lkml.org 
[lkml]   [2022]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v11 2/7] MIPS: Loongson64: dts: introduce ls3A4000 evaluation board
On Wed, Mar 23, 2022 at 09:53:14AM +0800, Sui Jingfeng wrote:
>
> On 2022/3/23 00:06, Jiaxun Yang wrote:
> >
> >
> > 在 2022/3/22 13:38, Sui Jingfeng 写道:
> > >
> > > On 2022/3/22 21:05, Jiaxun Yang wrote:
> > > >
> > > >
> > > > 在 2022/3/21 16:29, Sui Jingfeng 写道:
> > > > > From: suijingfeng <suijingfeng@loongson.cn>
> > > > >
> > > > > The board name is LS3A4000_7A1000_EVB_BOARD_V1.4, it consist of 1.8Ghz
> > > > > mips64r5 4-core CPU and LS7A1000 bridge chip. It has PCIe
> > > > > GEN2 x8 slot,
> > > > > therefore can play with discrete graphics card.
> > > >
> > > > Hi Jingfeng,
> > > >
> > > > As we've discussed before if you are going to introduce new dts
> > > > then you *MUST*
> > > > include it in makefile and wire it up in code.
> > > >
> > > > A dts file doing nothing lying in the tree is just suspicious.
> > > >
> > > > Thanks.
> > > > - Jiaxun
> > > >
> > > Hi, Jiaxun,
> > >
> > > I know what you means, but it is the kernel side developer's job.
> > > I am just a naive graphic driver developer,I can not care so much.
> > > Below is my private patch which can be used to built specific dts
> > > into the linux kernel, therefore make the verification easier.
> > Hi Jingfeng,
> >
> > In kernel world we take care all the stuff we touched ourself :-)
> >
> > If you are not confident with them please drop those DTS from the
> > patchset
> > besides the generic one. I can do the rest for you after getting this
> > set merged.
> >
> > Thanks.
> > - Jiaxun
> >
> Hi, Jiaxun
>
> Build all dts into vmlinuz will make the vmlinuz bigger and bigger.
> How does the kernel get the dtb is another big issue, either from built-in
> dtb or pass from the firmware(pmon and uefi etc). This should be
> solved with another patch carefully. Providing board specific dts
> helps to code review, it helps reviewers understand that there are
> variant boards and have to be express with different OF graph.

Built-in DTBs are for legacy bootloaders that don't understand DT. I
would not expect a new platform to need this.

>
> Now, there are about 6 dts under arch/mips/boot/dts/loongson/,
> Suppose loongson have 1000+ different board, do you want built all
> of them into vmlinuz?

The point was to add the .dts to Makefile so it builds, not so it is
built-in. How are you testing those build with dtc and dtschema if not
added to kbuild?

Rob

\
 
 \ /
  Last update: 2022-03-23 13:53    [W:0.125 / U:25.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site