lkml.org 
[lkml]   [2022]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v14 00/10] iio: adc: introduce Qualcomm SPMI Round Robin ADC
From


On 18/06/2022 14:17, Jonathan Cameron wrote:
> On Sat, 18 Jun 2022 14:09:13 +0100
> Jonathan Cameron <jic23@kernel.org> wrote:
>
>> On Fri, 29 Apr 2022 23:08:55 +0100
>> Caleb Connolly <caleb.connolly@linaro.org> wrote:
>>
>>> The RRADC is responsible for reading data about the current and
>>> voltage from the USB or DC in jacks, it can also read the battery
>>> ID (resistence) and some temperatures. It is found on the PMI8998 and
>>> PM660 Qualcomm PMICs.
>>>
>>> The RRADC has to calibrate some ADC values based on which chip fab
>>> the PMIC was produced in, to facilitate this the patches
>>> ("mfd: qcom-spmi-pmic: expose the PMIC revid information to clients")
>>> and ("mfd: qcom-spmi-pmic: read fab id on supported PMICs")
>>> expose the PMIC revision information and fab_id as a struct and register
>>> them as driver data in the Qualcomm SPMI PMIC driver so that it can be
>>> read by the RRADC.
>>>
>>> The first 3 patches add support for looking up an SPMI device from a
>>> struct device_node, as well as introducing support for looking up the
>>> base USID of a Qcom PMIC, see patch comments for more details. These
>>> Address Bjorns comments on v2.
>>
>> Hi Caleb / All
>>
>> Rather than waste time going for a v15 for the 3 minor issues in reviews
>> I've just fixed them up whilst applying.
>>
>> As spmi or mfd maintainers may want an immutable branch I've
>> just pushed one out at
>> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git immutable-qcom-spmi-rradc
>> that has the first 5 patches. I assume the dts changes will go via qcom -> arm-soc
>> as normal.
>>
>> 0-day should run on that branch shortly but I'll be optimistic and pull it
>> into my testing branch in the meantime (mostly so I don't forget about it and
>> can mark it applied in patchwork :)
>
> Gah. Merge into IIO doesn't build because of dropping of.h from includes
> in iio.h. This driver should directly include property.h directly.
>
> New 'immutable' branch with same name pushed out. Guessing no one picked
> it up in the minute or so previous version was available for!
>
> I'd advise that Lee / Stephen don't merge this for a few days at least so
> any other issues have become visible and I can fix them up without making
> for complex history.
Hi Jonathan,

Thanks so much for picking this up and fixing those last few issues. And
thanks for all your help with this series, I really appreciate the time
you've taken to help me get this to a mergeable state and teach me about
IIO.

You've really made my week with this :)

Kind Regards,
Caleb
>
> Thanks,
>
> Jonathan
>
>>
>> Thanks,
>>
>> Jonathan
>>
>>
>>>
>>> Changes since v13:
>>> * Address Lee Jones' feedback on the SPMI patches.
>>> * Pick up Jami's patch to enable the RRADC on the OnePlus 5
>>>
>>> Changes since v12:
>>> * Apply Krzysztof's suggestions to rradc DT binding docs.
>>>
>>> Changes since v11:
>>> * Remove debug logging which was left in ("mfd: qcom-spmi-pmic: expose the PMIC revid information to clients")
>>> * Picked up Dmitry's Tested-by and Reviewed-by tags.
>>>
>>> Changes since v10:
>>> * Don't inline spmi_device_from_of()
>>>
>>> Changes since v9:
>>> * Add back missing copyright, this driver is originally derived from
>>> downstream (Thanks Manivannan).
>>>
>>> Changes since v8:
>>> * Drop Reported-by for the bugfix on previous revision reported by LKP
>>> * Apply Jonathans suggestions
>>> * Rework patch 2 ("expose the PMIC revid information to clients") to
>>> handle PMICs with a single USID (thanks Dmitry)
>>>
>>> Changes since v7:
>>> * Addressed Jonathans comments
>>> * Fixed bug reported by LKP
>>>
>>> Changes since v6:
>>> * Fix printf format warning in rradc
>>>
>>> Changes since v5:
>>> * Add missing EXPORT_SYMBOL_GPL() to
>>> ("spmi: add a helper to look up an SPMI device from a device node")
>>>
>>> Changes since v4:
>>> * Addressed Jonathan's comments on v4
>>> * Reworked the qcom-spmi-pmic patches to properly walk the devicetree
>>> to find the base USID. I've tested this on SDM845 which has two PMICs
>>> (pm8998 and pmi8998) and I'm able to look up the PMIC revid from all
>>> 4 USIDs.
>>>
>>> Changes since v3:
>>> * Split PMIC patch in two, rework to support function drivers on a
>>> sibling USID
>>> * Completely rework RRADC driver to make use of the modern IIO
>>> framework. This required re-arranging a lot of the equations and
>>> results in some lost precision, where relevant I've left comments to
>>> explain this. I don't think any of it is significant enough to
>>> justify doing post-processing in driver.
>>> Thanks a lot Jonathan and John Stultz for helping me out with
>>> this
>>>
>>> Changes since v2:
>>> * Add missing include (thanks kernel test robot :D)
>>> * Rework some confusing function return values, specifically
>>> rradc_read_status_in_cont_mode and rradc_prepare_batt_id_conversion
>>> both of which didn't correctly handle "ret". This also bought up an
>>> issue as the previous implementation didn't actually wait for the
>>> channel to be ready. It doesn't seem like that's strictly necessary
>>> (same data is reported if I wait for the status to be good or not)
>>> but I've included it anyway for good measure.
>>>
>>> Changes since v1:
>>> * Rework the RRADC driver based on Jonathan's feedback
>>> * Pick up Rob's reviewed by for the dt-binding patch.
>>> ---
>>> Caleb Connolly (9):
>>> spmi: add a helper to look up an SPMI device from a device node
>>> mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
>>> mfd: qcom-spmi-pmic: read fab id on supported PMICs
>>> dt-bindings: iio: adc: document qcom-spmi-rradc
>>> iio: adc: qcom-spmi-rradc: introduce round robin adc
>>> arm64: dts: qcom: pmi8998: add rradc node
>>> arm64: dts: qcom: sdm845-oneplus: enable rradc
>>> arm64: dts: qcom: sdm845-db845c: enable rradc
>>> arm64: dts: qcom: sdm845-xiaomi-beryllium: enable rradc
>>>
>>> Jami Kettunen (1):
>>> arm64: dts: qcom: msm8998-oneplus-common: enable RRADC
>>>
>>> .../bindings/iio/adc/qcom,spmi-rradc.yaml | 51 +
>>> .../boot/dts/qcom/msm8998-oneplus-common.dtsi | 4 +
>>> arch/arm64/boot/dts/qcom/pmi8998.dtsi | 8 +
>>> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 +
>>> .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 +
>>> .../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 4 +
>>> drivers/iio/adc/Kconfig | 12 +
>>> drivers/iio/adc/Makefile | 1 +
>>> drivers/iio/adc/qcom-spmi-rradc.c | 1021 +++++++++++++++++
>>> drivers/mfd/qcom-spmi-pmic.c | 272 +++--
>>> drivers/spmi/spmi.c | 17 +
>>> include/linux/spmi.h | 3 +
>>> include/soc/qcom/qcom-spmi-pmic.h | 61 +
>>> 13 files changed, 1372 insertions(+), 90 deletions(-)
>>> create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
>>> create mode 100644 drivers/iio/adc/qcom-spmi-rradc.c
>>> create mode 100644 include/soc/qcom/qcom-spmi-pmic.h
>>>
>>
>

\
 
 \ /
  Last update: 2022-06-18 18:13    [W:0.067 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site