lkml.org 
[lkml]   [2022]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] clk: bcm2835: Round UART input clock up
Date
The UART clock is initialised to be as close to the requested
frequency as possible without exceeding it. Now that there is a
clock manager that returns the actual frequencies, an expected
48MHz clock is reported as 47999625. If the requested baudrate
== requested clock/16, there is no headroom and the slight
reduction in actual clock rate results in failure.

If increasing a clock by less than 0.1% changes it from ..999..
to ..000.., round it up.

This is reworked version of a downstream fix:
https://github.com/raspberrypi/linux/commit/ab3f1b39537f6d3825b8873006fbe2fc5ff057b7

Cc: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
---
Changes since v1
Make bcm2835_clock_round() static to fix following warning
when compiling for riscv:
drivers/clk/bcm/clk-bcm2835.c:997:15: warning: no previous prototype for 'bcm2835_clock_round' [-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>

drivers/clk/bcm/clk-bcm2835.c | 30 ++++++++++++++++++++++++++++--
1 file changed, 28 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 3ad20e75fd23..c29b643d1bf5 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -502,6 +502,8 @@ struct bcm2835_clock_data {
bool low_jitter;

u32 tcnt_mux;
+
+ bool round_up;
};

struct bcm2835_gate_data {
@@ -992,12 +994,30 @@ static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
return temp;
}

+static unsigned long bcm2835_clock_round(unsigned long clk)
+{
+ unsigned long scaler;
+
+ /*
+ * If increasing a clock by less than 0.1% changes it
+ * from ..999.. to ..000.., round up.
+ */
+ scaler = 1;
+ while (scaler * 100000 < clk)
+ scaler *= 10;
+ if ((clk + scaler - 1) / scaler % 1000 == 0)
+ clk = (clk / scaler + 1) * scaler;
+
+ return clk;
+}
+
static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
struct bcm2835_cprman *cprman = clock->cprman;
const struct bcm2835_clock_data *data = clock->data;
+ unsigned long rate;
u32 div;

if (data->int_bits == 0 && data->frac_bits == 0)
@@ -1005,7 +1025,12 @@ static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,

div = cprman_read(cprman, data->div_reg);

- return bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
+ rate = bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
+
+ if (data->round_up)
+ rate = bcm2835_clock_round(rate);
+
+ return rate;
}

static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock)
@@ -2142,7 +2167,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
.div_reg = CM_UARTDIV,
.int_bits = 10,
.frac_bits = 12,
- .tcnt_mux = 28),
+ .tcnt_mux = 28,
+ .round_up = true),

/* TV encoder clock. Only operating frequency is 108Mhz. */
[BCM2835_CLOCK_VEC] = REGISTER_PER_CLK(
--
2.26.2
\
 
 \ /
  Last update: 2022-04-04 14:52    [W:2.016 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site