lkml.org 
[lkml]   [2022]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] Documentation: admin-guide: pm: Add Out of Band mode
Date
Update documentation for using the tool to support performance level
change via OOB (Out of Band) interface.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
v2:
As suggested by Jonathan
- Indent literal block
- Show output of command

.../admin-guide/pm/intel-speed-select.rst | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)

diff --git a/Documentation/admin-guide/pm/intel-speed-select.rst b/Documentation/admin-guide/pm/intel-speed-select.rst
index 0a1fbdb54bfe..a2bfb971654f 100644
--- a/Documentation/admin-guide/pm/intel-speed-select.rst
+++ b/Documentation/admin-guide/pm/intel-speed-select.rst
@@ -262,6 +262,28 @@ Which shows that the base frequency now increased from 2600 MHz at performance
level 0 to 2800 MHz at performance level 4. As a result, any workload, which can
use fewer CPUs, can see a boost of 200 MHz compared to performance level 0.

+Changing performance level via BMC Interface
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+It is possible to change SST-PP level using out of band (OOB) agent (Via some
+remote management console, through BMC "Baseboard Management Controller"
+interface). This mode is supported from the Sapphire Rapids processor
+generation. The kernel and tool change to support this mode is added to Linux
+kernel version 5.18. To enable this feature, kernel config
+"CONFIG_INTEL_HFI_THERMAL" is required. The minimum version of the tool
+is "v1.12" to support this feature, which is part of Linux kernel version 5.18.
+
+To support such configuration, this tool can be used as a daemon. Add
+a command line option --oob::
+
+ # intel-speed-select --oob
+ Intel(R) Speed Select Technology
+ Executing on CPU model:143[0x8f]
+ OOB mode is enabled and will run as daemon
+
+In this mode the tool will online/offline CPUs based on the new performance
+level.
+
Check presence of other Intel(R) SST features
---------------------------------------------

--
2.35.1
\
 
 \ /
  Last update: 2022-05-23 20:53    [W:0.037 / U:0.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site