lkml.org 
[lkml]   [2022]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] media: staging: atomisp: rework reading the id and revision values
Date
From: Tom Rix <trix@redhat.com>

Clang static analysis reports this representative issue
atomisp-ov2722.c:920:3: warning: 3rd function call
argument is an uninitialized value
dev_err(&client->dev, "sensor_id_high = 0x%x\n", high);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

high and low are only set when ov2722_read_reg() is successful.
Reporting the high value when there is an error is not
meaningful. The later read for low is not checked. high
and low are or-ed together and checked against a non zero
value.

Remove the unneeded error reporting for high. Initialize
high and low to 0 and use the id check to determine if
the reads were successful

The later read for revision is not checked. If it
fails the old high value will be used and the revision
will be misreported.

Since the revision is only reported and not checked or
stored it is not necessary to return if the read with
successful. This makes the ret variable unnecessary
so remove it.

Signed-off-by: Tom Rix <trix@redhat.com>
---
.../media/atomisp/i2c/atomisp-ov2722.c | 20 ++++++++-----------
1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2722.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2722.c
index da98094d7094a..d5d099ac1b707 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-ov2722.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2722.c
@@ -906,22 +906,17 @@ static int ov2722_get_fmt(struct v4l2_subdev *sd,
static int ov2722_detect(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
- u16 high, low;
- int ret;
+ u16 high = 0, low = 0;
u16 id;
u8 revision;

if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
return -ENODEV;

- ret = ov2722_read_reg(client, OV2722_8BIT,
- OV2722_SC_CMMN_CHIP_ID_H, &high);
- if (ret) {
- dev_err(&client->dev, "sensor_id_high = 0x%x\n", high);
- return -ENODEV;
- }
- ret = ov2722_read_reg(client, OV2722_8BIT,
- OV2722_SC_CMMN_CHIP_ID_L, &low);
+ ov2722_read_reg(client, OV2722_8BIT,
+ OV2722_SC_CMMN_CHIP_ID_H, &high);
+ ov2722_read_reg(client, OV2722_8BIT,
+ OV2722_SC_CMMN_CHIP_ID_L, &low);
id = (high << 8) | low;

if ((id != OV2722_ID) && (id != OV2720_ID)) {
@@ -929,8 +924,9 @@ static int ov2722_detect(struct i2c_client *client)
return -ENODEV;
}

- ret = ov2722_read_reg(client, OV2722_8BIT,
- OV2722_SC_CMMN_SUB_ID, &high);
+ high = 0;
+ ov2722_read_reg(client, OV2722_8BIT,
+ OV2722_SC_CMMN_SUB_ID, &high);
revision = (u8)high & 0x0f;

dev_dbg(&client->dev, "sensor_revision = 0x%x\n", revision);
--
2.26.3
\
 
 \ /
  Last update: 2022-03-26 20:25    [W:0.879 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site