lkml.org 
[lkml]   [2022]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: usb: usb251xb: add documentation for boost-up property
Date
Add documentation for the optional property boost-up.

Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
---
Documentation/devicetree/bindings/usb/usb251xb.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 1a934eab175e..29b5d6521f3c 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -67,6 +67,8 @@ Optional properties :
power. The value is given in ms in a 0 - 510 range (default is 100ms).
- swap-dx-lanes : Specifies the ports which will swap the differential-pair
(D+/D-), default is not-swapped.
+ - boost-up: Property control USB electrical drive strength. There are 4 possible
+ modes: normal (0x00), low (0x01), medium (0x10), high (0x11). Normal default.

Examples:
usb2512b@2c {
--
2.25.1
\
 
 \ /
  Last update: 2022-03-06 19:49    [W:0.061 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site