lkml.org 
[lkml]   [2022]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] hwmon: (pmbus) Add Vin unit off handling
Date
If there is an input undervoltage fault, reported in STATUS_INPUT
command response, there is quite likely a "Unit Off For Insufficient
Input Voltage" condition as well.

Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit
attributes to include both bits in the mask for clearing faults.

If an input undervoltage fault occurs, causing a unit off for
insufficient input voltage, but the unit is off bit is not cleared, the
STATUS_WORD will not be updated to clear the input fault condition.
Including the unit is off bit (bit 3) allows for the input fault
condition to completely clear.

Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
---
drivers/hwmon/pmbus/pmbus.h | 1 +
drivers/hwmon/pmbus/pmbus_core.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index e0aa8aa46d8c..ef3a8ecde4df 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -319,6 +319,7 @@ enum pmbus_fan_mode { percent = 0, rpm };
/*
* STATUS_VOUT, STATUS_INPUT
*/
+#define PB_VOLTAGE_VIN_OFF BIT(3)
#define PB_VOLTAGE_UV_FAULT BIT(4)
#define PB_VOLTAGE_UV_WARNING BIT(5)
#define PB_VOLTAGE_OV_WARNING BIT(6)
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index ac2fbee1ba9c..a0d899dc81f0 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -1373,7 +1373,7 @@ static const struct pmbus_limit_attr vin_limit_attrs[] = {
.reg = PMBUS_VIN_UV_FAULT_LIMIT,
.attr = "lcrit",
.alarm = "lcrit_alarm",
- .sbit = PB_VOLTAGE_UV_FAULT,
+ .sbit = (PB_VOLTAGE_UV_FAULT | PB_VOLTAGE_VIN_OFF),
}, {
.reg = PMBUS_VIN_OV_WARN_LIMIT,
.attr = "max",
--
2.25.1
\
 
 \ /
  Last update: 2022-03-18 00:22    [W:0.035 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site