lkml.org 
[lkml]   [2022]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: ls1028a: sl28: use ocelot-8021q tagging by default
Date
Enable the ocelot-8021q tagger by default which supports ethernet flow
control.

The new default is set in the common board dtsi. The actual switch
node is enabled on a per board variant basis. Because of this we
set the new tagger default for both internal ports and a particular
variant is free to choose among the two port.

Signed-off-by: Michael Walle <michael@walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 7ef47b80e343..68d11a9c67f3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -328,6 +328,14 @@ &lpuart1 {
status = "okay";
};

+&mscc_felix_port4 {
+ dsa-tag-protocol = "ocelot-8021q";
+};
+
+&mscc_felix_port5 {
+ dsa-tag-protocol = "ocelot-8021q";
+};
+
&usb0 {
status = "okay";
};
--
2.30.2
\
 
 \ /
  Last update: 2022-03-30 13:34    [W:0.469 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site