lkml.org 
[lkml]   [2022]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 15/18] ARM: dts: qcom: add multiple missing binding for cpu and l2 for ipq8064
    Date
    Add multiple binding for cpu node, l2 node and add idle-states
    definition for ipq8064 dtsi.

    Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
    ---
    arch/arm/boot/dts/qcom-ipq8064.dtsi | 36 +++++++++++++++++++++++++++++
    1 file changed, 36 insertions(+)

    diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
    index 629e22236f5b..1079572f4f5d 100644
    --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
    +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
    @@ -30,6 +30,16 @@ cpu0: cpu@0 {
    next-level-cache = <&L2>;
    qcom,acc = <&acc0>;
    qcom,saw = <&saw0>;
    + clocks = <&kraitcc 0>, <&kraitcc 4>;
    + clock-names = "cpu", "l2";
    + clock-latency = <100000>;
    + cpu-supply = <&smb208_s2a>;
    + operating-points-v2 = <&opp_table0>;
    + voltage-tolerance = <5>;
    + cooling-min-state = <0>;
    + cooling-max-state = <10>;
    + #cooling-cells = <2>;
    + cpu-idle-states = <&CPU_SPC>;
    };

    cpu1: cpu@1 {
    @@ -40,11 +50,37 @@ cpu1: cpu@1 {
    next-level-cache = <&L2>;
    qcom,acc = <&acc1>;
    qcom,saw = <&saw1>;
    + clocks = <&kraitcc 1>, <&kraitcc 4>;
    + clock-names = "cpu", "l2";
    + clock-latency = <100000>;
    + cpu-supply = <&smb208_s2b>;
    + operating-points-v2 = <&opp_table0>;
    + voltage-tolerance = <5>;
    + cooling-min-state = <0>;
    + cooling-max-state = <10>;
    + #cooling-cells = <2>;
    + cpu-idle-states = <&CPU_SPC>;
    + };
    +
    + idle-states {
    + CPU_SPC: spc {
    + compatible = "qcom,idle-state-spc";
    + status = "disabled";
    + entry-latency-us = <400>;
    + exit-latency-us = <900>;
    + min-residency-us = <3000>;
    + };
    };

    L2: l2-cache {
    compatible = "cache";
    cache-level = <2>;
    + qcom,saw = <&saw_l2>;
    +
    + clocks = <&kraitcc 4>;
    + clock-names = "l2";
    + l2-supply = <&smb208_s1a>;
    + operating-points-v2 = <&opp_table_l2>;
    };
    };

    --
    2.34.1
    \
     
     \ /
      Last update: 2022-02-18 01:40    [W:4.048 / U:0.284 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site