lkml.org 
[lkml]   [2022]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: xhci: make XHCI_STOP_EP_CMD_TIMEOUT a module parameter
Date
On the Librem 5 imx8mq system we've seen the stop endpoint command
time out regularly which results in the hub dying.

While on the one hand we see "Port resume timed out, port 1-1: 0xfe3"
before this and on the other hand driver-comments suggest that the driver
might be able to recover instead of dying here, Sarah seemed to have a
workaround for this particulator problem in mind already:

Make it a module parameter. So while it might not be the root cause for
the problem, do this to give users a workaround.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/host/xhci.c | 8 +++++++-
drivers/usb/host/xhci.h | 3 +--
3 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index d0b6806275e0..e631d408e6b2 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1133,7 +1133,7 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
xhci_stop_watchdog_timer_in_irq(xhci, ep);

mod_timer(&ep->stop_cmd_timer,
- jiffies + XHCI_STOP_EP_CMD_TIMEOUT * HZ);
+ jiffies + xhci->stop_ep_cmd_timeout * HZ);
xhci_queue_stop_endpoint(xhci, command, slot_id, ep_index, 0);
xhci_ring_cmd_db(xhci);

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index a1c781f70d02..37fd05e75dcf 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -37,6 +37,11 @@ static unsigned long long quirks;
module_param(quirks, ullong, S_IRUGO);
MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");

+static unsigned int stop_ep_cmd_timeout = 5;
+module_param(stop_ep_cmd_timeout, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(stop_ep_cmd_timeout,
+ "Stop endpoint command timeout (secs) for URB cancel watchdog. default=5");
+
static bool td_on_ring(struct xhci_td *td, struct xhci_ring *ring)
{
struct xhci_segment *seg = ring->first_seg;
@@ -1849,7 +1854,7 @@ static int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
}
ep->ep_state |= EP_STOP_CMD_PENDING;
ep->stop_cmd_timer.expires = jiffies +
- XHCI_STOP_EP_CMD_TIMEOUT * HZ;
+ xhci->stop_ep_cmd_timeout * HZ;
add_timer(&ep->stop_cmd_timer);
xhci_queue_stop_endpoint(xhci, command, urb->dev->slot_id,
ep_index, 0);
@@ -5288,6 +5293,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
xhci->hcc_params2 = readl(&xhci->cap_regs->hcc_params2);

xhci->quirks |= quirks;
+ xhci->stop_ep_cmd_timeout = stop_ep_cmd_timeout;

get_quirks(dev, xhci);

diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8a0026ee9524..80c9ced4a276 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1674,8 +1674,6 @@ struct urb_priv {
#define ERST_NUM_SEGS 1
/* Poll every 60 seconds */
#define POLL_TIMEOUT 60
-/* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
-#define XHCI_STOP_EP_CMD_TIMEOUT 5
/* XXX: Make these module parameters */

struct s3_save {
@@ -1899,6 +1897,7 @@ struct xhci_hcd {
#define XHCI_BROKEN_D3COLD BIT_ULL(41)
#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)

+ unsigned int stop_ep_cmd_timeout;
unsigned int num_active_eps;
unsigned int limit_active_eps;
struct xhci_port *hw_ports;
--
2.30.2
\
 
 \ /
  Last update: 2022-03-04 12:31    [W:0.090 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site