lkml.org 
[lkml]   [2022]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 30/34] usb: dwc3: pci: Fix Bay Trail phy GPIO mappings
Date
From: Hans de Goede <hdegoede@redhat.com>

commit 62e3f0afe246720f7646eb1b034a6897dac34405 upstream.

When the Bay Trail phy GPIO mappings where added cs and reset were swapped,
this did not cause any issues sofar, because sofar they were always driven
high/low at the same time.

Note the new mapping has been verified both in /sys/kernel/debug/gpio
output on Android factory images on multiple devices, as well as in
the schematics for some devices.

Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/dwc3-pci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -76,8 +76,8 @@ static const struct acpi_gpio_mapping ac
static struct gpiod_lookup_table platform_bytcr_gpios = {
.dev_id = "0000:00:16.0",
.table = {
- GPIO_LOOKUP("INT33FC:00", 54, "reset", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("INT33FC:02", 14, "cs", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("INT33FC:00", 54, "cs", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("INT33FC:02", 14, "reset", GPIO_ACTIVE_HIGH),
{}
},
};

\
 
 \ /
  Last update: 2022-02-28 18:35    [W:0.209 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site