lkml.org 
[lkml]   [2022]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/2] dt-bindings: net: Add ICSSG Ethernet Driver bindings
From
On 31/05/2022 11:51, Puranjay Mohan wrote:
> Add a YAML binding document for the ICSSG Programmable real time unit
> based Ethernet driver. This driver uses the PRU and PRUSS consumer APIs
> to interface the PRUs and load/run the firmware for supporting ethernet
> functionality.
>
> Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
> ---
> v1: https://lore.kernel.org/all/20220506052433.28087-2-p-mohan@ti.com/
> v1 -> v2:
> * Addressed Rob's Comments

Nope, they were not addressed.

> * It includes indentation, formatting, and other minor changes.
> ---
> .../bindings/net/ti,icssg-prueth.yaml | 181 ++++++++++++++++++
> 1 file changed, 181 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
> new file mode 100644
> index 000000000000..40af968e9178
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
> @@ -0,0 +1,181 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ti,icssg-prueth.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: |+

Missed Rob's comment.

> + Texas Instruments ICSSG PRUSS Ethernet
> +
> +maintainers:
> + - Puranjay Mohan <p-mohan@ti.com>
> +
> +description:
> + Ethernet based on the Programmable Real-Time
> + Unit and Industrial Communication Subsystem.
> +
> +allOf:
> + - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - ti,am654-icssg-prueth # for AM65x SoC family
> +
> + pinctrl-0:
> + maxItems: 1
> +
> + pinctrl-names:
> + items:
> + - const: default

You do not need these usually, they are coming from schema.

> +
> + sram:
> + description:
> + phandle to MSMC SRAM node
> +
> + dmas:
> + maxItems: 10
> + description:
> + list of phandles and specifiers to UDMA.

Please follow Rob's comment - drop description.

> +
> + dma-names:
> + items:
> + - const: tx0-0
> + - const: tx0-1
> + - const: tx0-2
> + - const: tx0-3
> + - const: tx1-0
> + - const: tx1-1
> + - const: tx1-2
> + - const: tx1-3
> + - const: rx0
> + - const: rx1
> +
> + ethernet-ports:
> + type: object
> + properties:
> + '#address-cells':
> + const: 1
> + '#size-cells':
> + const: 0
> +
> + patternProperties:
> + ^port@[0-1]$:

How did you implement Rob's comments here?

> + type: object
> + description: ICSSG PRUETH external ports
> +
> + $ref: ethernet-controller.yaml#
> +
> + unevaluatedProperties: false
> + additionalProperties: true

No one proposed to add additionalProperties:true... Does it even work?

> + properties:
> + reg:
> + items:
> + - enum: [0, 1]
> + description: ICSSG PRUETH port number
> +
> + ti,syscon-rgmii-delay:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + phandle to system controller node and register offset
> + to ICSSG control register for RGMII transmit delay
> +
> + required:
> + - reg
> +
> + ti,mii-g-rt:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: |
> + phandle to MII_G_RT module's syscon regmap.
> +
> + ti,mii-rt:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: |
> + phandle to MII_RT module's syscon regmap
> +
> + interrupts:
> + minItems: 2
> + maxItems: 2
> + description: |
> + Interrupt specifiers to TX timestamp IRQ.
> +
> + interrupt-names:
> + items:
> + - const: tx_ts0
> + - const: tx_ts1
> +
> +required:
> + - compatible
> + - sram
> + - ti,mii-g-rt
> + - dmas
> + - dma-names
> + - ethernet-ports
> + - interrupts
> + - interrupt-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> +
> + /* Example k3-am654 base board SR2.0, dual-emac */
> + pruss2_eth: pruss2_eth {
> + compatible = "ti,am654-icssg-prueth";

Again missed Rob's comment.

Really, you ignored four of his comments. Please respect reviewers time
but not forcing them to repeat same review comments.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-05-31 12:09    [W:0.904 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site