Messages in this thread | | | From | Rahul T R <> | Subject | [PATCH v3 0/3] Enable RPi header on j721e sk | Date | Mon, 30 May 2022 15:30:57 +0530 |
| |
The following series of patches enables RPi header on j721e sk. It is a 40 pin io expasion header which brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1
v3: - Change node name from clock to clock-controller - Add correct description for clock-controller node
v2: - Add full path for clock property $ref - Remove the discription for clock pattern property, since $ref is added - Remove the label in the example - Fix the indentation in the example
Rahul T R (1): dt-bindings: mfd: ti,j721e-system-controller: Add clock property
Sinthu Raja (1): arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header
Vijay Pothukuchi (1): arm64: dts: ti: k3-j721e-*: Add dts nodes for EHRPWMs
.../mfd/ti,j721e-system-controller.yaml | 12 +++ .../dts/ti/k3-j721e-common-proc-board.dts | 24 +++++ arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 62 ++++++++++- arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 101 +++++++++++++++++- 4 files changed, 193 insertions(+), 6 deletions(-)
-- 2.17.1
| |