lkml.org 
[lkml]   [2022]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] gpio: pca953x: update irq_stat even when irq is not enabled (irq_mask not set).
Date
From: Puyou Lu <lupuyou@aifrutech.com>

When one port's input state get inverted (eg. from low to hight) after
pca953x_irq_setup but before setting irq_mask (by some other driver such as
"gpio-keys"), the next inversion of this port (eg. from hight to low) will not
triggered any more (because irq_stat is not updated at the first time). Issue
should be fixed after this commit.

Signed-off-by: Puyou Lu <puyou.lu@gmail.com>
---
drivers/gpio/gpio-pca953x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index d2fe76f3f34f..8726921a1129 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -762,11 +762,11 @@ static bool pca953x_irq_pending(struct pca953x_chip *chip, unsigned long *pendin
bitmap_xor(cur_stat, new_stat, old_stat, gc->ngpio);
bitmap_and(trigger, cur_stat, chip->irq_mask, gc->ngpio);

+ bitmap_copy(chip->irq_stat, new_stat, gc->ngpio);
+
if (bitmap_empty(trigger, gc->ngpio))
return false;

- bitmap_copy(chip->irq_stat, new_stat, gc->ngpio);
-
bitmap_and(cur_stat, chip->irq_trig_fall, old_stat, gc->ngpio);
bitmap_and(old_stat, chip->irq_trig_raise, new_stat, gc->ngpio);
bitmap_or(new_stat, old_stat, cur_stat, gc->ngpio);
--
2.17.1
\
 
 \ /
  Last update: 2022-05-01 11:23    [W:0.045 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site