lkml.org 
[lkml]   [2022]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V4 18/31] x86/sgx: Support modifying SGX page type
From
Date
On Wed, 2022-04-13 at 14:10 -0700, Reinette Chatre wrote:
> Every enclave contains one or more Thread Control Structures (TCS). The
> TCS contains meta-data used by the hardware to save and restore thread
> specific information when entering/exiting the enclave. With SGX1 an
> enclave needs to be created with enough TCSs to support the largest
> number of threads expecting to use the enclave and enough enclave pages
> to meet all its anticipated memory demands. In SGX1 all pages remain in
> the enclave until the enclave is unloaded.
>
> SGX2 introduces a new function, ENCLS[EMODT], that is used to change
> the type of an enclave page from a regular (SGX_PAGE_TYPE_REG) enclave
> page to a TCS (SGX_PAGE_TYPE_TCS) page or change the type from a
> regular (SGX_PAGE_TYPE_REG) or TCS (SGX_PAGE_TYPE_TCS)
> page to a trimmed (SGX_PAGE_TYPE_TRIM) page (setting it up for later
> removal).
>
> With the existing support of dynamically adding regular enclave pages
> to an initialized enclave and changing the page type to TCS it is
> possible to dynamically increase the number of threads supported by an
> enclave.
>
> Changing the enclave page type to SGX_PAGE_TYPE_TRIM is the first step
> of dynamically removing pages from an initialized enclave. The complete
> page removal flow is:
> 1) Change the type of the pages to be removed to SGX_PAGE_TYPE_TRIM
>    using the SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl() introduced here.
> 2) Approve the page removal by running ENCLU[EACCEPT] from within
>    the enclave.
> 3) Initiate actual page removal using the ioctl() introduced in the
>    following patch.
>
> Add ioctl() SGX_IOC_ENCLAVE_MODIFY_TYPES to support changing SGX
> enclave page types within an initialized enclave. With
> SGX_IOC_ENCLAVE_MODIFY_TYPES the user specifies a page range and the
> enclave page type to be applied to all pages in the provided range.
> The ioctl() itself can return an error code based on failures
> encountered by the kernel. It is also possible for SGX specific
> failures to be encountered.  Add a result output parameter to
> communicate the SGX return code. It is possible for the enclave page
> type change request to fail on any page within the provided range.
> Support partial success by returning the number of pages that were
> successfully changed.
>
> After the page type is changed the page continues to be accessible
> from the kernel perspective with page table entries and internal
> state. The page may be moved to swap. Any access until ENCLU[EACCEPT]
> will encounter a page fault with SGX flag set in error code.
>
> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
> ---
> Changes since V3:
> - Rename ioctl() SGX_IOC_ENCLAVE_MODIFY_TYPE to
>   SGX_IOC_ENCLAVE_MODIFY_TYPES. (Jarkko)
> - User provides just page type, replacing secinfo. (Jarkko)
>
> Changes since V2:
> - Adjust ioctl number after removal of SGX_IOC_ENCLAVE_RELAX_PERMISSIONS.
> - Remove attempt at runtime tracking of EPCM permissions
>   (sgx_encl_page->vm_run_prot_bits). (Jarkko)
> - Change names to follow guidance of using detailed names (Jarkko):
>   struct sgx_enclave_modt -> struct sgx_enclave_modify_type
>   sgx_enclave_modt() -> sgx_enclave_modify_type()
>   sgx_ioc_enclave_modt() -> sgx_ioc_enclave_modify_type()
>
> Changes since V1:
> - Remove the "Earlier changes ..." paragraph (Jarkko).
> - Change "new ioctl" text to "Add SGX_IOC_ENCLAVE_MOD_TYPE" (Jarkko).
> - Discussion about EPCM interaction and the EPCM MODIFIED bit is moved
>   to new patch that introduces the ENCLS[EMODT] wrapper while keeping
>   the higher level discussion on page accessibility in
>   this commit log (Jarkko).
> - Rename SGX_IOC_PAGE_MODT ioctl() to SGX_IOC_ENCLAVE_MODIFY_TYPE
>   (Jarkko).
> - Rename struct sgx_page_modt to struct sgx_enclave_modt in support
>   of ioctl() rename.
> - Rename sgx_page_modt() to sgx_enclave_modt() and sgx_ioc_page_modt()
>   to sgx_ioc_enclave_modt() in support of ioctl() rename.
> - Provide secinfo as parameter to ioctl() instead of just
>   page type (Jarkko).
> - Update comments to refer to new ioctl() names.
> - Use new SGX2 checking helper().
> - Use ETRACK flow utility.
> - Move kernel-doc to function that provides documentation for
>   Documentation/x86/sgx.rst.
> - Remove redundant comment.
> - Use offset/length validation utility.
> - Make explicit which members of struct sgx_enclave_modt are for
>   output (Dave).
>
>  arch/x86/include/uapi/asm/sgx.h |  19 +++
>  arch/x86/kernel/cpu/sgx/ioctl.c | 201 ++++++++++++++++++++++++++++++++
>  2 files changed, 220 insertions(+)
>
> diff --git a/arch/x86/include/uapi/asm/sgx.h b/arch/x86/include/uapi/asm/sgx.h
> index 82648c006470..de4d1af628d5 100644
> --- a/arch/x86/include/uapi/asm/sgx.h
> +++ b/arch/x86/include/uapi/asm/sgx.h
> @@ -31,6 +31,8 @@ enum sgx_page_flags {
>         _IO(SGX_MAGIC, 0x04)
>  #define SGX_IOC_ENCLAVE_RESTRICT_PERMISSIONS \
>         _IOWR(SGX_MAGIC, 0x05, struct sgx_enclave_restrict_permissions)
> +#define SGX_IOC_ENCLAVE_MODIFY_TYPES \
> +       _IOWR(SGX_MAGIC, 0x06, struct sgx_enclave_modify_type)
>  
>  /**
>   * struct sgx_enclave_create - parameter structure for the
> @@ -97,6 +99,23 @@ struct sgx_enclave_restrict_permissions {
>         __u64 count;
>  };
>  
> +/**
> + * struct sgx_enclave_modify_type - parameters for %SGX_IOC_ENCLAVE_MODIFY_TYPES
> + * @offset:    starting page offset (page aligned relative to enclave base
> + *             address defined in SECS)
> + * @length:    length of memory (multiple of the page size)
> + * @page_type: new type for pages in range described by @offset and @length
> + * @result:    (output) SGX result code of ENCLS[EMODT] function
> + * @count:     (output) bytes successfully changed (multiple of page size)
> + */
> +struct sgx_enclave_modify_type {

This should match the ioctl name i.e. "types".

> +       __u64 offset;
> +       __u64 length;
> +       __u64 page_type;
> +       __u64 result;
> +       __u64 count;
> +};
> +
>  struct sgx_enclave_run;
>  
>  /**
> diff --git a/arch/x86/kernel/cpu/sgx/ioctl.c b/arch/x86/kernel/cpu/sgx/ioctl.c
> index 395b4e58a295..8709f131ae40 100644
> --- a/arch/x86/kernel/cpu/sgx/ioctl.c
> +++ b/arch/x86/kernel/cpu/sgx/ioctl.c
> @@ -872,6 +872,204 @@ static long sgx_ioc_enclave_restrict_permissions(struct sgx_encl *encl,
>         return ret;
>  }
>  
> +/**
> + * sgx_enclave_modify_type() - Modify type of SGX enclave pages
> + * @encl:      Enclave to which the pages belong.
> + * @modt:      Checked parameters from user about which pages need modifying
> + *              and their new page type.
> + *
> + * Return:
> + * - 0:                Success
> + * - -errno:   Otherwise
> + */
> +static long sgx_enclave_modify_type(struct sgx_encl *encl,
> +                                   struct sgx_enclave_modify_type *modt)
> +{
> +       unsigned long max_prot_restore;
> +       enum sgx_page_type page_type;
> +       struct sgx_encl_page *entry;
> +       struct sgx_secinfo secinfo;
> +       unsigned long prot;
> +       unsigned long addr;
> +       unsigned long c;
> +       void *epc_virt;
> +       int ret;
> +
> +       page_type = modt->page_type & SGX_PAGE_TYPE_MASK;
> +
> +       /*
> +        * The only new page types allowed by hardware are PT_TCS and PT_TRIM.
> +        */
> +       if (page_type != SGX_PAGE_TYPE_TCS && page_type != SGX_PAGE_TYPE_TRIM)
> +               return -EINVAL;
> +
> +       memset(&secinfo, 0, sizeof(secinfo));
> +
> +       secinfo.flags = page_type << 8;
> +
> +       for (c = 0 ; c < modt->length; c += PAGE_SIZE) {
> +               addr = encl->base + modt->offset + c;
> +
> +               mutex_lock(&encl->lock);
> +
> +               entry = sgx_encl_load_page(encl, addr);
> +               if (IS_ERR(entry)) {
> +                       ret = PTR_ERR(entry) == -EBUSY ? -EAGAIN : -EFAULT;
> +                       goto out_unlock;
> +               }
> +
> +               /*
> +                * Borrow the logic from the Intel SDM. Regular pages
> +                * (SGX_PAGE_TYPE_REG) can change type to SGX_PAGE_TYPE_TCS
> +                * or SGX_PAGE_TYPE_TRIM but TCS pages can only be trimmed.
> +                * CET pages not supported yet.
> +                */
> +               if (!(entry->type == SGX_PAGE_TYPE_REG ||
> +                     (entry->type == SGX_PAGE_TYPE_TCS &&
> +                      page_type == SGX_PAGE_TYPE_TRIM))) {
> +                       ret = -EINVAL;
> +                       goto out_unlock;
> +               }
> +
> +               max_prot_restore = entry->vm_max_prot_bits;
> +
> +               /*
> +                * Once a regular page becomes a TCS page it cannot be
> +                * changed back. So the maximum allowed protection reflects
> +                * the TCS page that is always RW from kernel perspective but
> +                * will be inaccessible from within enclave. Before doing
> +                * so, do make sure that the new page type continues to
> +                * respect the originally vetted page permissions.
> +                */
> +               if (entry->type == SGX_PAGE_TYPE_REG &&
> +                   page_type == SGX_PAGE_TYPE_TCS) {
> +                       if (~entry->vm_max_prot_bits & (VM_READ | VM_WRITE)) {
> +                               ret = -EPERM;
> +                               goto out_unlock;
> +                       }
> +                       prot = PROT_READ | PROT_WRITE;
> +                       entry->vm_max_prot_bits = calc_vm_prot_bits(prot, 0);
> +
> +                       /*
> +                        * Prevent page from being reclaimed while mutex
> +                        * is released.
> +                        */
> +                       if (sgx_unmark_page_reclaimable(entry->epc_page)) {
> +                               ret = -EAGAIN;
> +                               goto out_entry_changed;
> +                       }
> +
> +                       /*
> +                        * Do not keep encl->lock because of dependency on
> +                        * mmap_lock acquired in sgx_zap_enclave_ptes().
> +                        */
> +                       mutex_unlock(&encl->lock);
> +
> +                       sgx_zap_enclave_ptes(encl, addr);
> +
> +                       mutex_lock(&encl->lock);
> +
> +                       sgx_mark_page_reclaimable(entry->epc_page);
> +               }
> +
> +               /* Change EPC type */
> +               epc_virt = sgx_get_epc_virt_addr(entry->epc_page);
> +               ret = __emodt(&secinfo, epc_virt);
> +               if (encls_faulted(ret)) {
> +                       /*
> +                        * All possible faults should be avoidable:
> +                        * parameters have been checked, will only change
> +                        * valid page types, and no concurrent
> +                        * SGX1/SGX2 ENCLS instructions since these are
> +                        * protected with mutex.
> +                        */
> +                       pr_err_once("EMODT encountered exception %d\n",
> +                                   ENCLS_TRAPNR(ret));
> +                       ret = -EFAULT;
> +                       goto out_entry_changed;
> +               }
> +               if (encls_failed(ret)) {
> +                       modt->result = ret;
> +                       ret = -EFAULT;
> +                       goto out_entry_changed;
> +               }
> +
> +               ret = sgx_enclave_etrack(encl);
> +               if (ret) {
> +                       ret = -EFAULT;
> +                       goto out_unlock;
> +               }
> +
> +               entry->type = page_type;
> +
> +               mutex_unlock(&encl->lock);
> +       }
> +
> +       ret = 0;
> +       goto out;
> +
> +out_entry_changed:
> +       entry->vm_max_prot_bits = max_prot_restore;
> +out_unlock:
> +       mutex_unlock(&encl->lock);
> +out:
> +       modt->count = c;
> +
> +       return ret;
> +}
> +
> +/**
> + * sgx_ioc_enclave_modify_type() - handler for %SGX_IOC_ENCLAVE_MODIFY_TYPES
> + * @encl:      an enclave pointer
> + * @arg:       userspace pointer to a &struct sgx_enclave_modify_type instance
> + *
> + * Ability to change the enclave page type supports the following use cases:
> + *
> + * * It is possible to add TCS pages to an enclave by changing the type of
> + *   regular pages (%SGX_PAGE_TYPE_REG) to TCS (%SGX_PAGE_TYPE_TCS) pages.
> + *   With this support the number of threads supported by an initialized
> + *   enclave can be increased dynamically.
> + *
> + * * Regular or TCS pages can dynamically be removed from an initialized
> + *   enclave by changing the page type to %SGX_PAGE_TYPE_TRIM. Changing the
> + *   page type to %SGX_PAGE_TYPE_TRIM marks the page for removal with actual
> + *   removal done by handler of %SGX_IOC_ENCLAVE_REMOVE_PAGES ioctl() called
> + *   after ENCLU[EACCEPT] is run on %SGX_PAGE_TYPE_TRIM page from within the
> + *   enclave.
> + *
> + * Return:
> + * - 0:                Success
> + * - -errno:   Otherwise
> + */
> +static long sgx_ioc_enclave_modify_type(struct sgx_encl *encl, void __user *arg)
> +{
> +       struct sgx_enclave_modify_type params;
> +       long ret;
> +
> +       ret = sgx_ioc_sgx2_ready(encl);
> +       if (ret)
> +               return ret;
> +
> +       if (copy_from_user(&params, arg, sizeof(params)))
> +               return -EFAULT;
> +
> +       if (sgx_validate_offset_length(encl, params.offset, params.length))
> +               return -EINVAL;
> +
> +       if (params.page_type & ~SGX_PAGE_TYPE_MASK)
> +               return -EINVAL;
> +
> +       if (params.result || params.count)
> +               return -EINVAL;
> +
> +       ret = sgx_enclave_modify_type(encl, &params);
> +
> +       if (copy_to_user(arg, &params, sizeof(params)))
> +               return -EFAULT;
> +
> +       return ret;
> +}
> +
>  long sgx_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
>  {
>         struct sgx_encl *encl = filep->private_data;
> @@ -897,6 +1095,9 @@ long sgx_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
>                 ret = sgx_ioc_enclave_restrict_permissions(encl,
>                                                            (void __user *)arg);
>                 break;
> +       case SGX_IOC_ENCLAVE_MODIFY_TYPES:
> +               ret = sgx_ioc_enclave_modify_type(encl, (void __user *)arg);
> +               break;
>         default:
>                 ret = -ENOIOCTLCMD;
>                 break;

Other than that LGTM

BR, Jarkko
\
 
 \ /
  Last update: 2022-04-14 13:13    [W:0.163 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site