
 
 \ /
  Last update: 2022-05-04 19:48    [W:0.565 / U:1.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site