lkml.org 
[lkml]   [2022]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 00/18] Multiple addition to ipq8064 dtsi
On Fri, Feb 18, 2022 at 01:29:38AM +0100, Ansuel Smith wrote:
> This try to complete the ipq8064 dtsi and introduce 2 new dtsi
> ipq8064-v2 and ipq8065. While some node are still missing (cpufreq node,
> l2 scale node, fab scale node) this would add most of the missing node
> to make ipq8064 actually usable.
>
> Some of the changes are the fix for the pci IO that cause any secondary
> wifi card with ath10k to fail init.
> Adds regulators definition for RPM.
> Adds many missing gsbi nodes used by all the devices.
> Enable the usb phy by default as they are actually enabled internally by
> xlate only if the dwc3 driver is used.
> Add opp table and declare idle state for ipq8064.
> Fix some dtc warning.
>
> This also add the ipq8064-v2.0 dtsi and the ipq8065 dtsi used by more
> recent devices based on this SoC.

A couple of comments directly on 2 patches, but otherwise for the set:

Tested-by: Jonathan McDowell <noodles@earth.li>

> v2:
> - Added missing patch
> - Added additional gsbi6 spi
> - Added extra description for L2 cache opp
> - Fxied smb208 enabled by default that is problematic for rb3011 devices
>
> Ansuel Smith (18):
> ARM: dts: qcom: add multiple missing pin definition for ipq8064
> ARM: dts: qcom: add gsbi6 missing definition for ipq8064
> ARM: dts: qcom: add missing rpm regulators and cells for ipq8064
> ARM: dts: qcom: disable smb208 regulators for ipq8064-rb3011
> ARM: dts: qcom: add missing snps,dwmac compatible for gmac ipq8064
> ARM: dts: qcom: enable usb phy by default for ipq8064
> ARM: dts: qcom: reduce pci IO size to 64K for ipq8064
> ARM: dts: qcom: fix dtc warning for missing #address-cells for ipq8064
> ARM: dts: qcom: add smem node for ipq8064
> ARM: dts: qcom: add saw for l2 cache and kraitcc for ipq8064
> ARM: dts: qcom: add sic non secure node for ipq8064
> ARM: dts: qcom: fix and add some missing gsbi node for ipq8064
> ARM: dts: qcom: add opp table for cpu and l2 for ipq8064
> ARM: dts: qcom: add speedbin efuse nvmem binding
> ARM: dts: qcom: add multiple missing binding for cpu and l2 for
> ipq8064
> ARM: dts: qcom: remove redundant binding from ipq8064 rb3011 dts
> ARM: dts: qcom: add ipq8064-v2.0 dtsi
> ARM: dts: qcom: add ipq8065 dtsi
>
> arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 21 +-
> arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi | 70 ++++
> arch/arm/boot/dts/qcom-ipq8064.dtsi | 375 +++++++++++++++++++++-
> arch/arm/boot/dts/qcom-ipq8065.dtsi | 168 ++++++++++
> 4 files changed, 603 insertions(+), 31 deletions(-)
> create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
> create mode 100644 arch/arm/boot/dts/qcom-ipq8065.dtsi
>
> --
> 2.34.1
>

J.

--
"evilwm - we sold our souls to the window manager" --
http://www.6809.org.uk/evilwm/

\
 
 \ /
  Last update: 2022-02-22 21:07    [W:0.140 / U:0.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site