lkml.org 
[lkml]   [2022]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 32/34] xhci: re-initialize the HC during resume if HCE was set
Date
From: Puma Hsu <pumahsu@google.com>

commit 8b328f8002bcf29ef517ee4bf234e09aabec4d2e upstream.

When HCE(Host Controller Error) is set, it means an internal
error condition has been detected. Software needs to re-initialize
the HC, so add this check in xhci resume.

Cc: stable@vger.kernel.org
Signed-off-by: Puma Hsu <pumahsu@google.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220215123320.1253947-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1083,6 +1083,7 @@ int xhci_resume(struct xhci_hcd *xhci, b
int retval = 0;
bool comp_timer_running = false;
bool pending_portevent = false;
+ bool reinit_xhc = false;

if (!hcd->state)
return 0;
@@ -1099,10 +1100,11 @@ int xhci_resume(struct xhci_hcd *xhci, b
set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);

spin_lock_irq(&xhci->lock);
- if ((xhci->quirks & XHCI_RESET_ON_RESUME) || xhci->broken_suspend)
- hibernated = true;

- if (!hibernated) {
+ if (hibernated || xhci->quirks & XHCI_RESET_ON_RESUME || xhci->broken_suspend)
+ reinit_xhc = true;
+
+ if (!reinit_xhc) {
/*
* Some controllers might lose power during suspend, so wait
* for controller not ready bit to clear, just as in xHC init.
@@ -1135,12 +1137,17 @@ int xhci_resume(struct xhci_hcd *xhci, b
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
- temp = readl(&xhci->op_regs->status);
}

- /* If restore operation fails, re-initialize the HC during resume */
- if ((temp & STS_SRE) || hibernated) {
+ temp = readl(&xhci->op_regs->status);
+
+ /* re-initialize the HC on Restore Error, or Host Controller Error */
+ if (temp & (STS_SRE | STS_HCE)) {
+ reinit_xhc = true;
+ xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp);
+ }

+ if (reinit_xhc) {
if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
!(xhci_all_ports_seen_u0(xhci))) {
del_timer_sync(&xhci->comp_mode_recovery_timer);

\
 
 \ /
  Last update: 2022-02-28 18:35    [W:0.209 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site