lkml.org 
[lkml]   [2022]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ath11k: select QRTR for AHB as well
Date
Currently, ath11k only selects QRTR if ath11k PCI is selected, however
AHB support requires QRTR, more precisely QRTR_SMD because it is using
QMI as well which in turn uses QRTR.

Without QRTR_SMD AHB does not work, so select QRTR in ATH11K and then
select QRTR_SMD for ATH11K_AHB and QRTR_MHI for ATH11K_PCI.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
drivers/net/wireless/ath/ath11k/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/Kconfig b/drivers/net/wireless/ath/ath11k/Kconfig
index ad5cc6cac05b..b45baad184f6 100644
--- a/drivers/net/wireless/ath/ath11k/Kconfig
+++ b/drivers/net/wireless/ath/ath11k/Kconfig
@@ -5,6 +5,7 @@ config ATH11K
depends on CRYPTO_MICHAEL_MIC
select ATH_COMMON
select QCOM_QMI_HELPERS
+ select QRTR
help
This module adds support for Qualcomm Technologies 802.11ax family of
chipsets.
@@ -15,6 +16,7 @@ config ATH11K_AHB
tristate "Atheros ath11k AHB support"
depends on ATH11K
depends on REMOTEPROC
+ select QRTR_SMD
help
This module adds support for AHB bus

@@ -22,7 +24,6 @@ config ATH11K_PCI
tristate "Atheros ath11k PCI support"
depends on ATH11K && PCI
select MHI_BUS
- select QRTR
select QRTR_MHI
help
This module adds support for PCIE bus
--
2.35.1
\
 
 \ /
  Last update: 2022-04-01 11:38    [W:1.018 / U:1.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site