lkml.org 
[lkml]   [2022]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 19/34] KVM: nVMX: hyper-v: Enable L2 TLB flush
From
Date
On Thu, 2022-04-14 at 15:19 +0200, Vitaly Kuznetsov wrote:
> Enable L2 TLB flush feature on nVMX when:
> - Enlightened VMCS is in use.
> - The feature flag is enabled in eVMCS.
> - The feature flag is enabled in partition assist page.
>
> Perform synthetic vmexit to L1 after processing TLB flush call upon
> request (HV_VMX_SYNTHETIC_EXIT_REASON_TRAP_AFTER_FLUSH).
>
> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
> ---
> arch/x86/kvm/vmx/evmcs.c | 20 ++++++++++++++++++++
> arch/x86/kvm/vmx/evmcs.h | 10 ++++++++++
> arch/x86/kvm/vmx/nested.c | 16 ++++++++++++++++
> 3 files changed, 46 insertions(+)
>
> diff --git a/arch/x86/kvm/vmx/evmcs.c b/arch/x86/kvm/vmx/evmcs.c
> index e390e67496df..e0cb2e223daa 100644
> --- a/arch/x86/kvm/vmx/evmcs.c
> +++ b/arch/x86/kvm/vmx/evmcs.c
> @@ -6,6 +6,7 @@
> #include "../hyperv.h"
> #include "../cpuid.h"
> #include "evmcs.h"
> +#include "nested.h"
> #include "vmcs.h"
> #include "vmx.h"
> #include "trace.h"
> @@ -438,6 +439,25 @@ int nested_enable_evmcs(struct kvm_vcpu *vcpu,
> return 0;
> }
>
> +bool nested_evmcs_l2_tlb_flush_enabled(struct kvm_vcpu *vcpu)
> +{
> + struct vcpu_vmx *vmx = to_vmx(vcpu);
> + struct hv_enlightened_vmcs *evmcs = vmx->nested.hv_evmcs;
> + struct hv_vp_assist_page assist_page;
> +
> + if (!evmcs)
> + return false;
> +
> + if (!evmcs->hv_enlightenments_control.nested_flush_hypercall)
> + return false;
> +
> + if (unlikely(!kvm_hv_get_assist_page(vcpu, &assist_page)))
> + return false;
> +
> + return assist_page.nested_control.features.directhypercall;
> +}
> +
> void vmx_post_hv_l2_tlb_flush(struct kvm_vcpu *vcpu)
> {
> + nested_vmx_vmexit(vcpu, HV_VMX_SYNTHETIC_EXIT_REASON_TRAP_AFTER_FLUSH, 0, 0);
> }
> diff --git a/arch/x86/kvm/vmx/evmcs.h b/arch/x86/kvm/vmx/evmcs.h
> index b120b0ead4f3..ddbdb557cc53 100644
> --- a/arch/x86/kvm/vmx/evmcs.h
> +++ b/arch/x86/kvm/vmx/evmcs.h
> @@ -65,6 +65,15 @@ DECLARE_STATIC_KEY_FALSE(enable_evmcs);
> #define EVMCS1_UNSUPPORTED_VMENTRY_CTRL (VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL)
> #define EVMCS1_UNSUPPORTED_VMFUNC (VMX_VMFUNC_EPTP_SWITCHING)
>
> +/*
> + * Note, Hyper-V isn't actually stealing bit 28 from Intel, just abusing it by
> + * pairing it with architecturally impossible exit reasons. Bit 28 is set only
> + * on SMI exits to a SMI transfer monitor (STM) and if and only if a MTF VM-Exit
> + * is pending. I.e. it will never be set by hardware for non-SMI exits (there
> + * are only three), nor will it ever be set unless the VMM is an STM.

I am sure that this will backfire this way or another. Their fault though...


I also wonder why they need that synthetic VM exit, it's in the spec,
but why I don't fully understand. Their fault as well though.

The flag that controls it is 'TlbLockCount', I wonder what it means...

> + */
> +#define HV_VMX_SYNTHETIC_EXIT_REASON_TRAP_AFTER_FLUSH 0x10000031
> +
> struct evmcs_field {
> u16 offset;
> u16 clean_field;
> @@ -244,6 +253,7 @@ int nested_enable_evmcs(struct kvm_vcpu *vcpu,
> uint16_t *vmcs_version);
> void nested_evmcs_filter_control_msr(u32 msr_index, u64 *pdata);
> int nested_evmcs_check_controls(struct vmcs12 *vmcs12);
> +bool nested_evmcs_l2_tlb_flush_enabled(struct kvm_vcpu *vcpu);
> void vmx_post_hv_l2_tlb_flush(struct kvm_vcpu *vcpu);
>
> #endif /* __KVM_X86_VMX_EVMCS_H */
> diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
> index cc6c944b5815..3e2ef5edad4a 100644
> --- a/arch/x86/kvm/vmx/nested.c
> +++ b/arch/x86/kvm/vmx/nested.c
> @@ -1170,6 +1170,17 @@ static void nested_vmx_transition_tlb_flush(struct kvm_vcpu *vcpu,
> {
> struct vcpu_vmx *vmx = to_vmx(vcpu);
>
> + /*
> + * KVM_REQ_HV_TLB_FLUSH flushes entries from either L1's VP_ID or
> + * L2's VP_ID upon request from the guest. Make sure we check for
> + * pending entries for the case when the request got misplaced (e.g.
> + * a transition from L2->L1 happened while processing L2 TLB flush
> + * request or vice versa). kvm_hv_vcpu_flush_tlb() will not flush
> + * anything if there are no requests in the corresponding buffer.
> + */
> + if (to_hv_vcpu(vcpu))
> + kvm_make_request(KVM_REQ_HV_TLB_FLUSH, vcpu);
> +
> /*
> * If vmcs12 doesn't use VPID, L1 expects linear and combined mappings
> * for *all* contexts to be flushed on VM-Enter/VM-Exit, i.e. it's a
> @@ -5997,6 +6008,11 @@ static bool nested_vmx_l0_wants_exit(struct kvm_vcpu *vcpu,
> * Handle L2's bus locks in L0 directly.
> */
> return true;
> + case EXIT_REASON_VMCALL:
> + /* Hyper-V L2 TLB flush hypercall is handled by L0 */
> + return kvm_hv_l2_tlb_flush_exposed(vcpu) &&
> + nested_evmcs_l2_tlb_flush_enabled(vcpu) &&
> + kvm_hv_is_tlb_flush_hcall(vcpu);
> default:
> break;
> }



Looks good,

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>

Best regards,
Maxim Levitsky

\
 
 \ /
  Last update: 2022-05-11 13:33    [W:0.835 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site