lkml.org 
[lkml]   [2022]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] gpio: gpio-vf610: do not touch other bits when set the target bit
On Wed, May 11, 2022 at 4:27 AM <haibo.chen@nxp.com> wrote:
>
> From: Haibo Chen <haibo.chen@nxp.com>
>
> For gpio controller contain register PDDR, when set one target bit,
> current logic will clear all other bits, this is wrong. Use operator
> '|=' to fix it.
>
> Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support")
> Reviewed-by: Peng Fan <peng.fan@nxp.com>
> Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
> ---
> drivers/gpio/gpio-vf610.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
> index 20780c35da1b..23cddb265a0d 100644
> --- a/drivers/gpio/gpio-vf610.c
> +++ b/drivers/gpio/gpio-vf610.c
> @@ -125,9 +125,13 @@ static int vf610_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
> {
> struct vf610_gpio_port *port = gpiochip_get_data(chip);
> unsigned long mask = BIT(gpio);
> + u32 val;
>
> - if (port->sdata && port->sdata->have_paddr)
> - vf610_gpio_writel(mask, port->gpio_base + GPIO_PDDR);
> + if (port->sdata && port->sdata->have_paddr) {
> + val = vf610_gpio_readl(port->gpio_base + GPIO_PDDR);
> + val |= mask;
> + vf610_gpio_writel(val, port->gpio_base + GPIO_PDDR);
> + }
>
> vf610_gpio_set(chip, gpio, value);
>
> --
> 2.25.1
>

Applied, thanks!

Bart

\
 
 \ /
  Last update: 2022-05-13 21:54    [W:0.120 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site