lkml.org 
[lkml]   [2022]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v11 3/3] arm64: dts: Add mediatek SoC mt8195 and evaluation board
From
Date
Hi Matthias,

Thanks for your comment.

On Mon, 2022-03-28 at 14:26 +0200, Matthias Brugger wrote:
>
> On 16/02/2022 12:31, Tinghan Shen wrote:
> > Add basic chip support for mediatek mt8195.
> >
> > Signed-off-by: Seiya Wang <seiya.wang@mediatek.com>
> > Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> > ---
> > arch/arm64/boot/dts/mediatek/Makefile | 1 +
> > arch/arm64/boot/dts/mediatek/mt8195-evb.dts | 161 +++
> > arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1049 +++++++++++++++++++
> > 3 files changed, 1211 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt8195.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> > index 8c1e18032f9f..5da29e7223e4 100644
> > --- a/arch/arm64/boot/dts/mediatek/Makefile
> > +++ b/arch/arm64/boot/dts/mediatek/Makefile
> > @@ -38,4 +38,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-
> > evb.dts
> > new file mode 100644
> > index 000000000000..51633d91d984
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
> > @@ -0,0 +1,161 @@
>
> [...]
> > +
> > +&u2port0 {
> > + status = "okay";
> > +};
> > +
> > +&u2port1 {
> > + status = "okay";
> > +};
> > +
> > +&u3phy0 {
> > + status="okay";
> > +};
> > +
> > +&u3phy1 {
> > + status="okay";
> > +};
> > +
>
> So we enable phys for xhci but not the device. Are we missing anything to enable
> them on the EVB?

after discussed with usb expert, we think that we're missing the xhci nodes.
I'll add xhci nodes at next version.

>
> > +&uart0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&uart0_pin>;
> > + status = "okay";
> > +};
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > new file mode 100644
> > index 000000000000..a363e82f6988
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > @@ -0,0 +1,1049 @@
>
> [...]
> > +
> > + clk32k: oscillator-32k {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <32768>;
> > + clock-output-names = "clk32k";
>
> I suppose the 32KHz oscillator is really present on the board also not used by
> any device (up to now?).

Yes. 32KHz clock is still available on MT8195.
Some modules can choose 32K as clock source depending on requirements.

>
> [...]
> > +
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + compatible = "simple-bus";
> > + ranges;
> > +
>
> [...]
> > +
> > + pwrap: pwrap@10024000 {
> > + compatible = "mediatek,mt8195-pwrap", "syscon";
> > + reg = <0 0x10024000 0 0x1000>;
> > + reg-names = "pwrap";
> > + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
> > + clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
> > + <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
> > + clock-names = "spi", "wrap";
>
> Binding mandates resets but not present here. It also mandates two register
> regions, but only one is given here.

After discussed with pwrap experts, the pwrap binding is out-of-date for mt8195.
They will send a patch to fix pwrap binding.

>
> > + assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC>;
> > + assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
> > + };
> > +
> > + scp_adsp: clock-controller@10720000 {
> > + compatible = "mediatek,mt8195-scp_adsp";
> > + reg = <0 0x10720000 0 0x1000>;
> > + #clock-cells = <1>;
> > + };
> > +
>
> [...]
>
> > +
> > + mmc0: mmc@11230000 {
> > + compatible = "mediatek,mt8195-mmc",
> > + "mediatek,mt8183-mmc";
> > + reg = <0 0x11230000 0 0x10000>,
> > + <0 0x11f50000 0 0x1000>;
>
> Seems to be an oversight when adding support for mt8183-mmc support to the
> driver. The binding description is missing the optional host top register base.
> Chaotian can you please help to fix this in the binding description.

Ok. I'll fix it at next version.

>
> > + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
> > + clocks = <&topckgen CLK_TOP_MSDC50_0>,
> > + <&infracfg_ao CLK_INFRA_AO_MSDC0>,
> > + <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>;
> > + clock-names = "source", "hclk", "source_cg";
> > + status = "disabled";
> > + };
> > +
>
> [...]
> > +
> > + xhci3: usb@112b0000 {
> > + compatible = "mediatek,mt8195-xhci",
> > + "mediatek,mtk-xhci";
> > + reg = <0 0x112b0000 0 0x1000>,
> > + <0 0x112b3e00 0 0x0100>;
> > + reg-names = "mac", "ippc";
> > + interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
> > + phys = <&u2port3 PHY_TYPE_USB2>;
> > + assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>,
> > + <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
> > + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
> > + <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
> > + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
> > + <&topckgen CLK_TOP_SSUSB_P3_REF>,
> > + <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
> > + clock-names = "sys_ck", "ref_ck", "xhci_ck";
> > + /* This controller is connected with a BT device.
> > + * Disable usb2 lpm to prevent konwn issues.
> > + */
> > + usb2-lpm-disable;
>
> My understanding is, that this depends on the board and not the SoC. Which means
> usb2-lpm-disable should go into any board that has a BT device connected to the
> xhci device (I don't see any active xhci node in mt8195-evb so far).

Ok. I'll move this property to evb board in a xhci node.

Best regards,
TingHan

>
> Regards,
> Matthias

\
 
 \ /
  Last update: 2022-03-29 12:19    [W:0.162 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site