lkml.org 
[lkml]   [2022]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 7/7] irqchip/apple-aic: Add support for AICv2
On Thu, 24 Feb 2022 13:07:41 +0000,
Hector Martin <marcan@marcan.st> wrote:
>
> Introduce support for the new AICv2 hardware block in t6000/t6001 SoCs.
>
> It seems these blocks are missing the information required to compute
> the event register offset in the capability registers, so we specify
> that in the DT.
>
> Signed-off-by: Hector Martin <marcan@marcan.st>
> ---
> drivers/irqchip/irq-apple-aic.c | 148 ++++++++++++++++++++++++++++----
> 1 file changed, 129 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/irqchip/irq-apple-aic.c b/drivers/irqchip/irq-apple-aic.c
> index 93c622435ba2..602c8b274170 100644
> --- a/drivers/irqchip/irq-apple-aic.c
> +++ b/drivers/irqchip/irq-apple-aic.c
> @@ -103,6 +103,57 @@
>
> #define AIC_MAX_IRQ 0x400
>
> +/*
> + * AIC v2 registers (MMIO)
> + */
> +
> +#define AIC2_VERSION 0x0000
> +#define AIC2_VERSION_VER GENMASK(7, 0)
> +
> +#define AIC2_INFO1 0x0004
> +#define AIC2_INFO1_NR_IRQ GENMASK(15, 0)
> +#define AIC2_INFO1_LAST_DIE GENMASK(27, 24)
> +
> +#define AIC2_INFO2 0x0008
> +
> +#define AIC2_INFO3 0x000c
> +#define AIC2_INFO3_MAX_IRQ GENMASK(15, 0)
> +#define AIC2_INFO3_MAX_DIE GENMASK(27, 24)
> +
> +#define AIC2_RESET 0x0010
> +#define AIC2_RESET_RESET BIT(0)
> +
> +#define AIC2_CONFIG 0x0014
> +#define AIC2_CONFIG_ENABLE BIT(0)
> +#define AIC2_CONFIG_PREFER_PCPU BIT(28)
> +
> +#define AIC2_TIMEOUT 0x0028
> +#define AIC2_CLUSTER_PRIO 0x0030
> +#define AIC2_DELAY_GROUPS 0x0100
> +
> +#define AIC2_IRQ_CFG 0x2000
> +
> +/*
> + * AIC2 registers are laid out like this, starting at AIC2_IRQ_CFG:
> + *
> + * Repeat for each die:
> + * IRQ_CFG: u32 * MAX_IRQS
> + * SW_SET: u32 * (MAX_IRQS / 32)
> + * SW_CLR: u32 * (MAX_IRQS / 32)
> + * MASK_SET: u32 * (MAX_IRQS / 32)
> + * MASK_CLR: u32 * (MAX_IRQS / 32)
> + * HW_STATE: u32 * (MAX_IRQS / 32)
> + *
> + * This is followed by a set of event registers, each 16K page aligned.
> + * The first one is the AP event register we will use. Unfortunately,
> + * the actual implemented die count is not specified anywhere in the
> + * capability registers, so we have to explicitly specify the event
> + * register offset in the device tree to remain forward-compatible.
> + */
> +
> +#define AIC2_IRQ_CFG_TARGET GENMASK(3, 0)
> +#define AIC2_IRQ_CFG_DELAY_IDX GENMASK(7, 5)
> +
> #define MASK_REG(x) (4 * ((x) >> 5))
> #define MASK_BIT(x) BIT((x) & GENMASK(4, 0))
>
> @@ -193,6 +244,7 @@ struct aic_info {
> /* Register offsets */
> u32 event;
> u32 target_cpu;
> + u32 irq_cfg;
> u32 sw_set;
> u32 sw_clr;
> u32 mask_set;
> @@ -220,6 +272,14 @@ static const struct aic_info aic1_fipi_info = {
> .fast_ipi = true,
> };
>
> +static const struct aic_info aic2_info = {
> + .version = 2,
> +
> + .irq_cfg = AIC2_IRQ_CFG,
> +
> + .fast_ipi = true,
> +};
> +
> static const struct of_device_id aic_info_match[] = {
> {
> .compatible = "apple,t8103-aic",
> @@ -229,6 +289,10 @@ static const struct of_device_id aic_info_match[] = {
> .compatible = "apple,aic",
> .data = &aic1_info,
> },
> + {
> + .compatible = "apple,aic2",
> + .data = &aic2_info,
> + },
> {}
> };
>
> @@ -373,6 +437,14 @@ static struct irq_chip aic_chip = {
> .irq_set_type = aic_irq_set_type,
> };
>
> +static struct irq_chip aic2_chip = {
> + .name = "AIC2",
> + .irq_mask = aic_irq_mask,
> + .irq_unmask = aic_irq_unmask,
> + .irq_eoi = aic_irq_eoi,
> + .irq_set_type = aic_irq_set_type,
> +};
> +
> /*
> * FIQ irqchip
> */
> @@ -529,10 +601,15 @@ static struct irq_chip fiq_chip = {
> static int aic_irq_domain_map(struct irq_domain *id, unsigned int irq,
> irq_hw_number_t hw)
> {
> + struct aic_irq_chip *ic = id->host_data;
> u32 type = FIELD_GET(AIC_EVENT_TYPE, hw);
> + struct irq_chip *chip = &aic_chip;
> +
> + if (ic->info.version == 2)
> + chip = &aic2_chip;
>
> if (type == AIC_EVENT_TYPE_IRQ) {
> - irq_domain_set_info(id, irq, hw, &aic_chip, id->host_data,
> + irq_domain_set_info(id, irq, hw, chip, id->host_data,
> handle_fasteoi_irq, NULL, NULL);
> irqd_set_single_target(irq_desc_get_irq_data(irq_to_desc(irq)));
> } else {
> @@ -888,24 +965,26 @@ static int aic_init_cpu(unsigned int cpu)
> /* Commit all of the above */
> isb();
>
> - /*
> - * Make sure the kernel's idea of logical CPU order is the same as AIC's
> - * If we ever end up with a mismatch here, we will have to introduce
> - * a mapping table similar to what other irqchip drivers do.
> - */
> - WARN_ON(aic_ic_read(aic_irqc, AIC_WHOAMI) != smp_processor_id());
> + if (aic_irqc->info.version == 1) {
> + /*
> + * Make sure the kernel's idea of logical CPU order is the same as AIC's
> + * If we ever end up with a mismatch here, we will have to introduce
> + * a mapping table similar to what other irqchip drivers do.
> + */
> + WARN_ON(aic_ic_read(aic_irqc, AIC_WHOAMI) != smp_processor_id());

Don't you have a similar issue with AICv2? Or is it that AICv2
doesn't have this register?

Thanks,

M.

--
Without deviation from the norm, progress is not possible.

\
 
 \ /
  Last update: 2022-02-25 16:29    [W:0.126 / U:0.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site