lkml.org 
[lkml]   [2022]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: Another pass removing cases of 'allOf' containing a '$ref'
Date
Another pass at removing unnecessary use of 'allOf' with a '$ref'.

json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords.

Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: netdev@vger.kernel.org
Cc: linux-phy@lists.infradead.org
Cc: linux-pm@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-spi@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
.../bindings/connector/usb-connector.yaml | 3 +--
.../bindings/display/brcm,bcm2711-hdmi.yaml | 3 +--
.../bindings/display/bridge/adi,adv7511.yaml | 5 ++---
.../bindings/display/bridge/synopsys,dw-hdmi.yaml | 5 ++---
.../bindings/display/panel/display-timings.yaml | 3 +--
.../devicetree/bindings/display/ste,mcde.yaml | 4 ++--
.../devicetree/bindings/input/adc-joystick.yaml | 9 ++++-----
.../bindings/leds/cznic,turris-omnia-leds.yaml | 3 +--
.../devicetree/bindings/leds/leds-lp50xx.yaml | 3 +--
.../devicetree/bindings/mfd/google,cros-ec.yaml | 12 ++++--------
.../devicetree/bindings/mtd/nand-controller.yaml | 8 +++-----
.../bindings/mtd/rockchip,nand-controller.yaml | 3 +--
.../devicetree/bindings/net/ti,cpsw-switch.yaml | 3 +--
.../bindings/phy/phy-stm32-usbphyc.yaml | 3 +--
.../bindings/power/supply/sbs,sbs-manager.yaml | 4 +---
.../bindings/remoteproc/ti,k3-r5f-rproc.yaml | 3 +--
.../devicetree/bindings/soc/ti/ti,pruss.yaml | 15 +++------------
.../devicetree/bindings/sound/st,stm32-sai.yaml | 3 +--
.../devicetree/bindings/sound/tlv320adcx140.yaml | 13 ++++++-------
.../devicetree/bindings/spi/spi-controller.yaml | 4 +---
.../devicetree/bindings/usb/st,stusb160x.yaml | 4 +---
21 files changed, 39 insertions(+), 74 deletions(-)

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7eb8659fa610..0420fa563532 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -104,8 +104,7 @@ properties:
- "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
Type-C Cable and Connector specification, when Power Delivery is not
supported.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
enum:
- default
- 1.5A
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
index a1d5a32660e0..a9d34dd7bbc5 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -72,8 +72,7 @@ properties:
- const: hpd-removed

ddc:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description: >
Phandle of the I2C controller used for DDC EDID probing

diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
index d3dd7a79b909..f08a01dfedf3 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
@@ -76,9 +76,8 @@ properties:

adi,input-depth:
description: Number of bits per color component at the input.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [ 8, 10, 12 ]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 8, 10, 12 ]

adi,input-colorspace:
description: Input color space.
diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
index 9be44a682e67..b00246faea57 100644
--- a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
@@ -26,9 +26,8 @@ properties:
reg-io-width:
description:
Width (in bytes) of the registers specified by the reg property.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [1, 4]
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 4]
default: 1

clocks:
diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
index 56903ded005e..6d30575819d3 100644
--- a/Documentation/devicetree/bindings/display/panel/display-timings.yaml
+++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
@@ -31,8 +31,7 @@ properties:
patternProperties:
"^timing":
type: object
- allOf:
- - $ref: panel-timing.yaml#
+ $ref: panel-timing.yaml#

additionalProperties: false

diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml
index de0c678b3c29..564ea845c82e 100644
--- a/Documentation/devicetree/bindings/display/ste,mcde.yaml
+++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml
@@ -58,8 +58,8 @@ patternProperties:
"^dsi@[0-9a-f]+$":
description: subnodes for the three DSI host adapters
type: object
- allOf:
- - $ref: dsi-controller.yaml#
+ $ref: dsi-controller.yaml#
+
properties:
compatible:
const: ste,mcde-dsi
diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
index 721878d5b7af..2ee04e03bc22 100644
--- a/Documentation/devicetree/bindings/input/adc-joystick.yaml
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -61,11 +61,10 @@ patternProperties:
description: EV_ABS specific event code generated by the axis.

abs-range:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - items:
- - description: minimum value
- - description: maximum value
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: minimum value
+ - description: maximum value
description: >
Minimum and maximum values produced by the axis.
For an ABS_X axis this will be the left-most and right-most
diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
index c7ed2871da06..9362b1ef9e88 100644
--- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -32,8 +32,7 @@ properties:
patternProperties:
"^multi-led@[0-9a-b]$":
type: object
- allOf:
- - $ref: leds-class-multicolor.yaml#
+ $ref: leds-class-multicolor.yaml#
description:
This node represents one of the RGB LED devices on Turris Omnia.
No subnodes need to be added for subchannels since this controller only
diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
index c192b5feadc7..f12fe5b53f30 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -55,8 +55,7 @@ properties:
patternProperties:
'^multi-led@[0-9a-f]$':
type: object
- allOf:
- - $ref: leds-class-multicolor.yaml#
+ $ref: leds-class-multicolor.yaml#
properties:
reg:
minItems: 1
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index d1f53bd449f7..a52f3a82283c 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -38,18 +38,14 @@ properties:
description:
This property specifies the delay in usecs between the
assertion of the CS and the first clock pulse.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - default: 0
- - minimum: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0

google,cros-ec-spi-msg-delay:
description:
This property specifies the delay in usecs between messages.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - default: 0
- - minimum: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0

google,has-vbc-nvram:
description:
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index bd217e6f5018..0714f614550d 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -58,8 +58,7 @@ patternProperties:
Contains the native Ready/Busy IDs.

nand-ecc-engine:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/phandle
+ $ref: /schemas/types.yaml#/definitions/phandle
description: |
A phandle on the hardware ECC engine if any. There are
basically three possibilities:
@@ -79,9 +78,8 @@ patternProperties:
description: Do not use any ECC correction.

nand-ecc-placement:
- allOf:
- - $ref: /schemas/types.yaml#/definitions/string
- - enum: [ oob, interleaved ]
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ oob, interleaved ]
description:
Location of the ECC bytes. This location is unknown by default
but can be explicitly set to "oob", if all ECC bytes are
diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
index 0922536b1811..d681a4676f06 100644
--- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
@@ -96,8 +96,7 @@ patternProperties:

rockchip,boot-ecc-strength:
enum: [16, 24, 40, 60, 70]
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
If specified it indicates that a different BCH/ECC setting is
supported by the boot ROM.
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index 07a00f53adbf..31bf825c6598 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -88,8 +88,7 @@ properties:
type: object
description: CPSW external ports

- allOf:
- - $ref: ethernet-controller.yaml#
+ $ref: ethernet-controller.yaml#

properties:
reg:
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 267b695215b6..dc287d428e49 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -76,8 +76,7 @@ patternProperties:

connector:
type: object
- allOf:
- - $ref: ../connector/usb-connector.yaml
+ $ref: /schemas/connector/usb-connector.yaml
properties:
vbus-supply: true

diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
index 72e8f274c791..99f506d6b0a0 100644
--- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
@@ -46,9 +46,7 @@ additionalProperties: false
patternProperties:
"^i2c@[1-4]$":
type: object
-
- allOf:
- - $ref: /schemas/i2c/i2c-controller.yaml#
+ $ref: /schemas/i2c/i2c-controller.yaml#

examples:
- |
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
index 0868154a0364..fb9605f0655b 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -95,8 +95,7 @@ patternProperties:
addresses. Cache and memory access settings are provided through a
Memory Protection Unit (MPU), programmable only from the R5Fs.

- allOf:
- - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+ $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#

properties:
compatible:
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
index 9d128b9e7deb..64461d432004 100644
--- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -281,10 +281,7 @@ patternProperties:
PRUSS INTC Node. Each PRUSS has a single interrupt controller instance
that is common to all the PRU cores. This should be represented as an
interrupt-controller node.
-
- allOf:
- - $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml#
-
+ $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml#
type: object

mdio@[a-f0-9]+$:
@@ -292,10 +289,7 @@ patternProperties:
MDIO Node. Each PRUSS has an MDIO module that can be used to control
external PHYs. The MDIO module used within the PRU-ICSS is an instance of
the MDIO Controller used in TI Davinci SoCs.
-
- allOf:
- - $ref: /schemas/net/ti,davinci-mdio.yaml#
-
+ $ref: /schemas/net/ti,davinci-mdio.yaml#
type: object

"^(pru|rtu|txpru)@[0-9a-f]+$":
@@ -305,10 +299,7 @@ patternProperties:
inactive by using the standard DT string property, "status". The ICSSG IP
present on K3 SoCs have additional auxiliary PRU cores with slightly
different IP integration.
-
- allOf:
- - $ref: /schemas/remoteproc/ti,pru-rproc.yaml#
-
+ $ref: /schemas/remoteproc/ti,pru-rproc.yaml#
type: object

required:
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index d4fc8fdcb72f..b3dbcba33e41 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -115,8 +115,7 @@ patternProperties:
By default, custom protocol is assumed, meaning that protocol is
configured according to protocol defined in related DAI link node,
such as i2s, left justified, right justified, dsp and pdm protocols.
- allOf:
- - $ref: /schemas/types.yaml#/definitions/flag
+ $ref: /schemas/types.yaml#/definitions/flag

"#clock-cells":
description: Configure the SAI device as master clock provider.
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
index d77c8283526d..2ad17b361db0 100644
--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -176,13 +176,12 @@ patternProperties:
4 - Drive weak low and active high
5 - Drive Hi-Z and active high

- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32-array
- - minItems: 2
- maxItems: 2
- items:
- maximum: 15
- default: [2, 2]
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ items:
+ maximum: 15
+ default: [2, 2]

required:
- compatible
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 36b72518f565..6d0511a8727f 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -93,9 +93,7 @@ properties:
patternProperties:
"^.*@[0-9a-f]+$":
type: object
-
- allOf:
- - $ref: spi-peripheral-props.yaml
+ $ref: spi-peripheral-props.yaml

required:
- compatible
diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
index ead1571e0e43..b5a8c9814dd3 100644
--- a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
+++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
@@ -32,9 +32,7 @@ properties:

connector:
type: object
-
- allOf:
- - $ref: ../connector/usb-connector.yaml
+ $ref: /schemas/connector/usb-connector.yaml#

properties:
compatible:
--
2.32.0
\
 
 \ /
  Last update: 2022-02-28 22:38    [W:0.080 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site