lkml.org 
[lkml]   [2022]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 2/2] arm64: dts: qcom: sm8150: Add ufs power-domain entries
Hi Dmitry,

On Thu, 3 Mar 2022 at 16:02, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On Thu, 3 Mar 2022 at 11:22, Bhupesh Sharma <bhupesh.sharma@linaro.org> wrote:
> >
> > Add power-domain entries for UFS controller & phy nodes
> > in sm8150 dts.
> >
> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Cc: Rob Herring <robh@kernel.org>
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > ---
> > arch/arm64/boot/dts/qcom/sm8150.dtsi | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> > index 6012322a5984..7aa879eb24d7 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> > @@ -1637,6 +1637,8 @@ ufs_mem_hc: ufshc@1d84000 {
> > phy-names = "ufsphy";
> > lanes-per-direction = <2>;
> > #reset-cells = <1>;
> > +
> > + power-domains = <&gcc UFS_PHY_GDSC>;
> > resets = <&gcc GCC_UFS_PHY_BCR>;
> > reset-names = "rst";
> >
> > @@ -1687,6 +1689,9 @@ ufs_mem_phy: phy@1d87000 {
> > clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
> > <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> >
> > + power-domains = <&gcc UFS_CARD_GDSC>,
> > + <&gcc UFS_PHY_GDSC>;
> > + power-domain-names = "ufs_card_gdsc", "ufs_phy_gdsc";
>
> This will not work, if I'm not mistaken. Platform drivers won't bind
> two power-domains by default. And the qmp driver lacks handling for
> power domains.
>
> Also a generic question. I see that other platforms use UFS_PHY_GDSC
> for the host controller and completely ingore the UFS_CARD_GDSC. What
> makes sm8150 so different from the rest of the platforms?

You are right. I used the UFS power-domain constructs presently used
downstream, but I think using UFS_PHY_GDSC only is sufficient for our
use case upstream.

So, I will send a fixed v4 version.

Thanks,
Bhupesh

> > resets = <&ufs_mem_hc 0>;
> > reset-names = "ufsphy";
> > status = "disabled";
> > --
> > 2.35.1
> >
>
>
> --
> With best wishes
> Dmitry

\
 
 \ /
  Last update: 2022-03-23 21:26    [W:0.057 / U:0.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site