lkml.org 
[lkml]   [2022]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] Make AUX gpio pin optional for ktd2692
Date
Some appliances of ktd2692 don't have the AUX pin connected to
a GPIO. Specifically, Samsung Galaxy J5 (2015), which uses ktd2692
for driving the front flash LED, has the pin not connected anywhere on
schematics. Make specifying the AUX pin optional, since it is additional
functionality and only affects amount of current going through the LED.

Also convert the txt device-tree bindings to yaml and pick up maintainership
over the yaml binding and the driver itself.

v2:
- fix the dt_binding_check
v3:
- set the aux_gpio to NULL to avoid passing ERR_PTR as a gpio

Markuss Broks (2):
dt-bindings: leds: convert ktd2692 bindings to yaml
leds: ktd2692: Make aux-gpios optional

.../bindings/leds/kinetic,ktd2692.yaml | 87 +++++++++++++++++++
.../devicetree/bindings/leds/leds-ktd2692.txt | 50 -----------
MAINTAINERS | 6 ++
drivers/leds/flash/leds-ktd2692.c | 18 ++--
4 files changed, 103 insertions(+), 58 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
delete mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt

--
2.35.1

\
 
 \ /
  Last update: 2022-04-07 17:32    [W:0.040 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site