lkml.org 
[lkml]   [2022]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 14/14] mm: multi-gen LRU: design doc
Hi Zhao Yu,
On Wed, Apr 06, 2022 at 09:15:26PM -0600, Yu Zhao wrote:
> [EXTERNAL EMAIL NOTICE: This email originated from an external sender. Please be mindful of safe email handling and proprietary information protection practices.]
>
>
> Add a design doc.
>
> Signed-off-by: Yu Zhao <yuzhao@google.com>
> Acked-by: Brian Geffon <bgeffon@google.com>
> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
> Acked-by: Steven Barrett <steven@liquorix.net>
> Acked-by: Suleiman Souhlal <suleiman@google.com>
> Tested-by: Daniel Byrne <djbyrne@mtu.edu>
> Tested-by: Donald Carr <d@chaos-reins.com>
> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
> Tested-by: Sofia Trinh <sofia.trinh@edi.works>
> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
> ---
> Documentation/vm/index.rst | 1 +
> Documentation/vm/multigen_lru.rst | 160 ++++++++++++++++++++++++++++++
> 2 files changed, 161 insertions(+)
> create mode 100644 Documentation/vm/multigen_lru.rst
>
> diff --git a/Documentation/vm/index.rst b/Documentation/vm/index.rst
> index 44365c4574a3..b48434300226 100644
> --- a/Documentation/vm/index.rst
> +++ b/Documentation/vm/index.rst
> @@ -25,6 +25,7 @@ algorithms. If you are looking for advice on simply allocating memory, see the
> ksm
> memory-model
> mmu_notifier
> + multigen_lru
> numa
> overcommit-accounting
> page_migration
> diff --git a/Documentation/vm/multigen_lru.rst b/Documentation/vm/multigen_lru.rst
> new file mode 100644
> index 000000000000..9b29b87e1435
> --- /dev/null
> +++ b/Documentation/vm/multigen_lru.rst
> @@ -0,0 +1,160 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +=============
> +Multi-Gen LRU
> +=============
> +The multi-gen LRU is an alternative LRU implementation that optimizes
> +page reclaim and improves performance under memory pressure. Page
> +reclaim decides the kernel's caching policy and ability to overcommit
> +memory. It directly impacts the kswapd CPU usage and RAM efficiency.
> +
> +Design overview
> +===============
> +Objectives
> +----------
> +The design objectives are:
> +
> +* Good representation of access recency
> +* Try to profit from spatial locality
> +* Fast paths to make obvious choices
> +* Simple self-correcting heuristics
> +
> +The representation of access recency is at the core of all LRU
> +implementations. In the multi-gen LRU, each generation represents a
> +group of pages with similar access recency. Generations establish a
> +common frame of reference and therefore help make better choices,
> +e.g., between different memcgs on a computer or different computers in
> +a data center (for job scheduling).
> +
> +Exploiting spatial locality improves efficiency when gathering the
> +accessed bit. A rmap walk targets a single page and does not try to
> +profit from discovering a young PTE. A page table walk can sweep all
> +the young PTEs in an address space, but the address space can be too
> +large to make a profit. The key is to optimize both methods and use
> +them in combination.
> +
> +Fast paths reduce code complexity and runtime overhead. Unmapped pages
> +do not require TLB flushes; clean pages do not require writeback.
> +These facts are only helpful when other conditions, e.g., access
> +recency, are similar. With generations as a common frame of reference,
> +additional factors stand out. But obvious choices might not be good
> +choices; thus self-correction is required.
> +
> +The benefits of simple self-correcting heuristics are self-evident.
> +Again, with generations as a common frame of reference, this becomes
> +attainable. Specifically, pages in the same generation can be
> +categorized based on additional factors, and a feedback loop can
> +statistically compare the refault percentages across those categories
> +and infer which of them are better choices.
It is better if we add a picture here to show the overview..

> +
> +Assumptions
> +-----------
> +The protection of hot pages and the selection of cold pages are based
> +on page access channels and patterns. There are two access channels:
> +
> +* Accesses through page tables
> +* Accesses through file descriptors
> +
> +The protection of the former channel is by design stronger because:
> +
> +1. The uncertainty in determining the access patterns of the former
> + channel is higher due to the approximation of the accessed bit.
> +2. The cost of evicting the former channel is higher due to the TLB
> + flushes required and the likelihood of encountering the dirty bit.
> +3. The penalty of underprotecting the former channel is higher because
> + applications usually do not prepare themselves for major page
> + faults like they do for blocked I/O. E.g., GUI applications
> + commonly use dedicated I/O threads to avoid blocking the rendering
> + threads.
> +
> +There are also two access patterns:
> +
> +* Accesses exhibiting temporal locality
> +* Accesses not exhibiting temporal locality
> +
> +For the reasons listed above, the former channel is assumed to follow
> +the former pattern unless ``VM_SEQ_READ`` or ``VM_RAND_READ`` is
> +present, and the latter channel is assumed to follow the latter
> +pattern unless outlying refaults have been observed.
> +
> +Workflow overview
> +=================
> +Evictable pages are divided into multiple generations for each
> +``lruvec``. The youngest generation number is stored in
> +``lrugen->max_seq`` for both anon and file types as they are aged on
> +an equal footing. The oldest generation numbers are stored in
> +``lrugen->min_seq[]`` separately for anon and file types as clean file
> +pages can be evicted regardless of swap constraints. These three
> +variables are monotonically increasing.
> +
> +Generation numbers are truncated into ``order_base_2(MAX_NR_GENS+1)``
> +bits in order to fit into the gen counter in ``folio->flags``. Each
> +truncated generation number is an index to ``lrugen->lists[]``. The
> +sliding window technique is used to track at least ``MIN_NR_GENS`` and
> +at most ``MAX_NR_GENS`` generations. The gen counter stores a value
> +within ``[1, MAX_NR_GENS]`` while a page is on one of
> +``lrugen->lists[]``; otherwise it stores zero.
> +
> +Each generation is divided into multiple tiers. Tiers represent
> +different ranges of numbers of accesses through file descriptors. A
> +page accessed ``N`` times through file descriptors is in tier
> +``order_base_2(N)``. In contrast to moving across generations, which
> +requires the LRU lock, moving across tiers only requires operations on
> +``folio->flags`` and therefore has a negligible cost. A feedback loop
> +modeled after the PID controller monitors refaults over all the tiers
> +from anon and file types and decides which tiers from which types to
> +evict or protect.
> +
> +There are two conceptually independent procedures: the aging and the
> +eviction. They form a closed-loop system, i.e., the page reclaim.

ditto.

> +
> +Aging
> +-----
> +The aging produces young generations. Given an ``lruvec``, it
> +increments ``max_seq`` when ``max_seq-min_seq+1`` approaches
> +``MIN_NR_GENS``. The aging promotes hot pages to the youngest
> +generation when it finds them accessed through page tables; the
> +demotion of cold pages happens consequently when it increments
> +``max_seq``. The aging uses page table walks and rmap walks to find
> +young PTEs. For the former, it iterates ``lruvec_memcg()->mm_list``
> +and calls ``walk_page_range()`` with each ``mm_struct`` on this list
> +to scan PTEs. On finding a young PTE, it clears the accessed bit and
> +updates the gen counter of the page mapped by this PTE to
> +``(max_seq%MAX_NR_GENS)+1``. After each iteration of this list, it
> +increments ``max_seq``. For the latter, when the eviction walks the
> +rmap and finds a young PTE, the aging scans the adjacent PTEs and
> +follows the same steps just described.
> +
> +Eviction
> +--------
> +The eviction consumes old generations. Given an ``lruvec``, it
> +increments ``min_seq`` when ``lrugen->lists[]`` indexed by
> +``min_seq%MAX_NR_GENS`` becomes empty. To select a type and a tier to
> +evict from, it first compares ``min_seq[]`` to select the older type.
> +If both types are equally old, it selects the one whose first tier has
> +a lower refault percentage. The first tier contains single-use
> +unmapped clean pages, which are the best bet. The eviction sorts a
> +page according to the gen counter if the aging has found this page
> +accessed through page tables and updated the gen counter. It also
> +moves a page to the next generation, i.e., ``min_seq+1``, if this page
> +was accessed multiple times through file descriptors and the feedback
> +loop has detected outlying refaults from the tier this page is in. To
> +do this, the feedback loop uses the first tier as the baseline, for
> +the reason stated earlier.
> +

Thanks
Huang Shijie

\
 
 \ /
  Last update: 2022-04-07 17:29    [W:1.098 / U:1.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site