Messages in this thread | | | Date | Tue, 3 May 2022 09:18:44 -0500 | From | Rob Herring <> | Subject | Re: [PATCH 1/2] dt-bindings: iio: sx9324: Add CS idle/sleep mode |
| |
On Mon, May 02, 2022 at 05:41:55PM -0700, Stephen Boyd wrote: > We need to configure the sleep and idle mode of the CS pins for this > device. Add a DT property to do this so pins are in a proper state > during sleep (either hi-z, grounded, or pulled up to vdd). > > Cc: Gwendal Grignou <gwendal@chromium.org> > Signed-off-by: Stephen Boyd <swboyd@chromium.org> > --- > .../devicetree/bindings/iio/proximity/semtech,sx9324.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml > index d265eb5258c8..6cec3481c8b2 100644 > --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml > +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml > @@ -126,6 +126,14 @@ properties: > UINT_MAX (4294967295) represents infinite. Other values > represent 1-1/N. > > + semtech,cs-idle-sleep: > + description: > + State of CS pins during sleep mode and idle time. > + enum: > + - hz
I was trying to figure out how Hertz was a pin state. 'hiz' or 'hi-z' instead?
> + - gnd > + - vdd > + > semtech,int-comp-resistor: > description: > Internal resistor setting for compensation. > -- > https://chromeos.dev > >
| |