lkml.org 
[lkml]   [2022]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v14 03/10] mfd: qcom-spmi-pmic: read fab id on supported PMICs
Date
The PMI8998 and PM660 expose the fab_id, this is needed by drivers like
the RRADC to calibrate ADC values.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/mfd/qcom-spmi-pmic.c | 7 +++++++
include/soc/qcom/qcom-spmi-pmic.h | 1 +
2 files changed, 8 insertions(+)

diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c
index 5403306b1863..4e8b34554814 100644
--- a/drivers/mfd/qcom-spmi-pmic.c
+++ b/drivers/mfd/qcom-spmi-pmic.c
@@ -19,6 +19,7 @@
#define PMIC_REV4 0x103
#define PMIC_TYPE 0x104
#define PMIC_SUBTYPE 0x105
+#define PMIC_FAB_ID 0x1f2

#define PMIC_TYPE_VALUE 0x51

@@ -157,6 +158,12 @@ static int pmic_spmi_load_revid(struct regmap *map, struct device *dev,
if (ret < 0)
return ret;

+ if (pmic->subtype == PMI8998_SUBTYPE || pmic->subtype == PM660_SUBTYPE) {
+ ret = regmap_read(map, PMIC_FAB_ID, &pmic->fab_id);
+ if (ret < 0)
+ return ret;
+ }
+
/*
* In early versions of PM8941 and PM8226, the major revision number
* started incrementing from 0 (eg 0 = v1.0, 1 = v2.0).
diff --git a/include/soc/qcom/qcom-spmi-pmic.h b/include/soc/qcom/qcom-spmi-pmic.h
index 440e94235bfc..a2c9ac22c230 100644
--- a/include/soc/qcom/qcom-spmi-pmic.h
+++ b/include/soc/qcom/qcom-spmi-pmic.h
@@ -52,6 +52,7 @@ struct qcom_spmi_pmic {
unsigned int major;
unsigned int minor;
unsigned int rev2;
+ unsigned int fab_id;
const char *name;
};

--
2.36.0
\
 
 \ /
  Last update: 2022-04-30 00:13    [W:0.191 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site