lkml.org 
[lkml]   [2022]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: input: use generic node names
Date
Devicetree specification expects nodes to have generic names, if
possible, so replace custom ones with something generic. For gpio-keys,
the more popular format is "key-xxx" instead of "xxx-key", so choose the
first one.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Cc: Andreas Kemnade <andreas@kemnade.info>
---
.../devicetree/bindings/input/fsl,mpr121-touchkey.yaml | 4 ++--
Documentation/devicetree/bindings/input/gpio-keys.yaml | 4 ++--
Documentation/devicetree/bindings/input/iqs269a.yaml | 2 +-
Documentation/devicetree/bindings/input/iqs626a.yaml | 2 +-
.../devicetree/bindings/input/microchip,cap11xx.yaml | 2 +-
5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
index 878464f128dc..5139af287d3e 100644
--- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
+++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
@@ -57,7 +57,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;

- mpr121@5a {
+ touchkey@5a {
compatible = "fsl,mpr121-touchkey";
reg = <0x5a>;
interrupt-parent = <&gpio1>;
@@ -77,7 +77,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;

- mpr121@5a {
+ touchkey@5a {
compatible = "fsl,mpr121-touchkey";
reg = <0x5a>;
poll-interval = <20>;
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
index 7fe1966ea28a..93f601c58984 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -127,13 +127,13 @@ examples:
compatible = "gpio-keys";
autorepeat;

- up {
+ key-up {
label = "GPIO Key UP";
linux,code = <103>;
gpios = <&gpio1 0 1>;
};

- down {
+ key-down {
label = "GPIO Key DOWN";
linux,code = <108>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml
index 9c154e5e1a91..d84d69f5455d 100644
--- a/Documentation/devicetree/bindings/input/iqs269a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs269a.yaml
@@ -475,7 +475,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;

- iqs269a@44 {
+ touch@44 {
#address-cells = <1>;
#size-cells = <0>;

diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml
index 0cb736c541c9..dd727befe564 100644
--- a/Documentation/devicetree/bindings/input/iqs626a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs626a.yaml
@@ -751,7 +751,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;

- iqs626a@44 {
+ touch@44 {
#address-cells = <1>;
#size-cells = <0>;

diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
index d5d6bced3148..96358b12f9b2 100644
--- a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
+++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
@@ -112,7 +112,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;

- cap1188@28 {
+ touch@28 {
compatible = "microchip,cap1188";
interrupt-parent = <&gpio1>;
interrupts = <0 0>;
--
2.34.1
\
 
 \ /
  Last update: 2022-05-24 11:32    [W:0.653 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site