lkml.org 
[lkml]   [2022]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/6] PCI: qcom: Add SM8150 SoC support
On Wed, 23 Feb 2022 at 22:30, Bhupesh Sharma <bhupesh.sharma@linaro.org> wrote:
>
> The PCIe IP (rev 1.5.0) on SM8150 SoC is similar to the one used on
> SM8250. Hence the support is added reusing the members of ops_2_7_0.
>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index c19cd506ed3f..66fbc0234888 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1487,6 +1487,17 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
> .config_sid = qcom_pcie_config_sid_sm8250,
> };
>
> +/* Qcom IP rev.: 1.5.0 */
> +static const struct qcom_pcie_ops ops_1_5_0 = {
> + .get_resources = qcom_pcie_get_resources_2_7_0,
> + .init = qcom_pcie_init_2_7_0,
> + .deinit = qcom_pcie_deinit_2_7_0,
> + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> + .post_init = qcom_pcie_post_init_2_7_0,
> + .post_deinit = qcom_pcie_post_deinit_2_7_0,
> + .config_sid = qcom_pcie_config_sid_sm8250,
> +};
> +
> static const struct qcom_pcie_cfg apq8084_cfg = {
> .ops = &ops_1_0_0,
> };
> @@ -1511,6 +1522,10 @@ static const struct qcom_pcie_cfg sdm845_cfg = {
> .ops = &ops_2_7_0,
> };
>
> +static const struct qcom_pcie_cfg sm8150_cfg = {
> + .ops = &ops_1_5_0,
> +};
> +
> static const struct qcom_pcie_cfg sm8250_cfg = {
> .ops = &ops_1_9_0,
> };
> @@ -1626,6 +1641,7 @@ static const struct of_device_id qcom_pcie_match[] = {
> { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg },
> { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg },
> { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg },
> + { .compatible = "qcom,pcie-sm8150", .data = &sm8150_cfg },
> { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg },
> { .compatible = "qcom,pcie-sc8180x", .data = &sm8250_cfg },
> { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg },
> --
> 2.35.1
>


--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2022-02-23 22:52    [W:0.079 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site