lkml.org 
[lkml]   [2022]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] dt-bindings: iio: sx9324: Add CS idle/sleep mode
Quoting Rob Herring (2022-05-03 07:18:44)
> On Mon, May 02, 2022 at 05:41:55PM -0700, Stephen Boyd wrote:
> > We need to configure the sleep and idle mode of the CS pins for this
> > device. Add a DT property to do this so pins are in a proper state
> > during sleep (either hi-z, grounded, or pulled up to vdd).
> >
> > Cc: Gwendal Grignou <gwendal@chromium.org>
> > Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> > ---
> > .../devicetree/bindings/iio/proximity/semtech,sx9324.yaml | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
> > index d265eb5258c8..6cec3481c8b2 100644
> > --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
> > +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
> > @@ -126,6 +126,14 @@ properties:
> > UINT_MAX (4294967295) represents infinite. Other values
> > represent 1-1/N.
> >
> > + semtech,cs-idle-sleep:
> > + description:
> > + State of CS pins during sleep mode and idle time.
> > + enum:
> > + - hz
>
> I was trying to figure out how Hertz was a pin state. 'hiz' or 'hi-z'
> instead?

Sure. I was following the datasheet that has "HZ" but hi-z is better.

\
 
 \ /
  Last update: 2022-05-03 21:13    [W:0.447 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site