lkml.org 
[lkml]   [2022]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] gpio: gpio-vf610: do not touch other bits when set the target bit
Date
From: Haibo Chen <haibo.chen@nxp.com>

For gpio controller contain register PDDR, when set one target bit,
current logic will clear all other bits, this is wrong. Use operator
'|=' to fix it.

Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
---
drivers/gpio/gpio-vf610.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index 20780c35da1b..23cddb265a0d 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -125,9 +125,13 @@ static int vf610_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
{
struct vf610_gpio_port *port = gpiochip_get_data(chip);
unsigned long mask = BIT(gpio);
+ u32 val;

- if (port->sdata && port->sdata->have_paddr)
- vf610_gpio_writel(mask, port->gpio_base + GPIO_PDDR);
+ if (port->sdata && port->sdata->have_paddr) {
+ val = vf610_gpio_readl(port->gpio_base + GPIO_PDDR);
+ val |= mask;
+ vf610_gpio_writel(val, port->gpio_base + GPIO_PDDR);
+ }

vf610_gpio_set(chip, gpio, value);

--
2.25.1
\
 
 \ /
  Last update: 2022-05-11 04:28    [W:0.029 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site